Hope this guide can help someone!
Thanks for all your help on these groups
http://www.angelfire.com/vi/pueet/HP...IIp/hplaserjet
Moe Wodnicki wrote:
> This one isn't covered in any book, density control board is bad.
>
> Laser Service
> 1449 Aviation Blvd.
> Redondo Beach, CA 90278
>
> www.laser-service.com
>
>
> "Phil Bert" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> >
> > The status read-out says:
> >
> > 12 OPEN
> > OR NO EP-L
> >
> > The manual describes this as:
> >
> > "This message appears when either the printer is not closed
properly,
> > the EP-L cartridge is missing, or the cooling fan is not working."
> >
> >
> > But the printer is closed tight, securely and squarely, there is a
2
> > week old cartridge installed that I used last night, and the
> > ventilation fa is running fine.
> >
> > Any ideas?
> >
> > Thanks!
> >
> > Bert
Similar Threads
