I'm using a HTPC that has a Radeon X600 video card. I have installed the most
up to date drivers in it from the ATI site and I still have the same problem.
My Screen is a Dell Projector 3400mp. When windows is starting up and when it
is logging it the screen is normal. When it finishes logging it the screen
will dim down very low. My cursor will stay bright and fine but all of
windows is very dim in the back ground. The projector is hooked up through
the DVI side of the card. If I shutdown windows and hook up a monitor to the
VGA side it does fine. Windows runs fine but it is very very dim after
windows loads. Any ideas?

Driver issue I suspect, have you tried using the native drivers that come
with Vista?
--
Andre
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta
"Josh" <(E-Mail Removed)> wrote in message
news:650CE242-750A-4320-90D1-(E-Mail Removed)...
> I'm using a HTPC that has a Radeon X600 video card. I have installed the
> most
> up to date drivers in it from the ATI site and I still have the same
> problem.
> My Screen is a Dell Projector 3400mp. When windows is starting up and when
> it
> is logging it the screen is normal. When it finishes logging it the screen
> will dim down very low. My cursor will stay bright and fine but all of
> windows is very dim in the back ground. The projector is hooked up through
> the DVI side of the card. If I shutdown windows and hook up a monitor to
> the
> VGA side it does fine. Windows runs fine but it is very very dim after
> windows loads. Any ideas?

Yea I have It is a fresh install of vista and it did it so I was able to make
it to ATI website to get the up to date drivers and it still does the same
thing

"Andre Da Costa [Extended64]" wrote:

> Driver issue I suspect, have you tried using the native drivers that come
> with Vista?
> --
> Andre
> Extended64 | http://www.extended64.com
> Blog | http://www.extended64.com/blogs/andre
> http://spaces.msn.com/members/adacosta
> "Josh" <(E-Mail Removed)> wrote in message
> news:650CE242-750A-4320-90D1-(E-Mail Removed)...
> > I'm using a HTPC that has a Radeon X600 video card. I have installed the
> > most
> > up to date drivers in it from the ATI site and I still have the same
> > problem.
> > My Screen is a Dell Projector 3400mp. When windows is starting up and when
> > it
> > is logging it the screen is normal. When it finishes logging it the screen
> > will dim down very low. My cursor will stay bright and fine but all of
> > windows is very dim in the back ground. The projector is hooked up through
> > the DVI side of the card. If I shutdown windows and hook up a monitor to
> > the
> > VGA side it does fine. Windows runs fine but it is very very dim after
> > windows loads. Any ideas?
>
>
>

Ok new devolpment.

If I create a new user it will work fine for a few restarts and then it will
go back to the dimmed screen after login. The new user profile seems to help
it untill something is saved in it and it goes back like the other profiles.
Any ideas with this one. Thanks in Advance Josh

"Andre Da Costa [Extended64]" wrote:

> Driver issue I suspect, have you tried using the native drivers that come
> with Vista?
> --
> Andre
> Extended64 | http://www.extended64.com
> Blog | http://www.extended64.com/blogs/andre
> http://spaces.msn.com/members/adacosta
> "Josh" <(E-Mail Removed)> wrote in message
> news:650CE242-750A-4320-90D1-(E-Mail Removed)...
> > I'm using a HTPC that has a Radeon X600 video card. I have installed the
> > most
> > up to date drivers in it from the ATI site and I still have the same
> > problem.
> > My Screen is a Dell Projector 3400mp. When windows is starting up and when
> > it
> > is logging it the screen is normal. When it finishes logging it the screen
> > will dim down very low. My cursor will stay bright and fine but all of
> > windows is very dim in the back ground. The projector is hooked up through
> > the DVI side of the card. If I shutdown windows and hook up a monitor to
> > the
> > VGA side it does fine. Windows runs fine but it is very very dim after
> > windows loads. Any ideas?
>
>
>

I suspect you are seeing a driver issue here, the best recommendation is to
report issue to ATI and use feedback tool on your desktop to make a report
to Microsoft about issue.
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

"Josh" <(E-Mail Removed)> wrote in message
news:064AEFA1-1589-48DE-9957-(E-Mail Removed)...
> Ok new devolpment.
>
> If I create a new user it will work fine for a few restarts and then it
> will
> go back to the dimmed screen after login. The new user profile seems to
> help
> it untill something is saved in it and it goes back like the other
> profiles.
> Any ideas with this one. Thanks in Advance Josh
>
> "Andre Da Costa [Extended64]" wrote:
>
>> Driver issue I suspect, have you tried using the native drivers that come
>> with Vista?
>> --
>> Andre
>> Extended64 | http://www.extended64.com
>> Blog | http://www.extended64.com/blogs/andre
>> http://spaces.msn.com/members/adacosta
>> "Josh" <(E-Mail Removed)> wrote in message
>> news:650CE242-750A-4320-90D1-(E-Mail Removed)...
>> > I'm using a HTPC that has a Radeon X600 video card. I have installed
>> > the
>> > most
>> > up to date drivers in it from the ATI site and I still have the same
>> > problem.
>> > My Screen is a Dell Projector 3400mp. When windows is starting up and
>> > when
>> > it
>> > is logging it the screen is normal. When it finishes logging it the
>> > screen
>> > will dim down very low. My cursor will stay bright and fine but all of
>> > windows is very dim in the back ground. The projector is hooked up
>> > through
>> > the DVI side of the card. If I shutdown windows and hook up a monitor
>> > to
>> > the
>> > VGA side it does fine. Windows runs fine but it is very very dim after
>> > windows loads. Any ideas?
>>
>>
>>

three different video cards and still same problem. Are you sure on your idea
that it is a video card. Also though it might be the system so I reinstalled
but installed x64 this time since my system can support x64 still same
problem with all three different video cards

"Andre Da Costa [Extended64]" wrote:

> I suspect you are seeing a driver issue here, the best recommendation is to
> report issue to ATI and use feedback tool on your desktop to make a report
> to Microsoft about issue.
> --
> --
> Andre
> Windows Connected | http://www.windowsconnected.com
> Extended64 | http://www.extended64.com
> Blog | http://www.extended64.com/blogs/andre
> http://spaces.msn.com/members/adacosta
>
> "Josh" <(E-Mail Removed)> wrote in message
> news:064AEFA1-1589-48DE-9957-(E-Mail Removed)...
> > Ok new devolpment.
> >
> > If I create a new user it will work fine for a few restarts and then it
> > will
> > go back to the dimmed screen after login. The new user profile seems to
> > help
> > it untill something is saved in it and it goes back like the other
> > profiles.
> > Any ideas with this one. Thanks in Advance Josh
> >
> > "Andre Da Costa [Extended64]" wrote:
> >
> >> Driver issue I suspect, have you tried using the native drivers that come
> >> with Vista?
> >> --
> >> Andre
> >> Extended64 | http://www.extended64.com
> >> Blog | http://www.extended64.com/blogs/andre
> >> http://spaces.msn.com/members/adacosta
> >> "Josh" <(E-Mail Removed)> wrote in message
> >> news:650CE242-750A-4320-90D1-(E-Mail Removed)...
> >> > I'm using a HTPC that has a Radeon X600 video card. I have installed
> >> > the
> >> > most
> >> > up to date drivers in it from the ATI site and I still have the same
> >> > problem.
> >> > My Screen is a Dell Projector 3400mp. When windows is starting up and
> >> > when
> >> > it
> >> > is logging it the screen is normal. When it finishes logging it the
> >> > screen
> >> > will dim down very low. My cursor will stay bright and fine but all of
> >> > windows is very dim in the back ground. The projector is hooked up
> >> > through
> >> > the DVI side of the card. If I shutdown windows and hook up a monitor
> >> > to
> >> > the
> >> > VGA side it does fine. Windows runs fine but it is very very dim after
> >> > windows loads. Any ideas?
> >>
> >>
> >>
>
>
>