I have an older Supermicro P6SBU motherboard with an onboard AIC-7890
Ultra II SCSI controller. Well the system crashed and when I
reinstalled NT4 sp6 I noticed that I didn't have the SCSI drivers. I
have a manual that came with the system for Adaptec EZ-SCSI/Adaptec 7800
Family Manager set v3.x, and the motherboard manual says that the SCSI
controller functions with Adaptec RAIDport III (ARO-1130U2). So I went
to Adaptec's site and I see three sets of drivers for the 7800 and I
think I know
which set I should install, but is this just a driver set or will I need
to install additional
softrware to set up RAID 0? If so is that the Adaptec RAIDport III
ARO-1130U2
that the manual is referring to? I can't seem to find the literature on
Adaptec's site,
probably due to the fact that this is so old.
This is for a video editing system with striped video drives at 64 bits
per cluster.
|
Similar Threads
