PC Review


Reply
Thread Tools Rate Thread

Does USB "connector" = socket or plug or both?

 
 
Jon D
Guest
Posts: n/a
 
      13th Feb 2007
Can you explain the what the term "connector" refers to?

I would have *guessed* that "connector" refers to bothe the socket and
the plug.

But when I look at a chart of USB plug and socket dimensions
then I see "connector" being used to describe only the socket.

See http://www.us-electronics.com/files/usbconnectors.pdf.

What is the correct usage of the term "connector" with respect to
computers?

 
Reply With Quote
 
 
 
 
contrex
Guest
Posts: n/a
 
      13th Feb 2007
On 13 Feb, 14:07, Jon D <j...@nomail.com> wrote:

>
> What is the correct usage of the term "connector" with respect to
> computers?


There is no rule. The term can be applied freely to plugs and sockets
depending on the preference of the writer or speaker. Why do you think
that there has to be an officially correct usage? English dictionaries
have been descriptivist for about 150 years. Digital computers are a
comparatively recent development.

 
Reply With Quote
 
Mike T.
Guest
Posts: n/a
 
      13th Feb 2007

"Jon D" <(E-Mail Removed)> wrote in message
news:Xns98D68FBB466A617E53A@127.0.0.1...
> Can you explain the what the term "connector" refers to?
>
> I would have *guessed* that "connector" refers to bothe the socket and
> the plug.
>
> But when I look at a chart of USB plug and socket dimensions
> then I see "connector" being used to describe only the socket.
>
> See http://www.us-electronics.com/files/usbconnectors.pdf.
>
> What is the correct usage of the term "connector" with respect to
> computers?
>


The connector refers to the physical connection. In the case of USB
connectors, it refers to both the plug and the socket that the plug goes
into. If it's being used to refer to the socket only, it might be *assumed*
that the device you are going to use with it has the plug on it
lready. -Dave


 
Reply With Quote
 
MC
Guest
Posts: n/a
 
      13th Feb 2007
Jon D wrote:
> Can you explain the what the term "connector" refers to?


A connector is either the plug, or the socket, or the combination of
both. it only implies the "device to connect with". It can be freely
used for either plug or socket or both, depending on context.

 
Reply With Quote
 
JAD
Guest
Posts: n/a
 
      13th Feb 2007
connector identifies the type of interface being attached. firewire - USB (mini ,A
,B) -serial- parallel -IDE -SATA -Molex




"Jon D" <(E-Mail Removed)> wrote in message news:Xns98D68FBB466A617E53A@127.0.0.1...
> Can you explain the what the term "connector" refers to?
>
> I would have *guessed* that "connector" refers to bothe the socket and
> the plug.
>
> But when I look at a chart of USB plug and socket dimensions
> then I see "connector" being used to describe only the socket.
>
> See http://www.us-electronics.com/files/usbconnectors.pdf.
>
> What is the correct usage of the term "connector" with respect to
> computers?
>



 
Reply With Quote
 
thrugoodmarshall@hotmail.com
Guest
Posts: n/a
 
      13th Feb 2007
On Feb 13, 9:07 am, Jon D <j...@nomail.com> wrote:
> Can you explain the what the term "connector" refers to?
>
> I would have *guessed* that "connector" refers to bothe the socket and
> the plug.
>
> But when I look at a chart of USB plug and socket dimensions
> then I see "connector" being used to describe only the socket.
>
> Seehttp://www.us-electronics.com/files/usbconnectors.pdf.
>
> What is the correct usage of the term "connector" with respect to
> computers?


Like others have said, the nomenclature depends on the application.
Your question is therefore unclear--what do you mean by "socket" and
"plug"?

For this application, find the answer to your question in chapter 6 of
http://www.usb.org/developers/docs/usb_20_05122006.zip
Connector is the generic term; it covers sockets, plugs, receptacles,
etc...

I've used "plug" to mean "the thing that is at the end of a cord", and
"receptacle" to mean "the thing that is mounted in the cabinet", and
"socket" to mean "something at your house, but we don't have any in
the plant".

Of course, when your electrician calls the thing in the cabinet a
"socket" you don't argue with him unless you never want to get any
work done again. Especially since he's probably been doing this for
forty years and will teach you many valuable things if you listen...

 
Reply With Quote
 
MassiveProng
Guest
Posts: n/a
 
      14th Feb 2007
On Tue, 13 Feb 2007 08:34:26 -0800, "JAD" <(E-Mail Removed)>
Gave us:

>connector


All top posting Usenet retards should be ignored until they BONE UP
and learn how to post properly in Usenet.

You are one such retard.

As a side note ALL cross posting retards should be completely
ignored.

Hey, OP, did you not know that cross posting across several ****ing
newsgroups makes you look more stupid than you already do?
 
Reply With Quote
 
MassiveProng
Guest
Posts: n/a
 
      14th Feb 2007
On 13 Feb 2007 08:43:36 -0800, "(E-Mail Removed)"
<(E-Mail Removed)> Gave us:

>Like others have said, the nomenclature depends on the application.
>Your question is therefore unclear--what do you mean by "socket" and
>"plug"?



In THAT particular case, there IS a standard definition.

The socket is fixed, or attached, and the plug is the moving part, or
part at the end of a cable that gets plugged into the fixed location
socket.

A connector refers to any electrical device or system that allows
two separate segments of a circuit to interconnect with each other.

GODDAMNED OVERTLY STUPID CROSS POSTING ****TARDS!
 
Reply With Quote
 
JAD
Guest
Posts: n/a
 
      14th Feb 2007
eat my shorts
petty little man...............boo hoo top poster.............wah wah insult insult big
deal!

"MassiveProng" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> On Tue, 13 Feb 2007 08:34:26 -0800, "JAD" <(E-Mail Removed)>
> Gave us:
>
>>connector

>
> All top posting Usenet retards should be ignored until they BONE UP
> and learn how to post properly in Usenet.
>
> You are one such retard.
>
> As a side note ALL cross posting retards should be completely
> ignored.
>
> Hey, OP, did you not know that cross posting across several ****ing
> newsgroups makes you look more stupid than you already do?



 
Reply With Quote
 
You Know Who ~
Guest
Posts: n/a
 
      14th Feb 2007
Ah, a member of the top posting police. Why can't we call be smart like you
are?

=====================================
"If you make it idiot-proof
They'll make better idiots."


"MassiveProng" <(E-Mail Removed)> wrote in
message news:(E-Mail Removed)...
> On Tue, 13 Feb 2007 08:34:26 -0800, "JAD" <(E-Mail Removed)>
> Gave us:
>
>>connector

>
> All top posting Usenet retards should be ignored until they BONE UP
> and learn how to post properly in Usenet.
>
> You are one such retard.
>
> As a side note ALL cross posting retards should be completely
> ignored.
>
> Hey, OP, did you not know that cross posting across several ****ing
> newsgroups makes you look more stupid than you already do?



 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Add-in "outlook connector extensions" & "default email folders" e bds_mk Microsoft Outlook Discussion 1 10th Jun 2008 12:14 PM
Does USB "connector" = socket or plug or both? Jon D DIY PC 9 14th Feb 2007 10:59 PM
after opening socket, sending data then closing socket 3000 times i get "Only one usage of each socket address" Daniel Microsoft Dot NET 1 15th Mar 2005 12:37 PM
after opening socket, sending data then closing socket 3000 times i get "Only one usage of each socket address" Daniel Microsoft Dot NET Framework 3 12th Feb 2005 03:53 PM
Network problem: "Could not start DB server: socket() failed for UDP socket" Antti Heiskanen Windows XP Networking 3 2nd Apr 2004 09:36 AM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 11:48 PM.