I hope someone can help me with this...
I am having trouble copying files from one hard drive to another. I keep
getting the message that the drive I am trying to copy to is READ ONLY...I
have the 160 GB SATA Seagate drive installed as my primary hard drive, and a
second Ultra ATA 160 GB installed on IDE as slave to the optical drive.... i
notice i cannot directly copy files in explorer from one hard drive to the
other. The drives are marked "read only" in explorer and I cannot change that
setting. Well, I can change it but the second I hit ok, then go back to
properties, there it is again "read only." I have no trouble copying from
CD/DVD to either drive or from the internet to my harddrives. But, simply
cannot copy from one hard drive to another because it keeps it READ ONLY.

Thanks ahead of time for your help!

Al
______________________________________________

My system:
Mobo: Abit AA8XE

CPU: Intel Pentium 4 3.2 GHz, 800Mhz FSB, 1MB L1 cache, LGA775

PSU: XION 450W SuperNova

Video: NVIDIA GForce 6800 (Leadtek PX 6800 256M)

Memory: Crucial 1GB, 400, DDR2, two sticks

Drives: Seagate SATA 160GB hardrive, Maxtor Ultra/ATA 160GB harddrive set as
slave to optical drive on IDE channel, HP DVD burner (master on IDE channel)

Try HD as Master and Optical as Slave.

sebc03 wrote:

> I hope someone can help me with this...
> I am having trouble copying files from one hard drive to another. I keep
> getting the message that the drive I am trying to copy to is READ ONLY...I
> have the 160 GB SATA Seagate drive installed as my primary hard drive, and a
> second Ultra ATA 160 GB installed on IDE as slave to the optical drive.... i
> notice i cannot directly copy files in explorer from one hard drive to the
> other. The drives are marked "read only" in explorer and I cannot change that
> setting. Well, I can change it but the second I hit ok, then go back to
> properties, there it is again "read only." I have no trouble copying from
> CD/DVD to either drive or from the internet to my harddrives. But, simply
> cannot copy from one hard drive to another because it keeps it READ ONLY.
>
> Thanks ahead of time for your help!
>
> Al
> ______________________________________________
>
> My system:
> Mobo: Abit AA8XE
>
> CPU: Intel Pentium 4 3.2 GHz, 800Mhz FSB, 1MB L1 cache, LGA775
>
> PSU: XION 450W SuperNova
>
> Video: NVIDIA GForce 6800 (Leadtek PX 6800 256M)
>
> Memory: Crucial 1GB, 400, DDR2, two sticks
>
> Drives: Seagate SATA 160GB hardrive, Maxtor Ultra/ATA 160GB harddrive set as
> slave to optical drive on IDE channel, HP DVD burner (master on IDE channel)