How would I configure my DHCP server to give out address's
to remote VPN Clients

In fact, you configure that in RRAS. There you can set that RAS-clients
should listen to your server-IP and get an IP from your DHCP-server.

Marina

"Bruce" <(E-Mail Removed)> schreef in bericht
news:098001c3a304$501adbc0$(E-Mail Removed)...
> How would I configure my DHCP server to give out address's
> to remote VPN Clients

Hello Bruce,

There is no special configuration within DHCP to allow VPN clients to obtain
addresses.
The configuration is within RRAS as RRAS will be configured to obtain
addresses from DHCP.

Please look at the following article that talks about VPN Server
configuration.

323441 HOW TO: Install and Configure a Virtual Private Network Server in
http://support.microsoft.com/?id=323441

--
Regards,
Mohanchand Koduri [MSFT]

This posting is provided "AS IS" with no warranties, and confers no rights.
OR
If you wish to include a script sample in your post please add "Use of
included
script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm"

"Bruce" <(E-Mail Removed)> wrote in message
news:098001c3a304$501adbc0$(E-Mail Removed)...
> How would I configure my DHCP server to give out address's
> to remote VPN Clients