Hi!

I run a dual stack setup.

Assumption : ports 135 and/or 445 are needed for file sharing.

I want to be able to use file sharing over IPv4 on my local net, but
want to disable the ports 135, 445 (and 1026 too, the lsass.exe port)
on IPv6. They buth run on the same interface (ethernet card).

Is this possible ?

(if the above assumption is wrong, then I will just disable these
ports for both protocols)

Thanks and regards,
David

<(E-Mail Removed)> wrote in message
news:463e5ccf-3fe9-414e-a933-(E-Mail Removed)...
> Hi!
>
> I run a dual stack setup.
>
> Assumption : ports 135 and/or 445 are needed for file sharing.
>
> I want to be able to use file sharing over IPv4 on my local net, but
> want to disable the ports 135, 445 (and 1026 too, the lsass.exe port)
> on IPv6. They buth run on the same interface (ethernet card).
>
> Is this possible ?
>
> (if the above assumption is wrong, then I will just disable these
> ports for both protocols)
Hi, I suggest you cross-post this question in
microsoft.public.platformsdk.networking.ipv6 instead of asking here.

--
Allan