Operating system Windows 2000 server
Dynamic disk setup as Spanned Volume, Disk members of this volume are on a
EMC AX100 box.
After a power disclosure disks where not showing up , I did the procedure on
EMC navisphere to set comunication port to port A as usual on this case.
After reboot the disk 1 apears as foreign en disk 2 as online but unallocated.
Tried the import option butr it offer the alert message that the disk is a
spanned one and one member is missing for that we will loose data. So stoped
right there.

Question how to recover previous LDM configuration.

Hi Hilario:

Your question does not seem to be Small Business Server related. Perhaps
the Server 2000 group or EMC tech support?

-Larry

"Hilario" <(E-Mail Removed)> wrote in message
news:0F11AB90-831C-4E73-92E0-(E-Mail Removed)...
> Operating system Windows 2000 server
> Dynamic disk setup as Spanned Volume, Disk members of this volume are on
> a
> EMC AX100 box.
> After a power disclosure disks where not showing up , I did the procedure
> on
> EMC navisphere to set comunication port to port A as usual on this case.
> After reboot the disk 1 apears as foreign en disk 2 as online but
> unallocated.
> Tried the import option butr it offer the alert message that the disk is a
> spanned one and one member is missing for that we will loose data. So
> stoped
> right there.
>
> Question how to recover previous LDM configuration.

EMC tech support, from the sounds of it.(and reason number 1 why I don't
like and don't use spanned volumes except in an emergency when I need to dig
out of a whole while I wait for new disks to come in.)

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel

"Larry Struckmeyer [SBS-MVP]" <(E-Mail Removed)> wrote in
message news:(E-Mail Removed)...
> Hi Hilario:
>
> Your question does not seem to be Small Business Server related. Perhaps
> the Server 2000 group or EMC tech support?
>
> -Larry
>
> "Hilario" <(E-Mail Removed)> wrote in message
> news:0F11AB90-831C-4E73-92E0-(E-Mail Removed)...
>> Operating system Windows 2000 server
>> Dynamic disk setup as Spanned Volume, Disk members of this volume are on
>> a
>> EMC AX100 box.
>> After a power disclosure disks where not showing up , I did the procedure
>> on
>> EMC navisphere to set comunication port to port A as usual on this case.
>> After reboot the disk 1 apears as foreign en disk 2 as online but
>> unallocated.
>> Tried the import option butr it offer the alert message that the disk is
>> a
>> spanned one and one member is missing for that we will loose data. So
>> stoped
>> right there.
>>
>> Question how to recover previous LDM configuration.
>

Hi,

You can scan that unallocated disk with the DiskPatch demo and we can have a
look (submit logfile to our forum), maybe it's fixable. Other option is to
use our iRecover and extract data (will not repair the configuration).

--

Kind regards,
Joep - DIY DataRecovery.nl

http://www.diydatarecovery.nl

Important: When replying to this mail, please include previous
correspondence!

"Hilario" <(E-Mail Removed)> schreef in bericht
news:0F11AB90-831C-4E73-92E0-(E-Mail Removed)...
> Operating system Windows 2000 server
> Dynamic disk setup as Spanned Volume, Disk members of this volume are on
> a
> EMC AX100 box.
> After a power disclosure disks where not showing up , I did the procedure
> on
> EMC navisphere to set comunication port to port A as usual on this case.
> After reboot the disk 1 apears as foreign en disk 2 as online but
> unallocated.
> Tried the import option butr it offer the alert message that the disk is a
> spanned one and one member is missing for that we will loose data. So
> stoped
> right there.
>
> Question how to recover previous LDM configuration.