This is a hardware error.
I had this error at home a while back... Not with Windows Defender but with
a disk defragmenter. In the end it meant that my disk was failing. Chkdsk is
fine, because there's no corruption yet, but beware: you should back up all
important data off the disk, because there is a good chance it will die soon.
My disk lasted for another 2 months before dying.
Hope this helps,
--
Philip Taron
SDE/T, Antimalware
Microsoft Corporation
"SCSLLC" wrote:
> Not sure if this is the right group to post this to but I'm seeing various
> DMIO errors in my system log during my nightly WD full scan. They start a
> few minutes after tha scan starts and end shortly before the scan ends. I've
> changed the start time on the scan several time to see if it's unrelated but
> the errors always occur during the scan. The errors in a repeating pattern.
> I get 5 'error detected... during a paging operation' followed by 1 'read
> error at block...' followed by 1 'Uncorrectable read error'. Recovery
> Console chkdsk /r comes out clean and Samsung's disk util finds no errors.
> Disks are mirrored 160GB Samsung SATAs on a ABIT Kv8Pro w/ AMD Athlon 64 3000
> CPU. Memory is 1GB Corsair 3200XMS (2x512). XP SP2 with all updates. No
> such errors during in-depth virus scanning or Retrospect full system backup.
> I suspect a bad block but can't figure out why nothing detects it. Thanks in
> advance for any ideas or suggestions.
|
Similar Threads
