I have a Domain Controller (Windows 2000 Server) also a
DHCP Server on a Network. i have a lancar with PXE enabled
(client can boot from network). How can i configure my
server so that i can boot a diskless workstation from
Network
Thanks in advance
Muhammad Sajid

1. Ensure bootprom chip is working in NIC

2. Configure DHCP options to MAC address, bootfile name and boot server
options

3. Create bootable Network Client Disk

4. Boot to network on disk, change directory to tftpboot

5. Run imagegen

6. tftp boot download folder has to be the same as where image file is
located







"Muhammad Sajid" <(E-Mail Removed)> wrote in message
news:0e2701c425fd$1d21bb40$(E-Mail Removed)...
> I have a Domain Controller (Windows 2000 Server) also a
> DHCP Server on a Network. i have a lancar with PXE enabled
> (client can boot from network). How can i configure my
> server so that i can boot a diskless workstation from
> Network
> Thanks in advance
> Muhammad Sajid

Is there a URL you can suggest to investigate this further?

Thanks
Saga

"El Marko" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
>
>
>
> 1. Ensure bootprom chip is working in NIC
>
> 2. Configure DHCP options to MAC address, bootfile name and boot server
> options
>
> 3. Create bootable Network Client Disk
>
> 4. Boot to network on disk, change directory to tftpboot
>
> 5. Run imagegen
>
> 6. tftp boot download folder has to be the same as where image file is
> located
>
>
>
>
>
>
>
> "Muhammad Sajid" <(E-Mail Removed)> wrote in message
> news:0e2701c425fd$1d21bb40$(E-Mail Removed)...
> > I have a Domain Controller (Windows 2000 Server) also a
> > DHCP Server on a Network. i have a lancar with PXE enabled
> > (client can boot from network). How can i configure my
> > server so that i can boot a diskless workstation from
> > Network
> > Thanks in advance
> > Muhammad Sajid
>
>

Unfortunately, no. This was a proceedure I had to use on my own here at the
office to make sure our diskless workstations would be able to login to a
Windows 2000 server.

The tftpboot part may not be necessary. I needed to create that to download
an image file for the workstations to use in our MFG department. Probably
the first three steps might be all that's needed just to get on the network.
And in step 2, reserve an IP address to the MAC address of the card. Again,
depending on your requirements, you may not need to do a bootfile and
bootserver option.

mm



"Saga" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
> Is there a URL you can suggest to investigate this further?
>
> Thanks
> Saga
>
> "El Marko" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> >
> >
> >
> >
> > 1. Ensure bootprom chip is working in NIC
> >
> > 2. Configure DHCP options to MAC address, bootfile name and boot server
> > options
> >
> > 3. Create bootable Network Client Disk
> >
> > 4. Boot to network on disk, change directory to tftpboot
> >
> > 5. Run imagegen
> >
> > 6. tftp boot download folder has to be the same as where image file is
> > located
> >
> >
> >
> >
> >
> >
> >
> > "Muhammad Sajid" <(E-Mail Removed)> wrote in message
> > news:0e2701c425fd$1d21bb40$(E-Mail Removed)...
> > > I have a Domain Controller (Windows 2000 Server) also a
> > > DHCP Server on a Network. i have a lancar with PXE enabled
> > > (client can boot from network). How can i configure my
> > > server so that i can boot a diskless workstation from
> > > Network
> > > Thanks in advance
> > > Muhammad Sajid
> >
> >
>
>

"Muhammad Sajid" <(E-Mail Removed)> wrote in
news:0e2701c425fd$1d21bb40$(E-Mail Removed):

> I have a Domain Controller (Windows 2000 Server) also a
> DHCP Server on a Network. i have a lancar with PXE enabled
> (client can boot from network). How can i configure my
> server so that i can boot a diskless workstation from
> Network
> Thanks in advance
> Muhammad Sajid
>

Try Qualystem LanPC

http://www.qualystem.com/en/lannetpc.html