PC Review


Reply
Thread Tools Rate Thread

PCI card dimension

 
 
Philip
Guest
Posts: n/a
 
      17th Jan 2007
I have what seems to me to be a very basic question, but over an hour of
Google searching has failed to find any reasonable answer.

The question is simply this: What are the actual dimensions of standard PCI
cards? And of so-called "half-height" cards?

Although Wikipedia gives the dimensions of the official standard as height
107 mm (4.2 inches) and a depth of 312 mm (12.283 inches), looking at a
recent PCI card (it's a Sitecom WiFi card as it happens) and at the PCI
slots on the motherboard, I can see that although it is about the right
height, it is much shorter than this - about 120mm. This seems to be what
www.interfacebus.com call a "short" PCI card, but it's shorter than that -
they say that the "short" card is 174mm long. My motherboard has 3 PCI slots
and they all definitely won't take a card anything like as long as 312mm
(which is over a foot).

I have just bought a new PC which only takes "half-height" PCI cards
(although the so-called "specification" doesn't actually tell you this). I
am pretty sure that my standard-height, short PCI card won't fit. But apart
from the back-plate, the actual card itself if much lower than the full
height - about 67mm including edge slots.

Wikipedia just says that ""Half-height" and "half-length" cards and slots
are common, and presumably have dimensions half those of the full-size
cards". I think this presumption is wrong, I think that "half-height" is
just a way of saying "lower than full-height", and since half-height or
"low-profile" cards are available I guess this must be some sort of
standard. But, my question is, what sort of standard is it? What are the
standard dimensions of a "half-height" or "low-profile" PCI card, and will
my card fit if I remove the back plate?

An obvious way to find out is to try it and see. But surely somewhere there
must be a defined standard? Or is this too much to hope?

-- Philip


 
Reply With Quote
 
 
 
 
Gerard Bok
Guest
Posts: n/a
 
      17th Jan 2007
On Wed, 17 Jan 2007 11:46:36 -0000, "Philip"
<(E-Mail Removed)> wrote:

>I have what seems to me to be a very basic question, but over an hour of
>Google searching has failed to find any reasonable answer.
>
>The question is simply this: What are the actual dimensions of standard PCI
>cards? And of so-called "half-height" cards?
>
>Although Wikipedia gives the dimensions of the official standard as height
>107 mm (4.2 inches) and a depth of 312 mm (12.283 inches), looking at a
>recent PCI card (it's a Sitecom WiFi card as it happens) and at the PCI
>slots on the motherboard, I can see that although it is about the right
>height, it is much shorter than this - about 120mm.


>I have just bought a new PC which only takes "half-height" PCI cards
>(although the so-called "specification" doesn't actually tell you this). I
>am pretty sure that my standard-height, short PCI card won't fit. But apart
>from the back-plate, the actual card itself if much lower than the full
>height - about 67mm including edge slots.


http://en.wikipedia.org/wiki/Mini_PCI ?

--
Kind regards,
Gerard Bok
 
Reply With Quote
 
 
 
 
kony
Guest
Posts: n/a
 
      17th Jan 2007
On Wed, 17 Jan 2007 11:46:36 -0000, "Philip"
<(E-Mail Removed)> wrote:

<snip>

>I have just bought a new PC which only takes "half-height" PCI cards
>(although the so-called "specification" doesn't actually tell you this). I
>am pretty sure that my standard-height, short PCI card won't fit. But apart
>from the back-plate, the actual card itself if much lower than the full
>height - about 67mm including edge slots.



> But, my question is, what sort of standard is it? What are the
>standard dimensions of a "half-height" or "low-profile" PCI card, and will
>my card fit if I remove the back plate?



When buying a ready-made system, one cannot presume the
system adheres to standards rather than somewhat
proprietary. Even so, there is still the reasonable
presumption it has to adhere to some of them just to make
(their) sourcing of parts cost effective, instead of having
to reinvent everything at significantly higher cost in
design and manufacturing (parts the OEM buys then uses).

The length can vary quite a bit depending on how the board
is laid out, situated in the case, but a useful working
number is about 120mm length of PCB from the forward edge of
the PCI slot, to rearward edge that screws to the mounting
bracket. In other words there can't be anything blocking
the forward edge of the card when it doesn't extend forward
past the slot itself.

The height could be exceeded a few millimeters depending on
the design of the case, but another working number (I don't
recall if this is a spec # or not) for total PCB height
(including card edge) would be 65mm.

As to whether your card will fit if you remove the
backplate, how will you then mount it? It's easier to find
cards 65mm or less than to also find them with the back
mounting bracket, though I suppose you can machine down that
bracket to the height you need, or fabricate one though
often cards with so little on them that they'll fit on a
half height card, aren't very expensive if you had to find
an alternative with the shorter bracket included.

Some cards are shorter merely to save on cost of the PCB
material used, not necessarily targeted to fit a half height
standard, so you may find cards not much taller than 65mm
but still too tall to fit (like Promise Ultra/FastTrack 66
(not that you'd want to use one today but it's just an
example, a few years ago I ended up replacing the right
angle pin headers on a FastTrack66 with straight 180' header
and sawing off about 1 cm from a card so it would fit in a
low profile case... so it is possible to /make/ a card fit
sometimes, but more often the designer routed something up
nearer the top edge that can't be cut off)).
 
Reply With Quote
 
Paul
Guest
Posts: n/a
 
      17th Jan 2007
Philip wrote:
> I have what seems to me to be a very basic question, but over an hour of
> Google searching has failed to find any reasonable answer.
>
> The question is simply this: What are the actual dimensions of standard PCI
> cards? And of so-called "half-height" cards?
>
> Although Wikipedia gives the dimensions of the official standard as height
> 107 mm (4.2 inches) and a depth of 312 mm (12.283 inches), looking at a
> recent PCI card (it's a Sitecom WiFi card as it happens) and at the PCI
> slots on the motherboard, I can see that although it is about the right
> height, it is much shorter than this - about 120mm. This seems to be what
> www.interfacebus.com call a "short" PCI card, but it's shorter than that -
> they say that the "short" card is 174mm long. My motherboard has 3 PCI slots
> and they all definitely won't take a card anything like as long as 312mm
> (which is over a foot).
>
> I have just bought a new PC which only takes "half-height" PCI cards
> (although the so-called "specification" doesn't actually tell you this). I
> am pretty sure that my standard-height, short PCI card won't fit. But apart
> from the back-plate, the actual card itself if much lower than the full
> height - about 67mm including edge slots.
>
> Wikipedia just says that ""Half-height" and "half-length" cards and slots
> are common, and presumably have dimensions half those of the full-size
> cards". I think this presumption is wrong, I think that "half-height" is
> just a way of saying "lower than full-height", and since half-height or
> "low-profile" cards are available I guess this must be some sort of
> standard. But, my question is, what sort of standard is it? What are the
> standard dimensions of a "half-height" or "low-profile" PCI card, and will
> my card fit if I remove the back plate?
>
> An obvious way to find out is to try it and see. But surely somewhere there
> must be a defined standard? Or is this too much to hope?
>
> -- Philip
>
>


http://www.pcisig.com/news_room/faqs/#low_profile_pci

*******
Low-Profile PCI

Q: What is Low-Profile PCI?

A: Low-Profile PCI is a new PCI card standard for space-constrained system
designs. The new form factors maintain the same electricals, protocols,
PC signals and software drivers as standard PCI v2.2 expansion cards.
They are also mechanically similar; however, Low-Profile PCI is an
additional form factor that defines a shorter raw card and new mounting
bracket for card retention. The Low-Profile PCI definition is an engineering
change notice (ECN) to the conventional PCI specification, Revision 2.2. It will
include a new section in the mechanical chapter to define the Low-Profile PCI raw
card and mounting bracket.

Q: What is the difference between Low-Profile PCI and Mini PCI?

A: Low-Profile PCI and Mini PCI are two different initiatives that address different
market needs. Low-Profile PCI will allow greater flexibility in desktop and server
designs, and in some cases eliminate the need for riser cards. Mini PCI was
developed specifically for integrated communications peripherals such as modems
and network interface cards (NICs) in a mobile environment. Mini PCI provides
flexibility for OEM/system integrators and is not intended for end-user installation.

Q: If Mini PCI is smaller than Low-Profile PCI, then why not use Mini PCI rather than
define a new standard?

A: The smaller card dimensions for Mini PCI require more compact and higher density
components than Low-Profile PCI. Mini PCI is a standard for integrated peripherals
that targets small form-factor products such as notebook PCs, docking stations and
printers. In addition to the small size, Mini PCI requires a new interface to the
board and system. Low-Profile PCI leverages existing adapter-card designs. Many
cards are already short in height to save cost and optimize PCB panel sizes. In many
cases, the bracket drives the height of the card assembly and therefore, the
height of the system design.

Q: How tall will the Low-Profile cards be compared to standard PCI adapter cards?

A: Low-Profile PCI should fit into systems as low as 3.350" [85 mm] without the
use of riser cards.

Q: Are there various card lengths defined for Low-Profile PCI similar to short and
long cards for standard PCI?

A: Low-Profile PCI has two card lengths defined for 32-bit cards, MD1 and MD2. The
purpose of MD1 and MD2 is to establish size limits for system designers. MD1 is
the shortest card offering and poses the greatest challenge to adapter-card vendors.
However, MD1 cards also allow for the smallest system design. Systems which are
designed to support both MD1 and MD2 card lengths will have the greatest flexibility
in supporting all Low-Profile PCI compliant cards.

Q: Will Low-Profile PCI fit into current brackets?

A: Low-Profile PCI will be backward compatible for existing brackets; however, the
ECN will also define a new bracket that will not be compatible with standard PCI
cards.

Q: Is Low-Profile PCI going to support 5.0 volt signaling?

A: To reflect the PCI-SIG's market recommendation of moving to 3.3 volt signaling
as quickly as possible, Low-Profile PCI will only support 3.3 volt signaling.

Q: What is the status of Low-Profile PCI?

A: The Low-Profile PCI ECN was officially approved and released by the steering
committee on February 11, 2000. The Low-Profile ECN, along with all other ECNs
to the v2.2 PCI bus specification, are currently available at the PCI-SIG Web
site, www.pcisig.com, for free download to the industry.

Q: When will Low-Profile PCI products be available?

A: Compliant Low-Profile PCI products are currently on the market. Q-Logic is
presently producing Low-Profile PCI products. Accton Technologies is also
currently producing two products that support Low-Profile PCI, the EN1207D
series 10/100 Fast Ethernet Adapter and the EN1207F series 10/100 Fast Ethernet Adapter.
*******

The low profile ECN is here. I expect that at least some of the cards
you'll find, won't be entirely compliant with the intent of specs like
this. For example, the cards might not be 3.3V only, in the interest
of the company making them being able to sell more of them.

http://www.pcisig.com/specifications...i/lowp_ecn.pdf

The MD1 is 4.8" long and MD2 is around 6.6". The 4.8" is probably selected to just
meet the end of the motherboard connector.

For more info about PCI, use your favorite search engine and look for "pci22.pdf".
It is a 3,837,952 byte file. Should it be available for download ? No :-)

Paul
 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
PCI Express card touching PCI slot card -- Shorting out darklight Computer Hardware 7 31st May 2007 06:08 PM
Pci-e, pci-x, or pci Low Profile E-sata card out there? markm75 Storage Devices 10 19th May 2007 01:40 PM
Unseen TV Tuner PCI Card on Dell Dimension PC fooltergeist@yahoo.com Video Cards 6 28th Nov 2005 10:30 PM
Fastest way to copy from a one dimension byte array to two dimension int array johannblake@yahoo.com Microsoft C# .NET 5 14th Jun 2005 07:45 PM
Array transfer - 1 dimension v. 2 dimension JWolf Microsoft Excel Programming 2 29th Jun 2004 01:02 AM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 07:53 AM.