Hi,

We have an domain, and a workgroup.
The domain has 192.168.13.x as ip-range.
We have installed on a server (windows 2000) in the workgroup 2 nic's, one
in the 192.168.13.x range and one in the 192.168.15.x range.
We want to use the dhcp-server on this server to provide the 192.168.15.x
clients (this is only for imaging purpose).
When i start the the dhcp server i've got eventid 1052, that he found
another dhcp server on the 192.168.13.x domain and 1054 error and he shuts
down the services.
What can i do, so i can run the dhcp in the workgroup?

Use the DHCP Server that is already in use.

Don't create network segments if you don't have a LAN Router to run between
them.

Don't run two nics in a server

Add a Scope to the existing DHCP Server for the additional segment (No
Superscopes!)

Configure the LAN Router between the segments to forward DHCP Queries to the
DHCP Server.


--
Phillip Windell
www.wandtv.com

The views expressed, are my own and not those of my employer, or Microsoft,
or anyone else associated with me, including my cats.
-----------------------------------------------------


"Bert" <(E-Mail Removed)> wrote in message
news:02D4946E-D240-4BFB-A989-(E-Mail Removed)...
> Hi,
>
> We have an domain, and a workgroup.
> The domain has 192.168.13.x as ip-range.
> We have installed on a server (windows 2000) in the workgroup 2 nic's, one
> in the 192.168.13.x range and one in the 192.168.15.x range.
> We want to use the dhcp-server on this server to provide the 192.168.15.x
> clients (this is only for imaging purpose).
> When i start the the dhcp server i've got eventid 1052, that he found
> another dhcp server on the 192.168.13.x domain and 1054 error and he shuts
> down the services.
> What can i do, so i can run the dhcp in the workgroup?