PC Review


Reply
Thread Tools Rate Thread

Drive letters changed in Windows XP setup

 
 
philipdaviddrew@googlemail.com
Guest
Posts: n/a
 
      24th Feb 2007
Hi there, I wondered if anyone could help me with this problem. I have
three active partitions on my hard disk that are designated C, G, and
E in Windows. C is a boot partition where Windows is installed and the
I use the other two for data (mp3s, photos, etc.) G: is listed as a
System partition in Disk Managment, although there is no operating
system installed there. I want to wipe the Windows partition and
reinstall the operating system. The drive is actually a Promise RAID
array on an Asus K8V motherboard, consisting of two 120 GB disks where
all the data is duplicated for safety. When I boot from the Windows
disc and load the RAID drivers from floppy I am given a list of
partitions on the disc where the Windows partition is D and the two
data partions are C and I.

My only option seems to be to delete the Windows partition and install
Windows on D. However, what I don't know is what would happen when I
run the new Windows installation. Will this partition now be called C
or will it still be D? I would prefer Windows to be on C and I assume
programs expect Windows to be on the C drive.

Please can you offer me any advice?

Thanks in advance,
Phil

 
Reply With Quote
 
 
 
 
Larry(LJL269)
Guest
Posts: n/a
 
      24th Feb 2007
Have you tried deleting C in Disk Managment then running OS install?

HTH-Larry

On 24 Feb 2007 08:03:37 -0800, (E-Mail Removed) wrote:

>Hi there, I wondered if anyone could help me with this problem. I have
>three active partitions on my hard disk that are designated C, G, and
>E in Windows. C is a boot partition where Windows is installed and the
>I use the other two for data (mp3s, photos, etc.) G: is listed as a
>System partition in Disk Managment, although there is no operating
>system installed there. I want to wipe the Windows partition and
>reinstall the operating system. The drive is actually a Promise RAID
>array on an Asus K8V motherboard, consisting of two 120 GB disks where
>all the data is duplicated for safety. When I boot from the Windows
>disc and load the RAID drivers from floppy I am given a list of
>partitions on the disc where the Windows partition is D and the two
>data partions are C and I.
>
>My only option seems to be to delete the Windows partition and install
>Windows on D. However, what I don't know is what would happen when I
>run the new Windows installation. Will this partition now be called C
>or will it still be D? I would prefer Windows to be on C and I assume
>programs expect Windows to be on the C drive.
>
>Please can you offer me any advice?
>
>Thanks in advance,
>Phil



Any advise given is my attempt to show appreciation for all
the excellent help I've received here but I'm no MVP so it
may only apply NUGS (Normally, Usually, Generally, Sometimes
 
Reply With Quote
 
phlebas
Guest
Posts: n/a
 
      24th Feb 2007
Thanks for your reply Harry. Haven't tried that yet. I wanted to be
sure about what I was doing before the plunge.

Phil

On 24 Feb, 16:24, "Larry(LJL269)" <N...@EMAIL.COM> wrote:
> Have you tried deleting C in Disk Managment then running OS install?
>
> HTH-Larry
>
> On 24 Feb 2007 08:03:37 -0800, philipdavidd...@googlemail.com wrote:
>
>
>
>
>
> >Hi there, I wondered if anyone could help me with this problem. I have
> >three active partitions on my hard disk that are designated C, G, and
> >E in Windows. C is a boot partition where Windows is installed and the
> >I use the other two for data (mp3s, photos, etc.) G: is listed as a
> >System partition in Disk Managment, although there is no operating
> >system installed there. I want to wipe the Windows partition and
> >reinstall the operating system. The drive is actually a Promise RAID
> >array on an Asus K8V motherboard, consisting of two 120 GB disks where
> >all the data is duplicated for safety. When I boot from the Windows
> >disc and load the RAID drivers from floppy I am given a list of
> >partitions on the disc where the Windows partition is D and the two
> >data partions are C and I.

>
> >My only option seems to be to delete the Windows partition and install
> >Windows on D. However, what I don't know is what would happen when I
> >run the new Windows installation. Will this partition now be called C
> >or will it still be D? I would prefer Windows to be on C and I assume
> >programs expect Windows to be on the C drive.

>
> >Please can you offer me any advice?

>
> >Thanks in advance,
> >Phil

>
> Any advise given is my attempt to show appreciation for all
> the excellent help I've received here but I'm no MVP so it
> may only apply NUGS (Normally, Usually, Generally, Sometimes - Hide quoted text -
>
> - Show quoted text -



 
Reply With Quote
 
Larry(LJL269)
Guest
Posts: n/a
 
      24th Feb 2007
I think if u hid C and made it unbootable with say PMagic7 u could get
both on. I did. U dont want old C anyway, do u?

Right now u r trying to put 2 OS's on which gets tricky esp if both r
XP.

HTH-Larry.

On 24 Feb 2007 09:28:38 -0800, "phlebas"
<(E-Mail Removed)> wrote:

>Thanks for your reply Harry. Haven't tried that yet. I wanted to be
>sure about what I was doing before the plunge.
>
>Phil
>
>On 24 Feb, 16:24, "Larry(LJL269)" <N...@EMAIL.COM> wrote:
>> Have you tried deleting C in Disk Managment then running OS install?
>>
>> HTH-Larry
>>
>> On 24 Feb 2007 08:03:37 -0800, philipdavidd...@googlemail.com wrote:
>>
>>
>>
>>
>>
>> >Hi there, I wondered if anyone could help me with this problem. I have
>> >three active partitions on my hard disk that are designated C, G, and
>> >E in Windows. C is a boot partition where Windows is installed and the
>> >I use the other two for data (mp3s, photos, etc.) G: is listed as a
>> >System partition in Disk Managment, although there is no operating
>> >system installed there. I want to wipe the Windows partition and
>> >reinstall the operating system. The drive is actually a Promise RAID
>> >array on an Asus K8V motherboard, consisting of two 120 GB disks where
>> >all the data is duplicated for safety. When I boot from the Windows
>> >disc and load the RAID drivers from floppy I am given a list of
>> >partitions on the disc where the Windows partition is D and the two
>> >data partions are C and I.

>>
>> >My only option seems to be to delete the Windows partition and install
>> >Windows on D. However, what I don't know is what would happen when I
>> >run the new Windows installation. Will this partition now be called C
>> >or will it still be D? I would prefer Windows to be on C and I assume
>> >programs expect Windows to be on the C drive.

>>
>> >Please can you offer me any advice?

>>
>> >Thanks in advance,
>> >Phil

>>
>> Any advise given is my attempt to show appreciation for all
>> the excellent help I've received here but I'm no MVP so it
>> may only apply NUGS (Normally, Usually, Generally, Sometimes - Hide quoted text -
>>
>> - Show quoted text -

>



Any advise given is my attempt to show appreciation for all
the excellent help I've received here but I'm no MVP so it
may only apply NUGS (Normally, Usually, Generally, Sometimes
 
Reply With Quote
 
John
Guest
Posts: n/a
 
      27th Feb 2007
(E-Mail Removed) wrote:
> Hi there, I wondered if anyone could help me with this problem. I have
> three active partitions on my hard disk that are designated C, G, and
> E in Windows. C is a boot partition where Windows is installed and the
> I use the other two for data (mp3s, photos, etc.) G: is listed as a
> System partition in Disk Managment, although there is no operating
> system installed there. I want to wipe the Windows partition and
> reinstall the operating system. The drive is actually a Promise RAID
> array on an Asus K8V motherboard, consisting of two 120 GB disks where
> all the data is duplicated for safety. When I boot from the Windows
> disc and load the RAID drivers from floppy I am given a list of
> partitions on the disc where the Windows partition is D and the two
> data partions are C and I.
>
> My only option seems to be to delete the Windows partition and install
> Windows on D. However, what I don't know is what would happen when I
> run the new Windows installation. Will this partition now be called C
> or will it still be D? I would prefer Windows to be on C and I assume
> programs expect Windows to be on the C drive.
>
> Please can you offer me any advice?
>
> Thanks in advance,
> Phil




Why are there so many *active* partitions? Unless you have some really
exotic multi-boot needs only one active partition in any one comp is
necessary regardless of how many OS's that comp happens to host. More
than one as you have found out just leads to confusion. Now I am not
saying that the first physical partition on the primary master
absolutely has to be C: and where the comp boots from but most Window's
users expect it to be. I am also not saying that there can't be more
than one active partition but rather that one is generally sufficient
and certainly less confusing.

Anyway ... It appears that in your comp G: has the actual boot strap
files (NTDETECT.COM, ntldr and boot.ini) regardless of MS's mis-naming
conventions. And the XP OS itself (what would be more aptly named the
system) is installed to C: But only you know where G: and C: are
physically located in your comp or if that is even a care for you. For
all I know C: could be the first physical partition of the primary
master or the last partition of the secondary slave?

If you want to be like most users then make the first physical partition
on the primary master the only active partition and then re-install XP
there. The OS and its boot strap files will be on C:. Your data
partitions can each be given a drive letter of your choosing. If this is
not a care then install wherever you want.

As far as apps are concerned, if they haven't the wit to figure out
where Windows is located then just assume that they are too poorly coded
to be worth your bother.


John

 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Drive Letters Changed (After hard drive swap) ChrisOfTheOT Windows XP Configuration 6 25th Oct 2007 04:55 PM
Changed from XP Pro TO W2K Pro - Drive Letters all Changed ! victory@iol.ie Microsoft Windows 2000 3 3rd Jan 2005 11:10 AM
Help; drive letters have changed Bob Microsoft Windows 2000 Hardware 10 1st Nov 2004 10:39 PM
Drive letters changed after replacing hard drive in Windows XP/IomegaZIP disk Mike Windows XP General 7 13th Jul 2004 12:23 PM
Drive letters changed after replacing hard drive in Windows XP/IomegaZIP disk Mike Windows XP Hardware 4 11th Jul 2004 05:46 PM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 04:19 PM.