Hi,

I use a target definition that already installed on the
platform but now with some minor modifications (fonts and
application comp. support tools added) I can't install
anymore.
FBA hangs during the installation of the network. When
rebooting and checking the FBALog.txt I can't see any
reason.
Can anybody help me?

Thanks, Stefan

Compare the TD Build logs for the two configurations that work and fail. The
logs are located in the My Documents folder of the machine you built the
runtimes with.

You can diff the two logs, this may point you in the right direction as to
what's wrong.

Andy

--

This posting is provided "AS IS" with no warranties, and confers no rights.
==========================================================


"Stefan Wicki" <(E-Mail Removed)> wrote in message
news:076901c33ccb$9aee6c10$(E-Mail Removed)...
> Hi,
>
> I use a target definition that already installed on the
> platform but now with some minor modifications (fonts and
> application comp. support tools added) I can't install
> anymore.
> FBA hangs during the installation of the network. When
> rebooting and checking the FBALog.txt I can't see any
> reason.
> Can anybody help me?
>
> Thanks, Stefan

Hi

Do you checked the platformsettings?
Target Device Settings:
- Pathes
- Boot Partition


Wenn's nicht hilf, einfach mal am Montag anrufen: 079 444 74 19
:-)

--

Martin Grossen

AVNET EMG Silica
FM/FAM Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

"Stefan Wicki" <(E-Mail Removed)> schrieb im Newsbeitrag
news:076901c33ccb$9aee6c10$(E-Mail Removed)...
> Hi,
>
> I use a target definition that already installed on the
> platform but now with some minor modifications (fonts and
> application comp. support tools added) I can't install
> anymore.
> FBA hangs during the installation of the network. When
> rebooting and checking the FBALog.txt I can't see any
> reason.
> Can anybody help me?
>
> Thanks, Stefan

I got the system working by adding the user
name 'Administrator' in the winlogon component (I selected
the friendly logon). I do not know whether this was really
the point or if there is some other problematic effect.

Thanks anyway for all the help.

>-----Original Message-----
>Hi,
>
>I use a target definition that already installed on the
>platform but now with some minor modifications (fonts and
>application comp. support tools added) I can't install
>anymore.
>FBA hangs during the installation of the network. When
>rebooting and checking the FBALog.txt I can't see any
>reason.
>Can anybody help me?
>
>Thanks, Stefan
>.
>