Hi, There,
I'm run automation in Windows Server 2008, DEP blocked my program everytime
i run it.
I have another two machines with the same hardware, windows server 2008
installed. There is no problem when those automation program run at the other
two machines.

i tried to exclude my automation program from exclusion, but not allowed.
I also tried to turn on DEP for essential programs only, failed.

Anyone can help me?

Andrew - try the BCDEdit command

The /set command sets a boot entry option value in the boot configuration
data store. Use this command to configure specific boot entry elements, such
as kernel debugger settings, data execution protection (DEP) and processor
address extension (PAE) options, and to load alternate hardware abstraction
layer (HAL) and kernel files.



"Andrew" <(E-Mail Removed)> wrote in message
news:59479D71-A2E1-4C18-9E5A-(E-Mail Removed)...
> Hi, There,
> I'm run automation in Windows Server 2008, DEP blocked my program
> everytime
> i run it.
> I have another two machines with the same hardware, windows server 2008
> installed. There is no problem when those automation program run at the
> other
> two machines.
>
> i tried to exclude my automation program from exclusion, but not allowed.
> I also tried to turn on DEP for essential programs only, failed.
>
> Anyone can help me?