I am setting up an embedded system with physically 1 GB RAM. The disk is a SSD (SLC) 66 GB. It has to work 24/7 unattended, sudden power failure is possible.

EWF RAM protection for c:\ seems to be obvious. What can I do with the pagefile? There is one LabVIEW application running, also a vnc-server.

Boot partition 1 GB?
pagefile small, also on c:\?

If someone has experience on this topic, I would be happy about useful hints!

Martin

Clearly you don't want to put the swap file on the EWF protected
partition. Can you have a second writable partition D: for the swapper?
Or, do you even need the swapper at all? (We have it disabled in our
configuration, but then we have 4GB ram not 1.)


On 20/04/11 1:29 AM, Martin Stoeger wrote:
> I am setting up an embedded system with physically 1 GB RAM. The disk is a SSD (SLC) 66 GB. It has to work 24/7 unattended, sudden power failure is possible.
>
> EWF RAM protection for c:\ seems to be obvious. What can I do with the pagefile? There is one LabVIEW application running, also a vnc-server.
>
> Boot partition 1 GB?
> pagefile small, also on c:\?
>
> If someone has experience on this topic, I would be happy about useful hints!
>
> Martin
>
>