I have a MSI km4m-v AMD board that I wanted to upgrade the memory. I
found a deal at Fry's for 2gb of PC3200. I thought I had 400fsb but
turns out the MB supports up to 333fsb. I was reading that my MB
supports memory at 2.5v. I was wondering if PC3200 w/400fsb will run
at this voltage or higher? Does it really matter since my system runs
max at 333fsb?

Thanks is advance for your assistance

Bassman wrote:
> I have a MSI km4m-v AMD board that I wanted to upgrade the memory. I
> found a deal at Fry's for 2gb of PC3200. I thought I had 400fsb but
> turns out the MB supports up to 333fsb. I was reading that my MB
> supports memory at 2.5v. I was wondering if PC3200 w/400fsb will run
> at this voltage or higher? Does it really matter since my system runs
> max at 333fsb?
>
> Thanks is advance for your assistance
>


It is absolutely essential that any new RAM module(s) be fully
compatible with both the motherboard and/or any other RAM module(s)
already in the system. Additionally, there are sometimes jumper
switches on older motherboards that need to be reset for new RAM
configurations. Consult your motherboard's manual or the
manufacturer's web site for specific instructions and compatibility
requirements.

If you cannot lay your hands upon the computer's manual and the
manufacturer doesn't provide a support web site, you can use these
utilities to help determine the correct type of RAM needed:

SiSoft's Sandra
http://www.sisoftware.co.uk/index.ph...are_dl&lang=en

Belarc Advisor
http://www.belarc.com/free_download.html

Unlimited Possibilities' AIDA32
http://forum.aumha.org/overflow/aida32.zip

Also, Crucial Memory's web site (www.crucial.com) has a database
to help to find the right RAM for your specific make and model
computer and/or motherboard. (Incidentally, Crucial is the only company
from which I ever buy RAM. I've never been disappointed.)



--

Bruce Chambers

Help us help you:
http://dts-l.org/goodpost.htm
http://www.catb.org/~esr/faqs/smart-questions.html

They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. -Benjamin Franklin

Many people would rather die than think; in fact, most do. -Bertrand Russell

many times DDR 400 will run at 333 in a system that supports only 333.
it is always best to use RAM that is matched (all modules the same
speed/latency ratings) and the proper speed for your system.
I have used it, but don't recommend it.

"Bruce Chambers" <(E-Mail Removed)3t> wrote in message
news:(E-Mail Removed)...
> Bassman wrote:
>> I have a MSI km4m-v AMD board that I wanted to upgrade the memory. I
>> found a deal at Fry's for 2gb of PC3200. I thought I had 400fsb but
>> turns out the MB supports up to 333fsb. I was reading that my MB
>> supports memory at 2.5v. I was wondering if PC3200 w/400fsb will run
>> at this voltage or higher? Does it really matter since my system runs
>> max at 333fsb?
>>
>> Thanks is advance for your assistance
>>
>
>
> It is absolutely essential that any new RAM module(s) be fully
> compatible with both the motherboard and/or any other RAM module(s)
> already in the system. Additionally, there are sometimes jumper
> switches on older motherboards that need to be reset for new RAM
> configurations. Consult your motherboard's manual or the
> manufacturer's web site for specific instructions and compatibility
> requirements.
>
> If you cannot lay your hands upon the computer's manual and the
> manufacturer doesn't provide a support web site, you can use these
> utilities to help determine the correct type of RAM needed:
>
> SiSoft's Sandra
> http://www.sisoftware.co.uk/index.ph...are_dl&lang=en
>
> Belarc Advisor
> http://www.belarc.com/free_download.html
>
> Unlimited Possibilities' AIDA32
> http://forum.aumha.org/overflow/aida32.zip
>
> Also, Crucial Memory's web site (www.crucial.com) has a database
> to help to find the right RAM for your specific make and model
> computer and/or motherboard. (Incidentally, Crucial is the only company
> from which I ever buy RAM. I've never been disappointed.)
>
>
>
> --
>
> Bruce Chambers
>
> Help us help you:
> http://dts-l.org/goodpost.htm
> http://www.catb.org/~esr/faqs/smart-questions.html
>
> They that can give up essential liberty to obtain a little temporary
> safety deserve neither liberty nor safety. -Benjamin Franklin
>
> Many people would rather die than think; in fact, most do. -Bertrand
> Russell