I am use to using the margin changing lines at the top of the Word 2003
screen to individually adjust a margin for a line. Wiggling the text a
small amount to the right or left.
I have a line if it had room for one more character I could fit all the
words I want on the line in it. But, I can not figure out how to adjust the
margin for just that one line in Word 2007. Word 2003, I there is a ruler
line bar at the top of the screen I could adjust the one line to be a little
bit wider. Is there such an option in Word 2007??
Thanks Russ - www.techexpressinc.com

You can drag the indent indicators in Word 2007 too. To display the ruler,
click "Ruler" on the View tab of the ribbon (the command is found in the
Show/Hide group).

Alternatively, type the desired negative right (or left) indent in the
Paragraph group of the Page Layout ribbon. Or click the dialog box launcher
to display the Paragraph dialog box; it shows you all of the available
options.

--
Stefan Blom
Microsoft Word MVP


"Excel Lowest Value" <(E-Mail Removed)> wrote in
message news:B2270B63-34B1-41A4-9C4C-(E-Mail Removed)...
>I am use to using the margin changing lines at the top of the Word 2003
> screen to individually adjust a margin for a line. Wiggling the text a
> small amount to the right or left.
> I have a line if it had room for one more character I could fit all the
> words I want on the line in it. But, I can not figure out how to adjust
> the
> margin for just that one line in Word 2007. Word 2003, I there is a
> ruler
> line bar at the top of the screen I could adjust the one line to be a
> little
> bit wider. Is there such an option in Word 2007??
> Thanks Russ - www.techexpressinc.com

Clarification: Of course, indentation is not for individual lines, but for
whole paragraphs.

--
Stefan Blom
Microsoft Word MVP


"Stefan Blom" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> You can drag the indent indicators in Word 2007 too. To display the ruler,
> click "Ruler" on the View tab of the ribbon (the command is found in the
> Show/Hide group).
>
> Alternatively, type the desired negative right (or left) indent in the
> Paragraph group of the Page Layout ribbon. Or click the dialog box
> launcher
> to display the Paragraph dialog box; it shows you all of the available
> options.
>
> --
> Stefan Blom
> Microsoft Word MVP
>
>
> "Excel Lowest Value" <(E-Mail Removed)> wrote in
> message news:B2270B63-34B1-41A4-9C4C-(E-Mail Removed)...
>>I am use to using the margin changing lines at the top of the Word 2003
>> screen to individually adjust a margin for a line. Wiggling the text a
>> small amount to the right or left.
>> I have a line if it had room for one more character I could fit all the
>> words I want on the line in it. But, I can not figure out how to adjust
>> the
>> margin for just that one line in Word 2007. Word 2003, I there is a
>> ruler
>> line bar at the top of the screen I could adjust the one line to be a
>> little
>> bit wider. Is there such an option in Word 2007??
>> Thanks Russ - www.techexpressinc.com
>
>
>

Very Good. Thx

"Stefan Blom" wrote:

> You can drag the indent indicators in Word 2007 too. To display the ruler,
> click "Ruler" on the View tab of the ribbon (the command is found in the
> Show/Hide group).
>
> Alternatively, type the desired negative right (or left) indent in the
> Paragraph group of the Page Layout ribbon. Or click the dialog box launcher
> to display the Paragraph dialog box; it shows you all of the available
> options.
>
> --
> Stefan Blom
> Microsoft Word MVP
>
>
> "Excel Lowest Value" <(E-Mail Removed)> wrote in
> message news:B2270B63-34B1-41A4-9C4C-(E-Mail Removed)...
> >I am use to using the margin changing lines at the top of the Word 2003
> > screen to individually adjust a margin for a line. Wiggling the text a
> > small amount to the right or left.
> > I have a line if it had room for one more character I could fit all the
> > words I want on the line in it. But, I can not figure out how to adjust
> > the
> > margin for just that one line in Word 2007. Word 2003, I there is a
> > ruler
> > line bar at the top of the screen I could adjust the one line to be a
> > little
> > bit wider. Is there such an option in Word 2007??
> > Thanks Russ - www.techexpressinc.com
>
>
>
>

And there are other ways to fit copy (see
http://word.mvps.org/FAQs/Formatting/FitCopy.htm). One of the first buttons
I'll probably add to the QAT is the one I use to condense the font by 0.1
point. <g>

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Stefan Blom" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Clarification: Of course, indentation is not for individual lines, but for
> whole paragraphs.
>
> --
> Stefan Blom
> Microsoft Word MVP
>
>
> "Stefan Blom" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > You can drag the indent indicators in Word 2007 too. To display the
ruler,
> > click "Ruler" on the View tab of the ribbon (the command is found in the
> > Show/Hide group).
> >
> > Alternatively, type the desired negative right (or left) indent in the
> > Paragraph group of the Page Layout ribbon. Or click the dialog box
> > launcher
> > to display the Paragraph dialog box; it shows you all of the available
> > options.
> >
> > --
> > Stefan Blom
> > Microsoft Word MVP
> >
> >
> > "Excel Lowest Value" <(E-Mail Removed)> wrote
in
> > message news:B2270B63-34B1-41A4-9C4C-(E-Mail Removed)...
> >>I am use to using the margin changing lines at the top of the Word 2003
> >> screen to individually adjust a margin for a line. Wiggling the text
a
> >> small amount to the right or left.
> >> I have a line if it had room for one more character I could fit all the
> >> words I want on the line in it. But, I can not figure out how to
adjust
> >> the
> >> margin for just that one line in Word 2007. Word 2003, I there is a
> >> ruler
> >> line bar at the top of the screen I could adjust the one line to be a
> >> little
> >> bit wider. Is there such an option in Word 2007??
> >> Thanks Russ - www.techexpressinc.com
> >
> >
> >
>
>
>
>

You are welcome.

--
Stefan Blom
Microsoft Word MVP


"Excel Lowest Value" <(E-Mail Removed)> wrote in
message news:F15E695F-90AA-4786-BBD3-(E-Mail Removed)...
> Very Good. Thx
>
> "Stefan Blom" wrote:
>
>> You can drag the indent indicators in Word 2007 too. To display the
>> ruler,
>> click "Ruler" on the View tab of the ribbon (the command is found in the
>> Show/Hide group).
>>
>> Alternatively, type the desired negative right (or left) indent in the
>> Paragraph group of the Page Layout ribbon. Or click the dialog box
>> launcher
>> to display the Paragraph dialog box; it shows you all of the available
>> options.
>>
>> --
>> Stefan Blom
>> Microsoft Word MVP
>>
>>
>> "Excel Lowest Value" <(E-Mail Removed)> wrote
>> in
>> message news:B2270B63-34B1-41A4-9C4C-(E-Mail Removed)...
>> >I am use to using the margin changing lines at the top of the Word 2003
>> > screen to individually adjust a margin for a line. Wiggling the text
>> > a
>> > small amount to the right or left.
>> > I have a line if it had room for one more character I could fit all the
>> > words I want on the line in it. But, I can not figure out how to
>> > adjust
>> > the
>> > margin for just that one line in Word 2007. Word 2003, I there is a
>> > ruler
>> > line bar at the top of the screen I could adjust the one line to be a
>> > little
>> > bit wider. Is there such an option in Word 2007??
>> > Thanks Russ - www.techexpressinc.com
>>
>>
>>
>>

Good point.

--
Stefan Blom
Microsoft Word MVP


"Suzanne S. Barnhill" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> And there are other ways to fit copy (see
> http://word.mvps.org/FAQs/Formatting/FitCopy.htm). One of the first
> buttons
> I'll probably add to the QAT is the one I use to condense the font by 0.1
> point. <g>
>
> --
> Suzanne S. Barnhill
> Microsoft MVP (Word)
> Words into Type
> Fairhope, Alabama USA
> Word MVP FAQ site: http://word.mvps.org
> Email cannot be acknowledged; please post all follow-ups to the newsgroup
> so
> all may benefit.
>
> "Stefan Blom" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> Clarification: Of course, indentation is not for individual lines, but
>> for
>> whole paragraphs.
>>
>> --
>> Stefan Blom
>> Microsoft Word MVP
>>
>>
>> "Stefan Blom" <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed)...
>> > You can drag the indent indicators in Word 2007 too. To display the
> ruler,
>> > click "Ruler" on the View tab of the ribbon (the command is found in
>> > the
>> > Show/Hide group).
>> >
>> > Alternatively, type the desired negative right (or left) indent in the
>> > Paragraph group of the Page Layout ribbon. Or click the dialog box
>> > launcher
>> > to display the Paragraph dialog box; it shows you all of the available
>> > options.
>> >
>> > --
>> > Stefan Blom
>> > Microsoft Word MVP
>> >
>> >
>> > "Excel Lowest Value" <(E-Mail Removed)> wrote
> in
>> > message news:B2270B63-34B1-41A4-9C4C-(E-Mail Removed)...
>> >>I am use to using the margin changing lines at the top of the Word 2003
>> >> screen to individually adjust a margin for a line. Wiggling the text
> a
>> >> small amount to the right or left.
>> >> I have a line if it had room for one more character I could fit all
>> >> the
>> >> words I want on the line in it. But, I can not figure out how to
> adjust
>> >> the
>> >> margin for just that one line in Word 2007. Word 2003, I there is a
>> >> ruler
>> >> line bar at the top of the screen I could adjust the one line to be a
>> >> little
>> >> bit wider. Is there such an option in Word 2007??
>> >> Thanks Russ - www.techexpressinc.com
>> >
>> >
>> >
>>
>>
>>
>>
>