I have a strange problem with a new floppy drive I installed. It is a
Teac 3.5, 144MB and the cables are installed correctly. As a matter of
fact, the drive will read floppys, but when I try to format, or write
to a floppy I get a "disk write protected" error. It does this with
any brand of floppy with the "write protect" tab open or closed. Win
XP Device Mgr. tells me that the drive and controller are working
properly. Any one have any ideas?

<roys> wrote in message news:(E-Mail Removed)...
> I have a strange problem with a new floppy drive I installed. It is a
> Teac 3.5, 144MB and the cables are installed correctly. As a matter of
> fact, the drive will read floppys, but when I try to format, or write
> to a floppy I get a "disk write protected" error. It does this with
> any brand of floppy with the "write protect" tab open or closed. Win
> XP Device Mgr. tells me that the drive and controller are working
> properly. Any one have any ideas?

Sounds like a bad drive to me. -Dave

Thanks Dave,
I thought so to, just wanted some confirmation from someone smarter than I
am - Roy
"Dave C." <(E-Mail Removed)> wrote in message
news:2e6dnZnMM73s5bbdRVn-(E-Mail Removed)...
>
> <roys> wrote in message news:(E-Mail Removed)...
> > I have a strange problem with a new floppy drive I installed. It is a
> > Teac 3.5, 144MB and the cables are installed correctly. As a matter of
> > fact, the drive will read floppys, but when I try to format, or write
> > to a floppy I get a "disk write protected" error. It does this with
> > any brand of floppy with the "write protect" tab open or closed. Win
> > XP Device Mgr. tells me that the drive and controller are working
> > properly. Any one have any ideas?
>
> Sounds like a bad drive to me. -Dave
>
>

(E-Mail Removed) wrote in message news:<(E-Mail Removed)>...
> I have a strange problem with a new floppy drive I installed. It is a
> Teac 3.5, 144MB and the cables are installed correctly. As a matter of
> fact, the drive will read floppys, but when I try to format, or write
> to a floppy I get a "disk write protected" error. It does this with
> any brand of floppy with the "write protect" tab open or closed. Win
> XP Device Mgr. tells me that the drive and controller are working
> properly. Any one have any ideas?


Have you gone to the store and bought brand new PC formatted floppies?
Also the whole is suppost to be covered for writing. Make sure that
it click into place.

Jay

You have a bad drive. It's not correctly reading the write-protect tab on
the disc.

--
DaveW



<(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> I have a strange problem with a new floppy drive I installed. It is a
> Teac 3.5, 144MB and the cables are installed correctly. As a matter of
> fact, the drive will read floppys, but when I try to format, or write
> to a floppy I get a "disk write protected" error. It does this with
> any brand of floppy with the "write protect" tab open or closed. Win
> XP Device Mgr. tells me that the drive and controller are working
> properly. Any one have any ideas?
>

As I said, the drive was tried with a number of different floppys and no
matter where the tab was open or closed, the drive says "disk write
protected" I agree that the drive has to be bad and I will send it back.
Thanks for all the input - Roy
"DaveW" <(E-Mail Removed)> wrote in message
news:KuUWb.15923$yE5.72499@attbi_s54...
> You have a bad drive. It's not correctly reading the write-protect tab on
> the disc.
>
> --
> DaveW
>
>
>
> <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > I have a strange problem with a new floppy drive I installed. It is a
> > Teac 3.5, 144MB and the cables are installed correctly. As a matter of
> > fact, the drive will read floppys, but when I try to format, or write
> > to a floppy I get a "disk write protected" error. It does this with
> > any brand of floppy with the "write protect" tab open or closed. Win
> > XP Device Mgr. tells me that the drive and controller are working
> > properly. Any one have any ideas?
> >
>
>

do you have any software running that would stop you from changing a
boot record...

Roy Smith wrote:

> As I said, the drive was tried with a number of different floppys and no
> matter where the tab was open or closed, the drive says "disk write
> protected" I agree that the drive has to be bad and I will send it back.
> Thanks for all the input - Roy
> "DaveW" <(E-Mail Removed)> wrote in message
> news:KuUWb.15923$yE5.72499@attbi_s54...
>
>>You have a bad drive. It's not correctly reading the write-protect tab on
>>the disc.
>>
>>--
>>DaveW
>>
>>
>>
>><(E-Mail Removed)> wrote in message
>>news:(E-Mail Removed)...
>>
>>>I have a strange problem with a new floppy drive I installed. It is a
>>>Teac 3.5, 144MB and the cables are installed correctly. As a matter of
>>>fact, the drive will read floppys, but when I try to format, or write
>>>to a floppy I get a "disk write protected" error. It does this with
>>>any brand of floppy with the "write protect" tab open or closed. Win
>>>XP Device Mgr. tells me that the drive and controller are working
>>>properly. Any one have any ideas?
>>>
>>
>>
>
>
>

BIOS you have read /write turned off for the floppy


<(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
> I have a strange problem with a new floppy drive I installed. It is a
> Teac 3.5, 144MB and the cables are installed correctly. As a matter of
> fact, the drive will read floppys, but when I try to format, or write
> to a floppy I get a "disk write protected" error. It does this with
> any brand of floppy with the "write protect" tab open or closed. Win
> XP Device Mgr. tells me that the drive and controller are working
> properly. Any one have any ideas?
>

Dumb and dumber, that's me! JAD was right, it was turned off in the Bios. I
checked everything but the obvious, works fine now. Thanks JAD and everyone
else, can always depend on help (and a "wake-up call") here.
Roy
"JAD" <(E-Mail Removed)> wrote in message
news:GZZWb.2115$(E-Mail Removed)...
> BIOS you have read /write turned off for the floppy
>
>
> <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> > I have a strange problem with a new floppy drive I installed. It is a
> > Teac 3.5, 144MB and the cables are installed correctly. As a matter of
> > fact, the drive will read floppys, but when I try to format, or write
> > to a floppy I get a "disk write protected" error. It does this with
> > any brand of floppy with the "write protect" tab open or closed. Win
> > XP Device Mgr. tells me that the drive and controller are working
> > properly. Any one have any ideas?
> >
>
>

Been there done that,, ;^0 glad you got it...


"Roy Smith" <(E-Mail Removed)> wrote in message news:GQgXb.28$(E-Mail Removed)...
> Dumb and dumber, that's me! JAD was right, it was turned off in the Bios. I
> checked everything but the obvious, works fine now. Thanks JAD and everyone
> else, can always depend on help (and a "wake-up call") here.
> Roy
> "JAD" <(E-Mail Removed)> wrote in message
> news:GZZWb.2115$(E-Mail Removed)...
> > BIOS you have read /write turned off for the floppy
> >
> >
> > <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > > I have a strange problem with a new floppy drive I installed. It is a
> > > Teac 3.5, 144MB and the cables are installed correctly. As a matter of
> > > fact, the drive will read floppys, but when I try to format, or write
> > > to a floppy I get a "disk write protected" error. It does this with
> > > any brand of floppy with the "write protect" tab open or closed. Win
> > > XP Device Mgr. tells me that the drive and controller are working
> > > properly. Any one have any ideas?
> > >
> >
> >
>
>
>