I have created a template and unlocked one section of it where I hope the
user will insert a picture of MS Project. However whenever a picture is
inserted into the section, it shows up as only a sliver of the original, and
can not be adjusted. In other words if the snapshot is 4 inches tall the
inserted version shows up as only an 1/8 inch tall in the unprotected
section.

I have left plenty of room in the unprotected part of the DOT. Any ideas
what could be wrong?

Thanks

Hi Striker,

> I have created a template and unlocked one section of it where I hope the
> user will insert a picture of MS Project. However whenever a picture is
> inserted into the section, it shows up as only a sliver of the original, and
> can not be adjusted. In other words if the snapshot is 4 inches tall the
> inserted version shows up as only an 1/8 inch tall in the unprotected
> section.
>
> I have left plenty of room in the unprotected part of the DOT. Any ideas
> what could be wrong?
>
You don't mention which dimension the "sliver" is coming from (top, side...).
But you could check the line spacing setting for the unprotected paragraph in
this section (Format/Paragraph). If it's set to "Exact" that would explain the
top or bottom getting cut off.

Cindy Meister
INTER-Solutions, Switzerland
http://homepage.swissonline.ch/cindymeister (last update Jun 17 2005)
http://www.word.mvps.org

This reply is posted in the Newsgroup; please post any follow question or reply
in the newsgroup and not by e-mail :-)

You have inserted the picture into a paragraph with Exactly line spacing or
into a table row with Exact row height.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Striker" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> I have created a template and unlocked one section of it where I hope the
> user will insert a picture of MS Project. However whenever a picture is
> inserted into the section, it shows up as only a sliver of the original,
and
> can not be adjusted. In other words if the snapshot is 4 inches tall the
> inserted version shows up as only an 1/8 inch tall in the unprotected
> section.
>
> I have left plenty of room in the unprotected part of the DOT. Any ideas
> what could be wrong?
>
> Thanks
>
>

Thank You, I'll take a look at that, and it is the Height that is the
problem, not the width


"Cindy M." <C.Meister-(E-Mail Removed)> wrote in message
news:VA.000002d1.015a8569@speedy...
> Hi Striker,
>
>> I have created a template and unlocked one section of it where I hope the
>> user will insert a picture of MS Project. However whenever a picture is
>> inserted into the section, it shows up as only a sliver of the original,
>> and
>> can not be adjusted. In other words if the snapshot is 4 inches tall the
>> inserted version shows up as only an 1/8 inch tall in the unprotected
>> section.
>>
>> I have left plenty of room in the unprotected part of the DOT. Any ideas
>> what could be wrong?
>>
> You don't mention which dimension the "sliver" is coming from (top,
> side...).
> But you could check the line spacing setting for the unprotected paragraph
> in
> this section (Format/Paragraph). If it's set to "Exact" that would explain
> the
> top or bottom getting cut off.
>
> Cindy Meister
> INTER-Solutions, Switzerland
> http://homepage.swissonline.ch/cindymeister (last update Jun 17 2005)
> http://www.word.mvps.org
>
> This reply is posted in the Newsgroup; please post any follow question or
> reply
> in the newsgroup and not by e-mail :-)
>