Hi all,
I feel this is annoying. After being sent to standby and the fan rest for 2
seconds, the Poweredge400sc automatically restart: everything else is
working, only the monitor was shutdown.
By moving the mouse a little bit or hit a key on the keyboard, the monitor
can be turned on, and it shows a log-on-enter-user-password screen...
That's on!
It only sleeps for 2 seconds then everything was back on: fan, CPU,
harddisk, etc.
What is the problem?
FYI, I have done the following debugging:
1. I downloaded a dumppro.exe, and did in command line:
dumppro admin minsleep=s3
2. I downloaded ATI Rage XL new drivers, so it does not prevent me from
going standby now...
3. I updated the Flash BIOS to version A09, I think it is the newest...
4. I set the NIC to be allowing remote wake-up on LAN.
5. I set in the BIOS the suspend mode to be S3, and the low power mode to be
off(so I can remotely wake it up on LAN from hibernation or off, but that's
another issue. I now want standby first,... sleep first, wakeup that's a
later issue...)
6. I set in the BIOS WAKE-UP-REMOTELY to be ON.
That's all I've tried...
Still not able to go standby fully...
What's wrong?
Thanks a lot!
|
Similar Threads
