PC Review


Reply
Thread Tools Rate Thread

Display problem - where does the fault lie?

 
 
Charles Tosh
Guest
Posts: n/a
 
      14th Dec 2005
Symptoms:

A couple of weeks ago, my computer (with a 5-year old 250w unbranded PSU -
the rest of it is about 2 years old) stopped turning on when I pressed the
power button. A bit of turning off/on the power at the plug eventually
persuaded it to turn on. It did this a few times and hasn't been a problem
since. At the time I thought, "PSU's on its way out..."

Today, the machine's been idling for a while, and I come to find it
semi-frozen - the display looks like it does when you hold a cellphone
that's in use right next to a monitor - and the cursor moves jumpily across
the screen when the mouse is moved. Doesn't seem to accept any keyboard
input, won't "do anything" in response to mouse clicks. I power off, power
on - display is corrupted right from the first screen (BIOS information,
POST). Boots into Windows, runs normally but with corrupted display, and
then goes into that semi-frozen state again.

I tried another monitor, same thing. I left it to cool down for a while,
same thing. I throttled back the CPU, unplugged the hard discs etc - same
thing.

I then removed the graphics card (an NVIDIA GeForce FX5700 Ultra) and dusted
off the cooling fan, the AGP slot, and the card itself. I also dusted the
CPU fan a bit, but it wasn't really dusty.

Following this, the display was almost normal when I booted up, and Windows
looked fine until I ran a game. The opening cutscene was slightly
corrupted, the menu display very corrupted, and the in-game display was
utterly whacked out. The PC ran fine after returning to Windows, but the
display never cleared up again, until I rebooted. Then same thing - fine
until I ran a game, corrupt afterwards.

I'm a bit stumped now. I'm not sure where the problem lies. I'm assuming
it's not a driver fault because the display was whacky even before loading
Windows, and I don't have much experience with hardware problems.

Please help!

Charles



 
Reply With Quote
 
 
 
 
kony
Guest
Posts: n/a
 
      14th Dec 2005
On Wed, 14 Dec 2005 18:04:41 GMT, "Charles Tosh"
<(E-Mail Removed)> wrote:

>Symptoms:
>
>A couple of weeks ago, my computer (with a 5-year old 250w unbranded PSU -
>the rest of it is about 2 years old) stopped turning on when I pressed the
>power button. A bit of turning off/on the power at the plug eventually
>persuaded it to turn on. It did this a few times and hasn't been a problem
>since. At the time I thought, "PSU's on its way out..."
>
>Today, the machine's been idling for a while, and I come to find it
>semi-frozen - the display looks like it does when you hold a cellphone
>that's in use right next to a monitor - and the cursor moves jumpily across
>the screen when the mouse is moved. Doesn't seem to accept any keyboard
>input, won't "do anything" in response to mouse clicks. I power off, power
>on - display is corrupted right from the first screen (BIOS information,
>POST). Boots into Windows, runs normally but with corrupted display, and
>then goes into that semi-frozen state again.
>
>I tried another monitor, same thing. I left it to cool down for a while,
>same thing. I throttled back the CPU, unplugged the hard discs etc - same
>thing.
>
>I then removed the graphics card (an NVIDIA GeForce FX5700 Ultra) and dusted
>off the cooling fan, the AGP slot, and the card itself. I also dusted the
>CPU fan a bit, but it wasn't really dusty.
>
>Following this, the display was almost normal when I booted up, and Windows
>looked fine until I ran a game. The opening cutscene was slightly
>corrupted, the menu display very corrupted, and the in-game display was
>utterly whacked out. The PC ran fine after returning to Windows, but the
>display never cleared up again, until I rebooted. Then same thing - fine
>until I ran a game, corrupt afterwards.
>
>I'm a bit stumped now. I'm not sure where the problem lies. I'm assuming
>it's not a driver fault because the display was whacky even before loading
>Windows, and I don't have much experience with hardware problems.



You've been using a poor generic PSU that's unsuitable for
the system... at this point you may have worn out capacitors
and damaged several parts and to nail this down you will
have to try all parts isolated- easiest done with a 2nd
compatible system for parts substitutions.

First thing I'd do is get a better power supply and just try
the system. Continuing to use this questionable one and
diagnosing parts acting up (possibly due to) with poor power
could leave the initial problem.

Inspect capacitors on the motherboard, and in the power
supply after having left it unplugged from AC for several
minutes. Take voltage readings of the power supply output,
at the connector to the motherboard with a multimeter, NOT
on the open PSU unless you are competent to do so.
 
Reply With Quote
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Excel display Fault Gilbert Bani Microsoft Excel Misc 5 8th Dec 2009 08:30 PM
Invalid Page Fault and Stack fault in kernel32.dll Mullai Microsoft VC .NET 0 28th Jul 2006 06:31 AM
HELP!! Despite of having fixed a fault by selecting a Restore Point, at next full reboot, fault shows up again!! Philippe Borel [Switzerland] Windows XP Help 2 19th Aug 2004 08:09 AM
invalid page fault/general protection fault issues OrbitalKai Windows XP Internet Explorer 0 25th Nov 2003 09:28 PM
IE6 closing General Protection Fault or Invalid Page Fault bcr Windows XP Internet Explorer 0 24th Oct 2003 10:44 AM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 05:47 PM.