Windows XP Ide controller changes from DMA Mode to PIO
Mode, where can I get the hotfix or any other resolution.
Thanks

Firstly, it is (more that likely) NOT a Windows XP IDE controller. The
controller is physically part of the motherboard and the M/B manufacturer
supplies drivers for their controller. Many of these controllers are
designed to "step down" in performance if read/write errors are detected.
Some of them will "lock" you in PIO mode, some reset automatically upon a
reboot.

For the ones that lock, use devise manager to uninstall the IDE/Atapi
controller. Reboot! The controller will be re-detected and installed. Also,
go to the web site of the manufacturer of your M/B for updated M/B drivers!

NOTE: In many cases this is a sign of impending hard drive trouble.

--
Regards:

Richard Urban

aka Crusty (-: Old B@stard :-)

"Vinnie" <(E-Mail Removed)> wrote in message
news:1411f01c41b5d$491b2240$(E-Mail Removed)...
> Windows XP Ide controller changes from DMA Mode to PIO
> Mode, where can I get the hotfix or any other resolution.
> Thanks

>-----Original Message-----
>Windows XP Ide controller changes from DMA Mode to PIO
>Mode, where can I get the hotfix or any other
resolution.
>Thanks
>.
>http://www.microsoft.com/whdc/hwdev/tech/storage/IDE-
DMA.mspx

You need to read this article -
DMA Mode for ATA/ATAPI Devices in Windows XP
http://www.microsoft.com/whdc/hwdev/...e/IDE-DMA.mspx HTH.

--
Just my 2¢ worth
Jeff
__________in response to__________

"Vinnie" <(E-Mail Removed)> wrote in message news:1411f01c41b5d$491b2240$(E-Mail Removed)...
| Windows XP Ide controller changes from DMA Mode to PIO
| Mode, where can I get the hotfix or any other resolution.
| Thanks