I want to determine whether I have a serial hard drive or an ATA hard drive
without opening up my computer, also I want to determine whether my computer
has an ATA card even if it does not have an ATA hard drive. In the "Device
Manager" all it has under disk drives is "ST320810A" and the properties did
not give me any more information. And under "IDE ATA/ATAPI controllers" it
has "Primary IDE Channel", "Secondary IDE Channel" and "SiS PCI IDE
Controller".

Can anyone help me?

Thanks in advance.

--
Kostatus
kostatus001 at ihug co nz

"ST" usually indicates a drive from Seagate (http://www.seagate.com/ ).

I don't see your stated model number there, however. Is the part number
correct?

You can try using the free version of SiSoft Sandra
(http://www.sisoftware.net/) to at least determine which mainboard is in
your system. The maker's web site may let you know whether your board has
SATA or not.

Good luck.

Bob Knowlden

Address may be altered to avoid spam. Replace nkbob with bobkn.

"Kostatus" <(E-Mail Removed)> wrote in message
news:Xns94118972B23FKostatus@203.109.252.31...
> I want to determine whether I have a serial hard drive or an ATA hard
drive
> without opening up my computer, also I want to determine whether my
computer
> has an ATA card even if it does not have an ATA hard drive. In the
"Device
> Manager" all it has under disk drives is "ST320810A" and the properties
did
> not give me any more information. And under "IDE ATA/ATAPI controllers"
it
> has "Primary IDE Channel", "Secondary IDE Channel" and "SiS PCI IDE
> Controller".
>
> Can anyone help me?
>
> Thanks in advance.
>
> --
> Kostatus
> kostatus001 at ihug co nz

Bel Arc Advisor www.belarc.com
or AIDA32 from http://www.aida32.hu/aida32.php


"Kostatus" <(E-Mail Removed)> wrote in
message news:Xns94118972B23FKostatus@203.109.252.31...
| I want to determine whether I have a serial hard drive or
an ATA hard drive
| without opening up my computer, also I want to determine
whether my computer
| has an ATA card even if it does not have an ATA hard
drive. In the "Device
| Manager" all it has under disk drives is "ST320810A" and
the properties did
| not give me any more information. And under "IDE
ATA/ATAPI controllers" it
| has "Primary IDE Channel", "Secondary IDE Channel" and
"SiS PCI IDE
| Controller".
|
| Can anyone help me?
|
| Thanks in advance.
|
| --
| Kostatus
| kostatus001 at ihug co nz

Is that drive number correct? Or might it be ST340810A? If the latter, then
your drive is a "40GB" Seagate standard parallel ATA-100 (UDMA5) S.M.A.R.T.
capable drive

Parameters (under XP) :
77545cyl
6heads
63sectors/track
512bytes/sector
LBA sectors 78165360


--
Reply to group
=================================================
Most learned here on nntp://news.mircosoft.com
Helsinki, Finland (remove _SPAM)
(translations from FI/SE not always accurate)
=================================================




"Kostatus" <(E-Mail Removed)> kirjoitti viestissä
news:Xns94118972B23FKostatus@203.109.252.31...
> I want to determine whether I have a serial hard drive or an ATA hard
drive
> without opening up my computer, also I want to determine whether my
computer
> has an ATA card even if it does not have an ATA hard drive. In the
"Device
> Manager" all it has under disk drives is "ST320810A" and the properties
did
> not give me any more information. And under "IDE ATA/ATAPI controllers"
it
> has "Primary IDE Channel", "Secondary IDE Channel" and "SiS PCI IDE
> Controller".
>
> Can anyone help me?
>
> Thanks in advance.
>
> --
> Kostatus
> kostatus001 at ihug co nz