I have a FujiFilm FinePix A201 camera, which I have
gotten to work under Windows XP before as a USB Digital
Camer. However I had to do a reinstall, and I was
reinstalling the driver and the battery went dead in the
driver instlal process and my lap top gave me a stop
error, now whenever I plug the camera in it tries to
reinstalll the driver and I get a stop error. The error
in my windows event manager under system shows the
following system error.

Error code 0000000a, parameter1 00000000, parameter2
00000002, parameter3 00000001, parameter4 804f50b0.

Tony Mattas said:

> I have a FujiFilm FinePix A201 camera, which I have
> gotten to work under Windows XP before as a USB Digital
> Camer. However I had to do a reinstall, and I was
> reinstalling the driver and the battery went dead in the
> driver instlal process and my lap top gave me a stop
> error, now whenever I plug the camera in it tries to
> reinstalll the driver and I get a stop error. The error
> in my windows event manager under system shows the
> following system error.
>
> Error code 0000000a, parameter1 00000000, parameter2
> 00000002, parameter3 00000001, parameter4 804f50b0.

Look at the Device Manager, under Control Panel|SYSTEM|HARDWARE tab|DEVICE
MGR. button

If there are "unknown devices" or colored entries that are inoperative,
delete them. Then follow Fuji's instructions for reinstalling the camera
drivers.

--
For most XP answers and tweaks... http://www.kellys-korner-xp.com/xp_abc.htm
http://dougknox.com http://aumha.org http://support.microsoft.com

The only unknown device that was shown at one time was an
unknown monitor, and I could only see that by using

DEVMGR_SHOW_NOTPREASENT_DEVICES=1 and then showing the
hidden devices. I removed that, uninstalled the camera
driver, rebooted, reinstalled and had the same problem.

>-----Original Message-----
>Tony Mattas said:
>
>> I have a FujiFilm FinePix A201 camera, which I have
>> gotten to work under Windows XP before as a USB
Digital
>> Camer. However I had to do a reinstall, and I was
>> reinstalling the driver and the battery went dead in
the
>> driver instlal process and my lap top gave me a stop
>> error, now whenever I plug the camera in it tries to
>> reinstalll the driver and I get a stop error. The
error
>> in my windows event manager under system shows the
>> following system error.
>>
>> Error code 0000000a, parameter1 00000000, parameter2
>> 00000002, parameter3 00000001, parameter4 804f50b0.
>
>Look at the Device Manager, under Control
Panel|SYSTEM|HARDWARE tab|DEVICE
>MGR. button
>
>If there are "unknown devices" or colored entries that
are inoperative,
>delete them. Then follow Fuji's instructions for
reinstalling the camera
>drivers.
>
>--
>For most XP answers and tweaks... http://www.kellys-
korner-xp.com/xp_abc.htm
> http://dougknox.com http://aumha.org
http://support.microsoft.com
>
>.
>