My host moved our web site to a newer server after having problems with
publishing to the old one. We are still experiencing the same issues, as
follows;

At the beginning of Processing Web Updates a window pops up stating "The
server sent a response which FP could not parse. If you are trying to
connect to FP server, check with the server's administrator to make sure the
FP server extensions are installed properly". We checked, they are!

The next time, after the Processing Web Updates window, we received a pop up
window to re-enter our user name and password, but every time we insert it
and hit the ok button (or Enter on keyboard) the same window pops back up
again. This is strange since we can load our web from the server, so our ID
and PW works. I also tried to upload one of our Sub Webs and it will not go
in. I used Corel site manager to upload the Sub Web, but when I tried to go
to the page on the web I received a IE browser window that said I was not
authorized to view the page. Does Microsoft ever make anything that JUST
WORKS?

Dan

If this a large site or a site with a few large files?

What kind of internet connection do you have?

Since you are doing a complete republish, it might be best to open the live
site directly in FP, and make sure under Tools | Web Settings | Advanced
that view hidden directories is enabled, then delete all old web content,
with the exception of the _private folder and images folder, just delete any
content within these two folders, then run Tools | Recalculate Hyperlinks.

Then open you local copy and select Publish all pages. If you have subwebs,
publish then individually after publishing the root web.

--

==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)
http://www.ycoln-resources.com
FrontPage Resources, Forums, WebCircle,
MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

"Dan" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> Hi Thomas,
>
> Yes Chapel Communications runs the FP Server Extensions, when they
migrated
> the web it was working just fine. It was now that I am trying to publish
our
> new Web changes, which is a complete re-vamp, so I am having the same
> problems again.
>
> "Thomas A. Rowe" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > If the server has the FP extensions...
> >
> > When the site was moved, was it published via FP's http mode?
> >
> > Run a check on the FP extensions or have them re-installed and then do
not
> > use any other method outside of FP to publish content.
> >
> > If the server doesn't have the FP extensions, then you can use any FTP
> > application, as FP can not connect to all FTP servers.
> >
> > --
> >
> > ==============================================
> > Thomas A. Rowe (Microsoft MVP - FrontPage)
> > WEBMASTER Resources(tm)
> > http://www.ycoln-resources.com
> > FrontPage Resources, Forums, WebCircle,
> > MS KB Quick Links, etc.
> > ==============================================
> > To assist you in getting the best answers for FrontPage support see:
> > http://www.net-sites.com/sitebuilder/newsgroups.asp
> >
> > "Microsoft News Group" <(E-Mail Removed)> wrote in message
> > news:%231c$(E-Mail Removed)...
> > > My host moved our web site to a newer server after having problems
with
> > > publishing to the old one. We are still experiencing the same issues,
as
> > > follows;
> > >
> > > At the beginning of Processing Web Updates a window pops up stating
"The
> > > server sent a response which FP could not parse. If you are trying to
> > > connect to FP server, check with the server's administrator to make
sure
> > the
> > > FP server extensions are installed properly". We checked, they are!
> > >
> > > The next time, after the Processing Web Updates window, we received a
> pop
> > up
> > > window to re-enter our user name and password, but every time we
insert
> it
> > > and hit the ok button (or Enter on keyboard) the same window pops back
> up
> > > again. This is strange since we can load our web from the server, so
our
> > ID
> > > and PW works. I also tried to upload one of our Sub Webs and it will
not
> > go
> > > in. I used Corel site manager to upload the Sub Web, but when I tried
to
> > go
> > > to the page on the web I received a IE browser window that said I was
> not
> > > authorized to view the page. Does Microsoft ever make anything that
JUST
> > > WORKS?
> > >
> > > Dan
> > >
> > >
> >
> >
>
>

The site, with 3 sub webs is about 50MB. The connection is 56k modem, not
getting disconnected, so this isn't the problem. I will try your suggestions
herein. the web is http://www.imagelair.com, the sub web I mentioned is
http://www.imagelair.com/barbaracostello.

When you say to remove all files with the exception of the _private folder
and images folder, are you including the vti, etc. files?

Dan

"Thomas A. Rowe" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> If this a large site or a site with a few large files?
>
> What kind of internet connection do you have?
>
> Since you are doing a complete republish, it might be best to open the
live
> site directly in FP, and make sure under Tools | Web Settings | Advanced
> that view hidden directories is enabled, then delete all old web content,
> with the exception of the _private folder and images folder, just delete
any
> content within these two folders, then run Tools | Recalculate Hyperlinks.
>
> Then open you local copy and select Publish all pages. If you have
subwebs,
> publish then individually after publishing the root web.
>
> --
>
> ==============================================
> Thomas A. Rowe (Microsoft MVP - FrontPage)
> WEBMASTER Resources(tm)
> http://www.ycoln-resources.com
> FrontPage Resources, Forums, WebCircle,
> MS KB Quick Links, etc.
> ==============================================
> To assist you in getting the best answers for FrontPage support see:
> http://www.net-sites.com/sitebuilder/newsgroups.asp
>
> "Dan" <(E-Mail Removed)> wrote in message
> news:%(E-Mail Removed)...
> > Hi Thomas,
> >
> > Yes Chapel Communications runs the FP Server Extensions, when they
> migrated
> > the web it was working just fine. It was now that I am trying to publish
> our
> > new Web changes, which is a complete re-vamp, so I am having the same
> > problems again.
> >
> > "Thomas A. Rowe" <(E-Mail Removed)> wrote in message
> > news:(E-Mail Removed)...
> > > If the server has the FP extensions...
> > >
> > > When the site was moved, was it published via FP's http mode?
> > >
> > > Run a check on the FP extensions or have them re-installed and then do
> not
> > > use any other method outside of FP to publish content.
> > >
> > > If the server doesn't have the FP extensions, then you can use any FTP
> > > application, as FP can not connect to all FTP servers.
> > >
> > > --
> > >
> > > ==============================================
> > > Thomas A. Rowe (Microsoft MVP - FrontPage)
> > > WEBMASTER Resources(tm)
> > > http://www.ycoln-resources.com
> > > FrontPage Resources, Forums, WebCircle,
> > > MS KB Quick Links, etc.
> > > ==============================================
> > > To assist you in getting the best answers for FrontPage support see:
> > > http://www.net-sites.com/sitebuilder/newsgroups.asp
> > >
> > > "Microsoft News Group" <(E-Mail Removed)> wrote in message
> > > news:%231c$(E-Mail Removed)...
> > > > My host moved our web site to a newer server after having problems
> with
> > > > publishing to the old one. We are still experiencing the same
issues,
> as
> > > > follows;
> > > >
> > > > At the beginning of Processing Web Updates a window pops up stating
> "The
> > > > server sent a response which FP could not parse. If you are trying
to
> > > > connect to FP server, check with the server's administrator to make
> sure
> > > the
> > > > FP server extensions are installed properly". We checked, they are!
> > > >
> > > > The next time, after the Processing Web Updates window, we received
a
> > pop
> > > up
> > > > window to re-enter our user name and password, but every time we
> insert
> > it
> > > > and hit the ok button (or Enter on keyboard) the same window pops
back
> > up
> > > > again. This is strange since we can load our web from the server, so
> our
> > > ID
> > > > and PW works. I also tried to upload one of our Sub Webs and it will
> not
> > > go
> > > > in. I used Corel site manager to upload the Sub Web, but when I
tried
> to
> > > go
> > > > to the page on the web I received a IE browser window that said I
was
> > not
> > > > authorized to view the page. Does Microsoft ever make anything that
> JUST
> > > > WORKS?
> > > >
> > > > Dan
> > > >
> > > >
> > >
> > >
> >
> >
>
>

I am not using FTP, but as you said, FP2000. I don't see any vti folders, I
just remembered they were up on the server when I tried to publish after the
fail FP2000 attempt with Webmaster Site Manager.

I am deleting as you said,but there are two partial sub webs on the server
which I apparently do not have permission to delete because a window pops
that relates to not being able to access a FP.lck file. What do I do about
this?

"Thomas A. Rowe" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Stay out of the site with FTP!
>
> You can not see the _vti folder from within FP, FP will maintain the _vti
> folder which is why I suggest after deleting the content that you can see
> from within FP, to run the Tools | Recalculate Hyperlinks, this will
update
> the _vti folders.
>
> --
>
> ==============================================
> Thomas A. Rowe (Microsoft MVP - FrontPage)
> WEBMASTER Resources(tm)
> http://www.ycoln-resources.com
> FrontPage Resources, Forums, WebCircle,
> MS KB Quick Links, etc.
> ==============================================
> To assist you in getting the best answers for FrontPage support see:
> http://www.net-sites.com/sitebuilder/newsgroups.asp
>
> "Dan" <(E-Mail Removed)> wrote in message
> news:%(E-Mail Removed)...
> > The site, with 3 sub webs is about 50MB. The connection is 56k modem,
not
> > getting disconnected, so this isn't the problem. I will try your
> suggestions
> > herein. the web is http://www.imagelair.com, the sub web I mentioned is
> > http://www.imagelair.com/barbaracostello.
> >
> > When you say to remove all files with the exception of the _private
folder
> > and images folder, are you including the vti, etc. files?
> >
> > Dan
> >
> > "Thomas A. Rowe" <(E-Mail Removed)> wrote in message
> > news:(E-Mail Removed)...
> > > If this a large site or a site with a few large files?
> > >
> > > What kind of internet connection do you have?
> > >
> > > Since you are doing a complete republish, it might be best to open the
> > live
> > > site directly in FP, and make sure under Tools | Web Settings |
Advanced
> > > that view hidden directories is enabled, then delete all old web
> content,
> > > with the exception of the _private folder and images folder, just
delete
> > any
> > > content within these two folders, then run Tools | Recalculate
> Hyperlinks.
> > >
> > > Then open you local copy and select Publish all pages. If you have
> > subwebs,
> > > publish then individually after publishing the root web.
> > >
> > > --
> > >
> > > ==============================================
> > > Thomas A. Rowe (Microsoft MVP - FrontPage)
> > > WEBMASTER Resources(tm)
> > > http://www.ycoln-resources.com
> > > FrontPage Resources, Forums, WebCircle,
> > > MS KB Quick Links, etc.
> > > ==============================================
> > > To assist you in getting the best answers for FrontPage support see:
> > > http://www.net-sites.com/sitebuilder/newsgroups.asp
> > >
> > > "Dan" <(E-Mail Removed)> wrote in message
> > > news:%(E-Mail Removed)...
> > > > Hi Thomas,
> > > >
> > > > Yes Chapel Communications runs the FP Server Extensions, when they
> > > migrated
> > > > the web it was working just fine. It was now that I am trying to
> publish
> > > our
> > > > new Web changes, which is a complete re-vamp, so I am having the
same
> > > > problems again.
> > > >
> > > > "Thomas A. Rowe" <(E-Mail Removed)> wrote in message
> > > > news:(E-Mail Removed)...
> > > > > If the server has the FP extensions...
> > > > >
> > > > > When the site was moved, was it published via FP's http mode?
> > > > >
> > > > > Run a check on the FP extensions or have them re-installed and
then
> do
> > > not
> > > > > use any other method outside of FP to publish content.
> > > > >
> > > > > If the server doesn't have the FP extensions, then you can use any
> FTP
> > > > > application, as FP can not connect to all FTP servers.
> > > > >
> > > > > --
> > > > >
> > > > > ==============================================
> > > > > Thomas A. Rowe (Microsoft MVP - FrontPage)
> > > > > WEBMASTER Resources(tm)
> > > > > http://www.ycoln-resources.com
> > > > > FrontPage Resources, Forums, WebCircle,
> > > > > MS KB Quick Links, etc.
> > > > > ==============================================
> > > > > To assist you in getting the best answers for FrontPage support
see:
> > > > > http://www.net-sites.com/sitebuilder/newsgroups.asp
> > > > >
> > > > > "Microsoft News Group" <(E-Mail Removed)> wrote in message
> > > > > news:%231c$(E-Mail Removed)...
> > > > > > My host moved our web site to a newer server after having
problems
> > > with
> > > > > > publishing to the old one. We are still experiencing the same
> > issues,
> > > as
> > > > > > follows;
> > > > > >
> > > > > > At the beginning of Processing Web Updates a window pops up
> stating
> > > "The
> > > > > > server sent a response which FP could not parse. If you are
trying
> > to
> > > > > > connect to FP server, check with the server's administrator to
> make
> > > sure
> > > > > the
> > > > > > FP server extensions are installed properly". We checked, they
> are!
> > > > > >
> > > > > > The next time, after the Processing Web Updates window, we
> received
> > a
> > > > pop
> > > > > up
> > > > > > window to re-enter our user name and password, but every time we
> > > insert
> > > > it
> > > > > > and hit the ok button (or Enter on keyboard) the same window
pops
> > back
> > > > up
> > > > > > again. This is strange since we can load our web from the
server,
> so
> > > our
> > > > > ID
> > > > > > and PW works. I also tried to upload one of our Sub Webs and it
> will
> > > not
> > > > > go
> > > > > > in. I used Corel site manager to upload the Sub Web, but when I
> > tried
> > > to
> > > > > go
> > > > > > to the page on the web I received a IE browser window that said
I
> > was
> > > > not
> > > > > > authorized to view the page. Does Microsoft ever make anything
> that
> > > JUST
> > > > > > WORKS?
> > > > > >
> > > > > > Dan
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

You host need to run a check or re-install the extensions.

--

==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)
http://www.ycoln-resources.com
FrontPage Resources, Forums, WebCircle,
MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

"Dan" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> I am not using FTP, but as you said, FP2000. I don't see any vti folders,
I
> just remembered they were up on the server when I tried to publish after
the
> fail FP2000 attempt with Webmaster Site Manager.
>
> I am deleting as you said,but there are two partial sub webs on the server
> which I apparently do not have permission to delete because a window pops
> that relates to not being able to access a FP.lck file. What do I do about
> this?
>
> "Thomas A. Rowe" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > Stay out of the site with FTP!
> >
> > You can not see the _vti folder from within FP, FP will maintain the
_vti
> > folder which is why I suggest after deleting the content that you can
see
> > from within FP, to run the Tools | Recalculate Hyperlinks, this will
> update
> > the _vti folders.
> >
> > --
> >
> > ==============================================
> > Thomas A. Rowe (Microsoft MVP - FrontPage)
> > WEBMASTER Resources(tm)
> > http://www.ycoln-resources.com
> > FrontPage Resources, Forums, WebCircle,
> > MS KB Quick Links, etc.
> > ==============================================
> > To assist you in getting the best answers for FrontPage support see:
> > http://www.net-sites.com/sitebuilder/newsgroups.asp
> >
> > "Dan" <(E-Mail Removed)> wrote in message
> > news:%(E-Mail Removed)...
> > > The site, with 3 sub webs is about 50MB. The connection is 56k modem,
> not
> > > getting disconnected, so this isn't the problem. I will try your
> > suggestions
> > > herein. the web is http://www.imagelair.com, the sub web I mentioned
is
> > > http://www.imagelair.com/barbaracostello.
> > >
> > > When you say to remove all files with the exception of the _private
> folder
> > > and images folder, are you including the vti, etc. files?
> > >
> > > Dan
> > >
> > > "Thomas A. Rowe" <(E-Mail Removed)> wrote in message
> > > news:(E-Mail Removed)...
> > > > If this a large site or a site with a few large files?
> > > >
> > > > What kind of internet connection do you have?
> > > >
> > > > Since you are doing a complete republish, it might be best to open
the
> > > live
> > > > site directly in FP, and make sure under Tools | Web Settings |
> Advanced
> > > > that view hidden directories is enabled, then delete all old web
> > content,
> > > > with the exception of the _private folder and images folder, just
> delete
> > > any
> > > > content within these two folders, then run Tools | Recalculate
> > Hyperlinks.
> > > >
> > > > Then open you local copy and select Publish all pages. If you have
> > > subwebs,
> > > > publish then individually after publishing the root web.
> > > >
> > > > --
> > > >
> > > > ==============================================
> > > > Thomas A. Rowe (Microsoft MVP - FrontPage)
> > > > WEBMASTER Resources(tm)
> > > > http://www.ycoln-resources.com
> > > > FrontPage Resources, Forums, WebCircle,
> > > > MS KB Quick Links, etc.
> > > > ==============================================
> > > > To assist you in getting the best answers for FrontPage support see:
> > > > http://www.net-sites.com/sitebuilder/newsgroups.asp
> > > >
> > > > "Dan" <(E-Mail Removed)> wrote in message
> > > > news:%(E-Mail Removed)...
> > > > > Hi Thomas,
> > > > >
> > > > > Yes Chapel Communications runs the FP Server Extensions, when they
> > > > migrated
> > > > > the web it was working just fine. It was now that I am trying to
> > publish
> > > > our
> > > > > new Web changes, which is a complete re-vamp, so I am having the
> same
> > > > > problems again.
> > > > >
> > > > > "Thomas A. Rowe" <(E-Mail Removed)> wrote in message
> > > > > news:(E-Mail Removed)...
> > > > > > If the server has the FP extensions...
> > > > > >
> > > > > > When the site was moved, was it published via FP's http mode?
> > > > > >
> > > > > > Run a check on the FP extensions or have them re-installed and
> then
> > do
> > > > not
> > > > > > use any other method outside of FP to publish content.
> > > > > >
> > > > > > If the server doesn't have the FP extensions, then you can use
any
> > FTP
> > > > > > application, as FP can not connect to all FTP servers.
> > > > > >
> > > > > > --
> > > > > >
> > > > > > ==============================================
> > > > > > Thomas A. Rowe (Microsoft MVP - FrontPage)
> > > > > > WEBMASTER Resources(tm)
> > > > > > http://www.ycoln-resources.com
> > > > > > FrontPage Resources, Forums, WebCircle,
> > > > > > MS KB Quick Links, etc.
> > > > > > ==============================================
> > > > > > To assist you in getting the best answers for FrontPage support
> see:
> > > > > > http://www.net-sites.com/sitebuilder/newsgroups.asp
> > > > > >
> > > > > > "Microsoft News Group" <(E-Mail Removed)> wrote in message
> > > > > > news:%231c$(E-Mail Removed)...
> > > > > > > My host moved our web site to a newer server after having
> problems
> > > > with
> > > > > > > publishing to the old one. We are still experiencing the same
> > > issues,
> > > > as
> > > > > > > follows;
> > > > > > >
> > > > > > > At the beginning of Processing Web Updates a window pops up
> > stating
> > > > "The
> > > > > > > server sent a response which FP could not parse. If you are
> trying
> > > to
> > > > > > > connect to FP server, check with the server's administrator to
> > make
> > > > sure
> > > > > > the
> > > > > > > FP server extensions are installed properly". We checked,
they
> > are!
> > > > > > >
> > > > > > > The next time, after the Processing Web Updates window, we
> > received
> > > a
> > > > > pop
> > > > > > up
> > > > > > > window to re-enter our user name and password, but every time
we
> > > > insert
> > > > > it
> > > > > > > and hit the ok button (or Enter on keyboard) the same window
> pops
> > > back
> > > > > up
> > > > > > > again. This is strange since we can load our web from the
> server,
> > so
> > > > our
> > > > > > ID
> > > > > > > and PW works. I also tried to upload one of our Sub Webs and
it
> > will
> > > > not
> > > > > > go
> > > > > > > in. I used Corel site manager to upload the Sub Web, but when
I
> > > tried
> > > > to
> > > > > > go
> > > > > > > to the page on the web I received a IE browser window that
said
> I
> > > was
> > > > > not
> > > > > > > authorized to view the page. Does Microsoft ever make anything
> > that
> > > > JUST
> > > > > > > WORKS?
> > > > > > >
> > > > > > > Dan
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>