"Geek" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> If you have important information on that drive make sure you back it up
> because very soon you will need a new Hard Drive!
Well, the drive slaves to a Western Digital in another computer and seems
just fine. I ran diagnostics including Maxtor's PowerMax and all came up
OK. I did back up the critical data.
I'm now thinking it's the motherboard. I've never heard of another
component that would cause a hard disk to not be detected.
WW
> "WaterWatcher" <(E-Mail Removed)> wrote in message
> news:EQx3c.532435$na.1320699@attbi_s04...
> > Hi all. I've an ASUS A7V based computer with a Duron 900, Maxtor 30GB
HD,
> > GeForce video card, Afreey CD-ROM, SoundBlaster Live!, PowerMan 235W
PSU
> > and a NetGear NIC. Recently, it started to fail to boot with a Disk
Boot
> > Failure message (does not detect the drive) and will emit a beep-beep
> > followed by a pause, then another beep-beep, and so on. I've tried the
> > onboard Promise ATA 100 controller as well as the "standard" controller
> with
> > equal results: It will boot a few times and then resort to the failure
> > message and beeps. I also got the same results after replacing the IDE
> > cable. S.M.A.R.T. does not report any problems when the drive is
> detected,
> > and when it does boot, it runs WinXP just fine. Temps and voltages seem
> to
> > be OK in the BIOS.
> >
> > Any ideas? I'd like to get some feedback before I start throwing new
> parts
> > at it. Thanks for any replies.
> >
> > WW
> >
> >
>
>
|