If the PC is connected directly to the internet you have two options...
1. Use the 'ipconfig' command to get the current from your ISP...
2. Use the
http://www.whatismyip.com site to get the current from your ISP.
If your behind a dedicated firewall/NAT/router...
1. Use the
http://www.whatismyip.com site.
In all cases you call the public IP address, not the private 192.168.x.x address.
If your behind a dedicated firewall/NAT/router...You also must have TCP Port 3389 forwarded through
the firewall/NAT/router device to the private 192.168.x.x address.
If your ISP provides a DHCP assigned IP address, look at using one of the dynamic DNS services that
map a fully qualified domain name to the DHCP assigned IP address. Typically a small program runs on
the PC and contacts the dynamic DNS services server on a periodic basis. The IP is mapped to the
name and that information is propagated over the public internet. Call using the fully qualified
domain name. I use a *FREE* service from No-IP.com
http://www.no-ip.com
Others, some free some $$$$, are listed here...
http://www.remotenetworktechnology.c...%2FConnections
If your ISP provides a static IP address, use that...
--
Al
Please post *ALL* questions and replies to the news group for the mutual
benefit of all of us...Unsolicited personal emails are *NOT* answered.
"neil c" <(E-Mail Removed)> wrote in message news:32ff01c33fd7$5c69ec30$(E-Mail Removed)...
> i have my server set up for remote desktop and it works
> fine within the local network when i use the local address
> of 192.168.0.1
> however when i want to access it over the internet from
> another location what address should i use as 192.168.0.1
> is just a local address.
> how do i find the right address to use?
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (
http://www.grisoft.com).
Version: 6.0.495 / Virus Database: 294 - Release Date: 6/30/2003
Similar Threads
