Is this what you want? Double click the series, click on the Options
tab, and change the Gap Width setting.

- Jon
-------
Jon Peltier, Microsoft Excel MVP
Peltier Technical Services
Tutorials and Custom Solutions
http://PeltierTech.com/
_______

That helped, but I did not phrase my question correctly the first time.
Following what you said, I was able to increase the width of the bars in the
bar graph, but it also decreased the gap between each bar. I want to keep the
gap the same while at the same time increasing the width of each bar in the
bar graph.


"Jon Peltier" wrote:

> Is this what you want? Double click the series, click on the Options
> tab, and change the Gap Width setting.
>
> - Jon
> -------
> Jon Peltier, Microsoft Excel MVP
> Peltier Technical Services
> Tutorials and Custom Solutions
> http://PeltierTech.com/
> _______
>
>

Hi Rita -

It's a zero sum game. The only way to increase one without decreasing
the other is to increase the sum, that is, make the entire chart wider.

- Jon
-------
Jon Peltier, Microsoft Excel MVP
Peltier Technical Services
Tutorials and Custom Solutions
http://PeltierTech.com/
_______


Rita wrote:

> That helped, but I did not phrase my question correctly the first time.
> Following what you said, I was able to increase the width of the bars in the
> bar graph, but it also decreased the gap between each bar. I want to keep the
> gap the same while at the same time increasing the width of each bar in the
> bar graph.
>
>
> "Jon Peltier" wrote:
>
>
>>Is this what you want? Double click the series, click on the Options
>>tab, and change the Gap Width setting.
>>
>>- Jon
>>-------
>>Jon Peltier, Microsoft Excel MVP
>>Peltier Technical Services
>>Tutorials and Custom Solutions
>>http://PeltierTech.com/
>>_______
>>
>>

Jon, is there any way to make the width of the bars vary one from another? I
have 10 items whose perfomance I measure performance and I plot their
performance indices. I'd like the one that is the biggest dollar-wise to
have the widest bar. As you indicated below, I can make them all wider or
narrower, and vary the gap between them, but haven't been able to figure out
how to make them different widths. Thanks for any help! Nora

"Jon Peltier" wrote:

> Hi Rita -
>
> It's a zero sum game. The only way to increase one without decreasing
> the other is to increase the sum, that is, make the entire chart wider.
>
> - Jon
> -------
> Jon Peltier, Microsoft Excel MVP
> Peltier Technical Services
> Tutorials and Custom Solutions
> http://PeltierTech.com/
> _______
>
>
> Rita wrote:
>
> > That helped, but I did not phrase my question correctly the first time.
> > Following what you said, I was able to increase the width of the bars in the
> > bar graph, but it also decreased the gap between each bar. I want to keep the
> > gap the same while at the same time increasing the width of each bar in the
> > bar graph.
> >
> >
> > "Jon Peltier" wrote:
> >
> >
> >>Is this what you want? Double click the series, click on the Options
> >>tab, and change the Gap Width setting.
> >>
> >>- Jon
> >>-------
> >>Jon Peltier, Microsoft Excel MVP
> >>Peltier Technical Services
> >>Tutorials and Custom Solutions
> >>http://PeltierTech.com/
> >>_______
> >>
> >>
>

Hi,

Jon has an explanation here,
http://pubs.logicalexpressions.com/P...cle.asp?ID=508

Stephen Bullen has a example (FunChrt5),
http://www.oaltd.co.uk/Excel/SBXLPage.asp#Charting

I have a couple of examples here,
http://www.andypope.info/charts/colwidth.htm
http://www.andypope.info/charts/colwidth2.htm

Cheers
Andy

Nora R wrote:
> Jon, is there any way to make the width of the bars vary one from another? I
> have 10 items whose perfomance I measure performance and I plot their
> performance indices. I'd like the one that is the biggest dollar-wise to
> have the widest bar. As you indicated below, I can make them all wider or
> narrower, and vary the gap between them, but haven't been able to figure out
> how to make them different widths. Thanks for any help! Nora
>
> "Jon Peltier" wrote:
>
>
>>Hi Rita -
>>
>>It's a zero sum game. The only way to increase one without decreasing
>>the other is to increase the sum, that is, make the entire chart wider.
>>
>>- Jon
>>-------
>>Jon Peltier, Microsoft Excel MVP
>>Peltier Technical Services
>>Tutorials and Custom Solutions
>>http://PeltierTech.com/
>>_______
>>
>>
>>Rita wrote:
>>
>>
>>>That helped, but I did not phrase my question correctly the first time.
>>>Following what you said, I was able to increase the width of the bars in the
>>>bar graph, but it also decreased the gap between each bar. I want to keep the
>>>gap the same while at the same time increasing the width of each bar in the
>>>bar graph.
>>>
>>>
>>>"Jon Peltier" wrote:
>>>
>>>
>>>
>>>>Is this what you want? Double click the series, click on the Options
>>>>tab, and change the Gap Width setting.
>>>>
>>>>- Jon
>>>>-------
>>>>Jon Peltier, Microsoft Excel MVP
>>>>Peltier Technical Services
>>>>Tutorials and Custom Solutions
>>>>http://PeltierTech.com/
>>>>_______
>>>>
>>>>
>>

--

Andy Pope, Microsoft MVP - Excel
http://www.andypope.info

Many thanks for your very prompt reply! Nora

"Andy Pope" wrote:

> Hi,
>
> Jon has an explanation here,
> http://pubs.logicalexpressions.com/P...cle.asp?ID=508
>
> Stephen Bullen has a example (FunChrt5),
> http://www.oaltd.co.uk/Excel/SBXLPage.asp#Charting
>
> I have a couple of examples here,
> http://www.andypope.info/charts/colwidth.htm
> http://www.andypope.info/charts/colwidth2.htm
>
> Cheers
> Andy
>
> Nora R wrote:
> > Jon, is there any way to make the width of the bars vary one from another? I
> > have 10 items whose perfomance I measure performance and I plot their
> > performance indices. I'd like the one that is the biggest dollar-wise to
> > have the widest bar. As you indicated below, I can make them all wider or
> > narrower, and vary the gap between them, but haven't been able to figure out
> > how to make them different widths. Thanks for any help! Nora
> >
> > "Jon Peltier" wrote:
> >
> >
> >>Hi Rita -
> >>
> >>It's a zero sum game. The only way to increase one without decreasing
> >>the other is to increase the sum, that is, make the entire chart wider.
> >>
> >>- Jon
> >>-------
> >>Jon Peltier, Microsoft Excel MVP
> >>Peltier Technical Services
> >>Tutorials and Custom Solutions
> >>http://PeltierTech.com/
> >>_______
> >>
> >>
> >>Rita wrote:
> >>
> >>
> >>>That helped, but I did not phrase my question correctly the first time.
> >>>Following what you said, I was able to increase the width of the bars in the
> >>>bar graph, but it also decreased the gap between each bar. I want to keep the
> >>>gap the same while at the same time increasing the width of each bar in the
> >>>bar graph.
> >>>
> >>>
> >>>"Jon Peltier" wrote:
> >>>
> >>>
> >>>
> >>>>Is this what you want? Double click the series, click on the Options
> >>>>tab, and change the Gap Width setting.
> >>>>
> >>>>- Jon
> >>>>-------
> >>>>Jon Peltier, Microsoft Excel MVP
> >>>>Peltier Technical Services
> >>>>Tutorials and Custom Solutions
> >>>>http://PeltierTech.com/
> >>>>_______
> >>>>
> >>>>
> >>
>
> --
>
> Andy Pope, Microsoft MVP - Excel
> http://www.andypope.info
>