While copying DVD data from hard drive to DVD drive I had a series of ATAPI
errors,
From the System log:
>>>
Warning:
"An error was detected on device \Device\Harddisk0\DR0 during a paging
operation. "
Error:
"The device, \Device\Ide\IdePort0, did not respond within the timeout
period." >>>>


and now my hard drive a Western Digital 80 gig special edition (8MB cache)
is running in PIO mode and I'm lost at what to do to return it to DMA.
Please let me know if you find a fix. Performance is horrible now. Transfer
mode is at "DMA if available" and the CMOS has DMA enabled.

Nevermind uninstalling the driver did the trick.



"Etienne Mitchel" <(E-Mail Removed)> wrote in message
news:cz9kb.183354$(E-Mail Removed)...
> While copying DVD data from hard drive to DVD drive I had a series of
ATAPI
> errors,
> From the System log:
> >>>
> Warning:
> "An error was detected on device \Device\Harddisk0\DR0 during a paging
> operation. "
> Error:
> "The device, \Device\Ide\IdePort0, did not respond within the timeout
> period." >>>>
>
>
> and now my hard drive a Western Digital 80 gig special edition (8MB cache)
> is running in PIO mode and I'm lost at what to do to return it to DMA.
> Please let me know if you find a fix. Performance is horrible now.
Transfer
> mode is at "DMA if available" and the CMOS has DMA enabled.
>
>