With my monitor (LG Studioworks 775E), I've always been able to run 1280x1024
at 85 Hz, but after I installed Vista, it wont let me select 85 Hz.
Only 60, 86 and 94 Hz.
At 86 Hz, the monitor goes out of whack.

I'm using an ATi Radeon 9800 Pro.

How do I set 85 Hz? 60 Hz is killing my eyes, and I can set 85 Hz only with
1024x768, but I am not comfortable with that resolution.

Hmm... if it won't let you change it, it's because the OS can't handle it or
the hardware can't handle it. Change the resolution by going into Control
Panel > Personlisation > Display (I think) to change it from there.

--
Zack Whittaker
» ZackNET Enterprises: www.zacknet.co.uk
» MSBlog on ResDev: www.msblog.org
» Vista Knowledge Base: www.vistabase.co.uk
» This mailing is provided "as is" with no warranties, and confers no
rights. All opinions expressed are those of myself unless stated so, and not
of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
that up!

--: Original message follows :--
"Dragen" <(E-Mail Removed)> wrote in message
news:9DF9B9CF-10C7-459C-B6F4-(E-Mail Removed)...
> With my monitor (LG Studioworks 775E), I've always been able to run
> 1280x1024
> at 85 Hz, but after I installed Vista, it wont let me select 85 Hz.
> Only 60, 86 and 94 Hz.
> At 86 Hz, the monitor goes out of whack.
>
> I'm using an ATi Radeon 9800 Pro.
>
> How do I set 85 Hz? 60 Hz is killing my eyes, and I can set 85 Hz only
> with
> 1024x768, but I am not comfortable with that resolution.

I knew MS would mess something vital for me up.
60 Hz isnt healthy for your eyes, and 85 Hz is kinda standard on most
monitors made in the last 10 years (even my old 15" ibm monitor supported
it). And since Ive used 85 Hz with 1280x1024 for years now with 2000/XP, I
can't see why my hardware would suddenly stop supporting it.
Unless this is changed in an upcoming build, I'm sticking to XP or changing
to Linux (yuck!).

"Zack Whittaker" wrote:

> Hmm... if it won't let you change it, it's because the OS can't handle it or
> the hardware can't handle it. Change the resolution by going into Control
> Panel > Personlisation > Display (I think) to change it from there.
>
> --
> Zack Whittaker
> » ZackNET Enterprises: www.zacknet.co.uk
> » MSBlog on ResDev: www.msblog.org
> » Vista Knowledge Base: www.vistabase.co.uk
> » This mailing is provided "as is" with no warranties, and confers no
> rights. All opinions expressed are those of myself unless stated so, and not
> of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
> that up!
>
> --: Original message follows :--
> "Dragen" <(E-Mail Removed)> wrote in message
> news:9DF9B9CF-10C7-459C-B6F4-(E-Mail Removed)...
> > With my monitor (LG Studioworks 775E), I've always been able to run
> > 1280x1024
> > at 85 Hz, but after I installed Vista, it wont let me select 85 Hz.
> > Only 60, 86 and 94 Hz.
> > At 86 Hz, the monitor goes out of whack.
> >
> > I'm using an ATi Radeon 9800 Pro.
> >
> > How do I set 85 Hz? 60 Hz is killing my eyes, and I can set 85 Hz only
> > with
> > 1024x768, but I am not comfortable with that resolution.
>
>
>

use the catylist control panel.
downlod the beta drivers from ATI and use the correct installation instructions from there to install the control panel.



(E-Mail Removed)



"Dragen" <(E-Mail Removed)> wrote in message news:9DF9B9CF-10C7-459C-B6F4-(E-Mail Removed)...
With my monitor (LG Studioworks 775E), I've always been able to run 1280x1024
at 85 Hz, but after I installed Vista, it wont let me select 85 Hz.
Only 60, 86 and 94 Hz.
At 86 Hz, the monitor goes out of whack.

I'm using an ATi Radeon 9800 Pro.

How do I set 85 Hz? 60 Hz is killing my eyes, and I can set 85 Hz only with
1024x768, but I am not comfortable with that resolution.

you can try 4 things

1) go to display settings> advanced settings> monitor (tab)> and uncheck the
box that says:
[hide modes that this monitor cannot display]

2) try installing the ATI drivers & catalyst as another poster said

3) download the monitor drivers from LG, that will tell windows what refresh
rate to use

4) download and install a program called powerstrip that lets you over ride
any setting in windows
(WARNING: do this with extream caution)
http://www.entechtaiwan.com/ps.htm



"Dragen" <(E-Mail Removed)> wrote in message
news:451564ED-0F38-4016-9AB3-(E-Mail Removed)...
>I knew MS would mess something vital for me up.
> 60 Hz isnt healthy for your eyes, and 85 Hz is kinda standard on most
> monitors made in the last 10 years (even my old 15" ibm monitor supported
> it). And since Ive used 85 Hz with 1280x1024 for years now with 2000/XP, I
> can't see why my hardware would suddenly stop supporting it.
> Unless this is changed in an upcoming build, I'm sticking to XP or
> changing
> to Linux (yuck!).
>
> "Zack Whittaker" wrote:
>
>> Hmm... if it won't let you change it, it's because the OS can't handle it
>> or
>> the hardware can't handle it. Change the resolution by going into Control
>> Panel > Personlisation > Display (I think) to change it from there.
>>
>> --
>> Zack Whittaker
>> » ZackNET Enterprises: www.zacknet.co.uk
>> » MSBlog on ResDev: www.msblog.org
>> » Vista Knowledge Base: www.vistabase.co.uk
>> » This mailing is provided "as is" with no warranties, and confers no
>> rights. All opinions expressed are those of myself unless stated so, and
>> not
>> of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
>> that up!
>>
>> --: Original message follows :--
>> "Dragen" <(E-Mail Removed)> wrote in message
>> news:9DF9B9CF-10C7-459C-B6F4-(E-Mail Removed)...
>> > With my monitor (LG Studioworks 775E), I've always been able to run
>> > 1280x1024
>> > at 85 Hz, but after I installed Vista, it wont let me select 85 Hz.
>> > Only 60, 86 and 94 Hz.
>> > At 86 Hz, the monitor goes out of whack.
>> >
>> > I'm using an ATi Radeon 9800 Pro.
>> >
>> > How do I set 85 Hz? 60 Hz is killing my eyes, and I can set 85 Hz only
>> > with
>> > 1024x768, but I am not comfortable with that resolution.
>>
>>
>>

my system:
P-D 930 / 2GB 667 / 250G SATA2 / X1300 256MB / VX2025WM
only have 59Hz, no other choice

"mikeyhsd" wrote:

> use the catylist control panel.
> downlod the beta drivers from ATI and use the correct installation instructions from there to install the control panel.
>
>
>
> (E-Mail Removed)
>
>
>
> "Dragen" <(E-Mail Removed)> wrote in message news:9DF9B9CF-10C7-459C-B6F4-(E-Mail Removed)...
> With my monitor (LG Studioworks 775E), I've always been able to run 1280x1024
> at 85 Hz, but after I installed Vista, it wont let me select 85 Hz.
> Only 60, 86 and 94 Hz.
> At 86 Hz, the monitor goes out of whack.
>
> I'm using an ATi Radeon 9800 Pro.
>
> How do I set 85 Hz? 60 Hz is killing my eyes, and I can set 85 Hz only with
> 1024x768, but I am not comfortable with that resolution

does that mean that you have installed the beta drives and ati control panel and using it you can still not get the desired refresh rate.
I know I like 70 but it only gives me 72 as a choice.



(E-Mail Removed)



"willy" <(E-Mail Removed)> wrote in message news:2F773868-30C0-4F9D-872F-(E-Mail Removed)...
my system:
P-D 930 / 2GB 667 / 250G SATA2 / X1300 256MB / VX2025WM
only have 59Hz, no other choice

"mikeyhsd" wrote:

> use the catylist control panel.
> downlod the beta drivers from ATI and use the correct installation instructions from there to install the control panel.
>
>
>
> (E-Mail Removed)
>
>
>
> "Dragen" <(E-Mail Removed)> wrote in message news:9DF9B9CF-10C7-459C-B6F4-(E-Mail Removed)...
> With my monitor (LG Studioworks 775E), I've always been able to run 1280x1024
> at 85 Hz, but after I installed Vista, it wont let me select 85 Hz.
> Only 60, 86 and 94 Hz.
> At 86 Hz, the monitor goes out of whack.
>
> I'm using an ATi Radeon 9800 Pro.
>
> How do I set 85 Hz? 60 Hz is killing my eyes, and I can set 85 Hz only with
> 1024x768, but I am not comfortable with that resolution

On Thu, 8 Jun 2006 13:20:02 -0700, Dragen
<(E-Mail Removed)> wrote:

>With my monitor (LG Studioworks 775E), I've always been able to run 1280x1024
>at 85 Hz, but after I installed Vista, it wont let me select 85 Hz.
>Only 60, 86 and 94 Hz.
>At 86 Hz, the monitor goes out of whack.
>
>I'm using an ATi Radeon 9800 Pro.
>
>How do I set 85 Hz? 60 Hz is killing my eyes, and I can set 85 Hz only with
>1024x768, but I am not comfortable with that resolution.

What do you mean by "goes out of whack?" On CRT monitors, changing
the vertical refresh rate often makes the image shift up, down, right,
or left, and change size, but you should be able to adjust it back to
full screen uning the monitor's controls. Have you tried that?

ok, back on winxp for now.

milleron:
the screen streches, like it goes extreme widescreen. and if i try to
manually adjust the settings on my monitor, the screen just looks weird.

mikey:
yes, i have installed the ati beta drivers, and the C-CP.
i've even tried using ATis override function, but it only resets to 60 Hz.

ok, back on winxp for now.

milleron:
the screen streches, like it goes extreme widescreen. and if i try to
manually adjust the settings on my monitor, the screen just looks weird.

mikey:
yes, i have installed the ati beta drivers, and the C-CP.
i've even tried using ATis override function, but it only resets to 60 Hz.