I have a nForce4 GA-K8NF-9 motherboard with a built in Realtek audio.

The trouble is it worked fine with MCE 2005, but when I moved to Vista the
SPDIF is no longer functional. I have audio, but only 2 channel through the
regular audio jack. I have looked all the settings in the Gigabyte UI that
Vista installed, and the Speaker control panel, but nothing allows me to turn
on the SPDIF jack.

I went to the Realtek site to get new drivers, but Vista didn't want to
install them because it said I already had current audio drivers.

Any help?

Do you have the latest nForce drivers from the www.nvidia.com website?
--
Cari (MS-MVP)
Windows Technologies - Printing & Imaging
http://www.coribright.com/windows

"NerdBrick" <(E-Mail Removed)> wrote in message
news:F2F45065-E097-434C-9BE9-(E-Mail Removed)...
>I have a nForce4 GA-K8NF-9 motherboard with a built in Realtek audio.
>
> The trouble is it worked fine with MCE 2005, but when I moved to Vista the
> SPDIF is no longer functional. I have audio, but only 2 channel through
> the
> regular audio jack. I have looked all the settings in the Gigabyte UI that
> Vista installed, and the Speaker control panel, but nothing allows me to
> turn
> on the SPDIF jack.
>
> I went to the Realtek site to get new drivers, but Vista didn't want to
> install them because it said I already had current audio drivers.
>
> Any help?

I just got it to work by installing the latest RealTek drivers.

Now I'm trying to figure out why my external USB HD is no longer being
detected after getting the S/PDIF working.

Arg!


"Cari (MS-MVP)" wrote:

> Do you have the latest nForce drivers from the www.nvidia.com website?
> --
> Cari (MS-MVP)
> Windows Technologies - Printing & Imaging
> http://www.coribright.com/windows
>
> "NerdBrick" <(E-Mail Removed)> wrote in message
> news:F2F45065-E097-434C-9BE9-(E-Mail Removed)...
> >I have a nForce4 GA-K8NF-9 motherboard with a built in Realtek audio.
> >
> > The trouble is it worked fine with MCE 2005, but when I moved to Vista the
> > SPDIF is no longer functional. I have audio, but only 2 channel through
> > the
> > regular audio jack. I have looked all the settings in the Gigabyte UI that
> > Vista installed, and the Speaker control panel, but nothing allows me to
> > turn
> > on the SPDIF jack.
> >
> > I went to the Realtek site to get new drivers, but Vista didn't want to
> > install them because it said I already had current audio drivers.
> >
> > Any help?
>
>

Thank you.

I think many of my problems were trying to run Vista64, so I moved back to
Vista32. The most recet RelTek driver got my SPDIF working, and I see I can
have regular audio out or SDIF out; however, you can't have both active. When
I was running XP Media Center I was able to have both active so I can rout my
audio out on the back panel to different devices in my rack. Now I have to
make as choice which device I want to use.

Is this a bug or a feature that you can only choose one type of output?

"ssuper2k" wrote:

>
> I HAVE SENT THIS EMAIL TO REALTEK with NO LUCK yet:
> > Hello, I'm writing to all of you because I don't know exactly who to
> > contact...
> >
> > Firstly, I should tell you that I have an Asus MoBo with a realtek
> > sound chip that includes both s/pdif (s) coaxial+optical outputs...
> >
> > I've always connected my external amplifier throught the optical to get
> > pure digital sound...
> >
> > With Windows XP, it works flawlesly, once I select S/Pdif output on the
> > correcponding application.. my amplifier then detects either DTS/Dolby
> > or whatever...
> >
> > The problem is with Windows Vista(32b), I am not able to get it work
> > properly, I've tried it a lot of times, several versions of drivers,
> > with same results:
> > I get only Stereo S/Pdif output..
> >
> > The most important clue for me is that PowerDVD 7.3 does NOT detect my
> > S/Pdif output (under XP it does)
> >
> > I've selected my speakers as SPDIF, and 5.1... (the latest driver adds
> > a new digital output)and the test does OK througt DTS/Dolby5.1 test,
> > using all 6 speakers...
> >
> > But when I test usung the realtek application it only uses 2
> > speakers...
> >
> > I use the computer to play digital media (as MKV videos) with digital
> > audio tracks, usualy configuring AC3 filter to use SPDIF as
> > well..working fine on XP...playing it with any kind of media player, as
> > Windows Media player or VLC or any other..
> >
> > So I'm pretty sure I'm doing right but still not able to get 5.1 soung
> > through any media player under Windows Vista..
> >
> > I just would like to know if I am wasting my time, or else is/will be
> > it posible under Vista...
> >
> > By the way, if it were relevant, my mobo is A8V Deluxe, CPU 4600+, and
> > 2GB ram, so It runs Vista pretty fast..
> >
> > I hope I can get an answer soon or else I'm going crazy..
> >
> >
> > Thanks in advance.
> >
> >
> > Regards, ssuper2k.
> >
>
>
> --
> ssuper2k
> ------------------------------------------------------------------------
> ssuper2k's Profile: http://forums.techarena.in/member.php?userid=24159
> View this thread: http://forums.techarena.in/showthread.php?t=698473
>
> http://forums.techarena.in
>
>