I have found when doing a memory scan with MSA when I run
DiamondCS Port Explorer v 2.0 or TDS-3, I always get not
responding in the memory scan from MSA and the CPU
performance shoots up to 80 to 90 percent.

Must be that running TSD-3 or Port Explorer when MSA is
trying to scan in the memory is taking up too much memory
when trying to scan and MSA stops responding. I can close
Explorer v 2.0 and TDS-3 and the memory scan seem to work
fine. I have no way to verify that but it's very consistant.

Regards,
Hardhead

Thanks - can you post URLs to find these two apps, so that Microsoft can
reproduce this if they need to?
--
FAQ for Microsoft Antispyware:
http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm

"Hardhead" <(E-Mail Removed)> wrote in message
news:82ad01c52821$17adb8e0$(E-Mail Removed)...
>I have found when doing a memory scan with MSA when I run
> DiamondCS Port Explorer v 2.0 or TDS-3, I always get not
> responding in the memory scan from MSA and the CPU
> performance shoots up to 80 to 90 percent.
>
> Must be that running TSD-3 or Port Explorer when MSA is
> trying to scan in the memory is taking up too much memory
> when trying to scan and MSA stops responding. I can close
> Explorer v 2.0 and TDS-3 and the memory scan seem to work
> fine. I have no way to verify that but it's very consistant.
>
> Regards,
> Hardhead

Hello Bill Sanderson,
Thanks for your reply.

You will find PortExplorer v 2.0 @
http://www.diamondcs.com.au/portexplorer/
and TDS-3 @ http://tds.diamondcs.com.au/

Regard,
Hardhead
>-----Original Message-----
>Thanks - can you post URLs to find these two apps, so that
Microsoft can
>reproduce this if they need to?
>--
>FAQ for Microsoft Antispyware:
>http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm
>
>"Hardhead" <(E-Mail Removed)> wrote in
message
>news:82ad01c52821$17adb8e0$(E-Mail Removed)...
>>I have found when doing a memory scan with MSA when I run
>> DiamondCS Port Explorer v 2.0 or TDS-3, I always get not
>> responding in the memory scan from MSA and the CPU
>> performance shoots up to 80 to 90 percent.
>>
>> Must be that running TSD-3 or Port Explorer when MSA is
>> trying to scan in the memory is taking up too much memory
>> when trying to scan and MSA stops responding. I can close
>> Explorer v 2.0 and TDS-3 and the memory scan seem to work
>> fine. I have no way to verify that but it's very consistant.
>>
>> Regards,
>> Hardhead
>
>
>.
>

Oops.........

Sorry I forgot to add that I'm running registered versions
of both PortExplorer v 2.0 and TDS-3. There should be no
problem using the free evaluation version of PortExplorer v
2.0, but the TDS-3 free evaluation version is not a full
blown app and will not have the Execution Protection
installed.

Regards,
Hardhead
>-----Original Message-----
>Hello Bill Sanderson,
>Thanks for your reply.
>
>You will find PortExplorer v 2.0 @
>http://www.diamondcs.com.au/portexplorer/
>and TDS-3 @ http://tds.diamondcs.com.au/
>
>Regard,
>Hardhead
>>-----Original Message-----
>>Thanks - can you post URLs to find these two apps, so that
>Microsoft can
>>reproduce this if they need to?
>>--
>>FAQ for Microsoft Antispyware:
>>http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm
>>
>>"Hardhead" <(E-Mail Removed)> wrote in
>message
>>news:82ad01c52821$17adb8e0$(E-Mail Removed)...
>>>I have found when doing a memory scan with MSA when I run
>>> DiamondCS Port Explorer v 2.0 or TDS-3, I always get not
>>> responding in the memory scan from MSA and the CPU
>>> performance shoots up to 80 to 90 percent.
>>>
>>> Must be that running TSD-3 or Port Explorer when MSA is
>>> trying to scan in the memory is taking up too much memory
>>> when trying to scan and MSA stops responding. I can close
>>> Explorer v 2.0 and TDS-3 and the memory scan seem to work
>>> fine. I have no way to verify that but it's very
consistant.
>>>
>>> Regards,
>>> Hardhead
>>
>>
>>.
>>
>.
>

Thanks!

--
FAQ for Microsoft Antispyware:
http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm

<(E-Mail Removed)> wrote in message
news:7d0301c52853$da9101a0$(E-Mail Removed)...
> Hello Bill Sanderson,
> Thanks for your reply.
>
> You will find PortExplorer v 2.0 @
> http://www.diamondcs.com.au/portexplorer/
> and TDS-3 @ http://tds.diamondcs.com.au/
>
> Regard,
> Hardhead
>>-----Original Message-----
>>Thanks - can you post URLs to find these two apps, so that
> Microsoft can
>>reproduce this if they need to?
>>--
>>FAQ for Microsoft Antispyware:
>>http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm
>>
>>"Hardhead" <(E-Mail Removed)> wrote in
> message
>>news:82ad01c52821$17adb8e0$(E-Mail Removed)...
>>>I have found when doing a memory scan with MSA when I run
>>> DiamondCS Port Explorer v 2.0 or TDS-3, I always get not
>>> responding in the memory scan from MSA and the CPU
>>> performance shoots up to 80 to 90 percent.
>>>
>>> Must be that running TSD-3 or Port Explorer when MSA is
>>> trying to scan in the memory is taking up too much memory
>>> when trying to scan and MSA stops responding. I can close
>>> Explorer v 2.0 and TDS-3 and the memory scan seem to work
>>> fine. I have no way to verify that but it's very consistant.
>>>
>>> Regards,
>>> Hardhead
>>
>>
>>.
>>

Thanks for the clarification.
--
FAQ for Microsoft Antispyware:
http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm

"Hardhead" <(E-Mail Removed)> wrote in message
news:7d1801c52856$4253e4e0$(E-Mail Removed)...
> Oops.........
>
> Sorry I forgot to add that I'm running registered versions
> of both PortExplorer v 2.0 and TDS-3. There should be no
> problem using the free evaluation version of PortExplorer v
> 2.0, but the TDS-3 free evaluation version is not a full
> blown app and will not have the Execution Protection
> installed.
>
> Regards,
> Hardhead
>>-----Original Message-----
>>Hello Bill Sanderson,
>>Thanks for your reply.
>>
>>You will find PortExplorer v 2.0 @
>>http://www.diamondcs.com.au/portexplorer/
>>and TDS-3 @ http://tds.diamondcs.com.au/
>>
>>Regard,
>>Hardhead
>>>-----Original Message-----
>>>Thanks - can you post URLs to find these two apps, so that
>>Microsoft can
>>>reproduce this if they need to?
>>>--
>>>FAQ for Microsoft Antispyware:
>>>http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm
>>>
>>>"Hardhead" <(E-Mail Removed)> wrote in
>>message
>>>news:82ad01c52821$17adb8e0$(E-Mail Removed)...
>>>>I have found when doing a memory scan with MSA when I run
>>>> DiamondCS Port Explorer v 2.0 or TDS-3, I always get not
>>>> responding in the memory scan from MSA and the CPU
>>>> performance shoots up to 80 to 90 percent.
>>>>
>>>> Must be that running TSD-3 or Port Explorer when MSA is
>>>> trying to scan in the memory is taking up too much memory
>>>> when trying to scan and MSA stops responding. I can close
>>>> Explorer v 2.0 and TDS-3 and the memory scan seem to work
>>>> fine. I have no way to verify that but it's very
> consistant.
>>>>
>>>> Regards,
>>>> Hardhead
>>>
>>>
>>>.
>>>
>>.
>>

Have you tried a reinstall of either PortExplorer or MSAS?

I just loaded the PortExplorer2.0 Eval(nice program!) and I am running MSAS
scan now and I am not having a problem. My machine is Windows XP SP2 with
P4 2.8 and 512mb ram.

JohnF.



"Hardhead" <(E-Mail Removed)> wrote in message
news:7d1801c52856$4253e4e0$(E-Mail Removed)...
> Oops.........
>
> Sorry I forgot to add that I'm running registered versions
> of both PortExplorer v 2.0 and TDS-3. There should be no
> problem using the free evaluation version of PortExplorer v
> 2.0, but the TDS-3 free evaluation version is not a full
> blown app and will not have the Execution Protection
> installed.
>
> Regards,
> Hardhead
>>-----Original Message-----
>>Hello Bill Sanderson,
>>Thanks for your reply.
>>
>>You will find PortExplorer v 2.0 @
>>http://www.diamondcs.com.au/portexplorer/
>>and TDS-3 @ http://tds.diamondcs.com.au/
>>
>>Regard,
>>Hardhead
>>>-----Original Message-----
>>>Thanks - can you post URLs to find these two apps, so that
>>Microsoft can
>>>reproduce this if they need to?
>>>--
>>>FAQ for Microsoft Antispyware:
>>>http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm
>>>
>>>"Hardhead" <(E-Mail Removed)> wrote in
>>message
>>>news:82ad01c52821$17adb8e0$(E-Mail Removed)...
>>>>I have found when doing a memory scan with MSA when I run
>>>> DiamondCS Port Explorer v 2.0 or TDS-3, I always get not
>>>> responding in the memory scan from MSA and the CPU
>>>> performance shoots up to 80 to 90 percent.
>>>>
>>>> Must be that running TSD-3 or Port Explorer when MSA is
>>>> trying to scan in the memory is taking up too much memory
>>>> when trying to scan and MSA stops responding. I can close
>>>> Explorer v 2.0 and TDS-3 and the memory scan seem to work
>>>> fine. I have no way to verify that but it's very
> consistant.
>>>>
>>>> Regards,
>>>> Hardhead
>>>
>>>
>>>.
>>>
>>.
>>