I bought a new Vista machine to replace my oldest computer. The new machine
is wired to a wireless router and has a USB cable to the HP printer. It
prints fine using the built in driver in Vista, but the other 2
machines(both XP) on my wireless network can not "see" the printer to add it
as their default printer. This was working fine when the previous XP
machine was being used. I did turn on printer sharing, and the 2 XP
machines can share other files, etc. They just don't see the printer. Any
ideas would be much appreciated. Gateway told me it was a Vista problem and
Microsoft told me to call Gateway. Only wasted 3 hours on the phone. UGH!

Alan,

Thanks for your post. I'm sorry for the trouble you're experiencing. There
are some changes in Vista over XP around sharing and access for a more secure
system (by default). The below TechNet article explains these improvements,
and shows you how to change settings to allow for device access and file
sharing. Please review these and follow the steps and let us know if this
doesn't work for you:

http://www.microsoft.com/technet/net.../vista_fp.mspx

Thanks


"Alan Muster" wrote:

> I bought a new Vista machine to replace my oldest computer. The new machine
> is wired to a wireless router and has a USB cable to the HP printer. It
> prints fine using the built in driver in Vista, but the other 2
> machines(both XP) on my wireless network can not "see" the printer to add it
> as their default printer. This was working fine when the previous XP
> machine was being used. I did turn on printer sharing, and the 2 XP
> machines can share other files, etc. They just don't see the printer. Any
> ideas would be much appreciated. Gateway told me it was a Vista problem and
> Microsoft told me to call Gateway. Only wasted 3 hours on the phone. UGH!
>
>

Thanks for the help. Turns out it was the last step. The new Vista
computer had McAfee firewall preinstalled. When I turn it off, everything
worked again.
Alan
"Kim [MS]" <(E-Mail Removed)> wrote in message
news:303F5D6D-9BD7-4B3C-8FAD-(E-Mail Removed)...
> Alan,
>
> Thanks for your post. I'm sorry for the trouble you're experiencing.
> There
> are some changes in Vista over XP around sharing and access for a more
> secure
> system (by default). The below TechNet article explains these
> improvements,
> and shows you how to change settings to allow for device access and file
> sharing. Please review these and follow the steps and let us know if this
> doesn't work for you:
>
> http://www.microsoft.com/technet/net.../vista_fp.mspx
>
> Thanks
>
>
> "Alan Muster" wrote:
>
>> I bought a new Vista machine to replace my oldest computer. The new
>> machine
>> is wired to a wireless router and has a USB cable to the HP printer. It
>> prints fine using the built in driver in Vista, but the other 2
>> machines(both XP) on my wireless network can not "see" the printer to add
>> it
>> as their default printer. This was working fine when the previous XP
>> machine was being used. I did turn on printer sharing, and the 2 XP
>> machines can share other files, etc. They just don't see the printer.
>> Any
>> ideas would be much appreciated. Gateway told me it was a Vista problem
>> and
>> Microsoft told me to call Gateway. Only wasted 3 hours on the phone.
>> UGH!
>>
>>

Alan Muster,

That's good news. Firewalls should be at the top of that article.

Thanks for the feedback

"Alan Muster" wrote:

> Thanks for the help. Turns out it was the last step. The new Vista
> computer had McAfee firewall preinstalled. When I turn it off, everything
> worked again.
> Alan
> "Kim [MS]" <(E-Mail Removed)> wrote in message
> news:303F5D6D-9BD7-4B3C-8FAD-(E-Mail Removed)...
> > Alan,
> >
> > Thanks for your post. I'm sorry for the trouble you're experiencing.
> > There
> > are some changes in Vista over XP around sharing and access for a more
> > secure
> > system (by default). The below TechNet article explains these
> > improvements,
> > and shows you how to change settings to allow for device access and file
> > sharing. Please review these and follow the steps and let us know if this
> > doesn't work for you:
> >
> > http://www.microsoft.com/technet/net.../vista_fp.mspx
> >
> > Thanks
> >
> >
> > "Alan Muster" wrote:
> >
> >> I bought a new Vista machine to replace my oldest computer. The new
> >> machine
> >> is wired to a wireless router and has a USB cable to the HP printer. It
> >> prints fine using the built in driver in Vista, but the other 2
> >> machines(both XP) on my wireless network can not "see" the printer to add
> >> it
> >> as their default printer. This was working fine when the previous XP
> >> machine was being used. I did turn on printer sharing, and the 2 XP
> >> machines can share other files, etc. They just don't see the printer.
> >> Any
> >> ideas would be much appreciated. Gateway told me it was a Vista problem
> >> and
> >> Microsoft told me to call Gateway. Only wasted 3 hours on the phone.
> >> UGH!
> >>
> >>
>
>