Catalyst 3.8 Must Be Fixed!

When you adjust the 3D setting slider and hit Apply or OK, then come back to
look, the slider will have defaulted back to the Balanced setting.

"me" <(E-Mail Removed)> wrote in message
news:2H_jb.219$(E-Mail Removed)...
>
> Catalyst 3.8 Must Be Fixed!
>
> When you adjust the 3D setting slider and hit Apply or OK, then come back
to
> look, the slider will have defaulted back to the Balanced setting.
>
>
>
>

Mines fine.

Mine OK in both OGL and D3D

--
Regards, Rene Lamontagne

(E-Mail Removed)

"Shawk" <(E-Mail Removed).3-guesses> wrote in message
news:bmpu4m$7dn$(E-Mail Removed)...
>
> "me" <(E-Mail Removed)> wrote in message
> news:2H_jb.219$(E-Mail Removed)...
> >
> > Catalyst 3.8 Must Be Fixed!
> >
> > When you adjust the 3D setting slider and hit Apply or OK, then come
back
> to
> > look, the slider will have defaulted back to the Balanced setting.
> >
> >
> >
> >
>
> Mines fine.
>
>

Just after the adjusting of the slider, press "apply", it should works.


"me" <(E-Mail Removed)> escribió en el mensaje
news:2H_jb.219$(E-Mail Removed)...
>
> Catalyst 3.8 Must Be Fixed!
>
> When you adjust the 3D setting slider and hit Apply or OK, then come back
to
> look, the slider will have defaulted back to the Balanced setting.
>
>
>
>

works for me.



"Cristián Pérez V." <(E-Mail Removed)> wrote in message news:3f908c28@news...
> Just after the adjusting of the slider, press "apply", it should works.
>
>
> "me" <(E-Mail Removed)> escribió en el mensaje
> news:2H_jb.219$(E-Mail Removed)...
> >
> > Catalyst 3.8 Must Be Fixed!
> >
> > When you adjust the 3D setting slider and hit Apply or OK, then come
back
> to
> > look, the slider will have defaulted back to the Balanced setting.
> >
> >
> >
> >
>
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.525 / Virus Database: 322 - Release Date: 10/9/2003

it's all good here

"me" <(E-Mail Removed)> wrote in message
news:2H_jb.219$(E-Mail Removed)...
>
> Catalyst 3.8 Must Be Fixed!
>
> When you adjust the 3D setting slider and hit Apply or OK, then come back
to
> look, the slider will have defaulted back to the Balanced setting.
>
>
>
>

Well good for all of you. It doesn't work for me either. But, a way around
it is simply typing in a name for a custom profile for each, and click save.
Next time you come back, settings will stay applied if you have entered a
name for custom profiles for D3D and OpenGL.

--
www.geocities.com/mtb2k -my site
"me" <(E-Mail Removed)> wrote in message
news:2H_jb.219$(E-Mail Removed)...
>
> Catalyst 3.8 Must Be Fixed!
>
> When you adjust the 3D setting slider and hit Apply or OK, then come back
to
> look, the slider will have defaulted back to the Balanced setting.
>
>
>
>

Best fix is to not use the 3.8 drivers.

-
zlo stood up at show-n-tell, in xz7kb.584683$cF.254669@rwcrnsc53, and said:

> Well good for all of you. It doesn't work for me either. But, a way
> around it is simply typing in a name for a custom profile for each,
> and click save. Next time you come back, settings will stay applied
> if you have entered a name for custom profiles for D3D and OpenGL.
>
>>
>> Catalyst 3.8 Must Be Fixed!
>>
>> When you adjust the 3D setting slider and hit Apply or OK, then come
>> back to look, the slider will have defaulted back to the Balanced
>> setting.

--
Strontium

"It's no surprise, to me. I am my own worst enemy. `Cause every
now, and then, I kick the livin' **** `outta me". - Lit

Funny how some people are having problems with these and some are not.
Luckily, I fall into the "not" category.

I wish Rage3d Tweak worked fine with the 3.8's though. I can't save the
settings for a game profile like I could in the past. However, I figured
out a way around that.

Good luck.

Chris Smith

"Strontium" <(E-Mail Removed)> wrote in message
news:doicnXC1qq4LjgyiU-(E-Mail Removed)...
> Best fix is to not use the 3.8 drivers.
>
> -
> zlo stood up at show-n-tell, in xz7kb.584683$cF.254669@rwcrnsc53, and
said:
>
> > Well good for all of you. It doesn't work for me either. But, a way
> > around it is simply typing in a name for a custom profile for each,
> > and click save. Next time you come back, settings will stay applied
> > if you have entered a name for custom profiles for D3D and OpenGL.
> >
> >>
> >> Catalyst 3.8 Must Be Fixed!
> >>
> >> When you adjust the 3D setting slider and hit Apply or OK, then come
> >> back to look, the slider will have defaulted back to the Balanced
> >> setting.
>
> --
> Strontium
>
> "It's no surprise, to me. I am my own worst enemy. `Cause every
> now, and then, I kick the livin' **** `outta me". - Lit
>
>