Installed M848A v2.1 board +2400cpu and it has been running stable for 2
days no bsod/freezing i downloaded latest MBM v5.3.5.0 and used the config
wizard.

Once mbm was installed and setup the readings for almost all voltages and
temps are totally crazy (even after i manually checked mbm website for
specific temp sensors/diodes for the m848a board).

The only temp i can get accurately is Sis950/ITE8705F-1 Diode which is
always same reading as the: BIOS-Hardware Monitor Page-CPU Temperature so
the cpu temp sensor (Sis950/ITE8705F-1 Diode) is correct? And also the CPU
Fan which has identical reading in BIOS-Hardware Monitor Page-CPU Fan Speed.

So the only two accurate readings MBM gives me are the CPU temp and Fan
speed which are same as Bios readings!

Does this mean board is faulty or is MBM not really that accurate?

Found answer to crazy volts/temp readings on M848A with MBM -


http://tinyurl.com/2meas

Topic: 848ALU Temperatures and Voltages ?


Cheepoman "I'm afraid none of these programs will be of much help... because
of missing hardware in the mobo. You'll get random voltage readings at best"

RED321 "Cheepoman is of course right, I have found that the CPu temp/Vcore
and Fan RPM are readable, everything else is random noise."



So i will just ignore MBM/SpeedFan prog volt/temp readings and check
BIOS-System Hardware Monitor for board readings.