I have a W2K SP4 server with several SCSI disks hooked up
to it. I had a spanned disk crossing two physical disks.
I shut down the system, added a SCSI disk that had been
formatted and loaded with data on another W2K server. I
needed to change the SCSI ID on one of the physical drives
of the spanned volume. When it powered up, it could not
locate the spanned logical disk. I shut down the system,
disconnected the new SCSI disk and set the SCSI ID of the
spanned disks back to their original settings. When I
powered the system back up, it can see the disks but
cannot reactivate the logical drive.
Any utilities to put this back together again?
|
Similar Threads
