I try to share a database in Business Contact Manager, and when I get to the
screen to Grant Database Access, I click on finish, but all I get is an error
that says:
An error occurred while applying changes. Your changes have not been
applied successfully. I am on Small Business Server 2003 Network, but I as
far as I know Business Contact Manager Update Service Pack 2 is compatible
with Small Business Server 2003. So, why the error on any one of the
machines I try. It seems to want to share just fine on my home system which
is not attached to a domain. I have Domain Admin Rights.

Is the windows firewall service set to started in servcies.msc ?Can you
check if the same occurs with a blank database
--
With Regards

Raul Thomas
"mrmikefm" <(E-Mail Removed)> wrote in message
news:E9DAA607-C0C1-41B2-8BEE-(E-Mail Removed)...
>I try to share a database in Business Contact Manager, and when I get to
>the
> screen to Grant Database Access, I click on finish, but all I get is an
> error
> that says:
> An error occurred while applying changes. Your changes have not been
> applied successfully. I am on Small Business Server 2003 Network, but I
> as
> far as I know Business Contact Manager Update Service Pack 2 is compatible
> with Small Business Server 2003. So, why the error on any one of the
> machines I try. It seems to want to share just fine on my home system
> which
> is not attached to a domain. I have Domain Admin Rights.

The firewall is turned off, and it is a new database, and I stil get the
same response
"Raul" wrote:

> Is the windows firewall service set to started in servcies.msc ?Can you
> check if the same occurs with a blank database
> --
> With Regards
>
> Raul Thomas
> "mrmikefm" <(E-Mail Removed)> wrote in message
> news:E9DAA607-C0C1-41B2-8BEE-(E-Mail Removed)...
> >I try to share a database in Business Contact Manager, and when I get to
> >the
> > screen to Grant Database Access, I click on finish, but all I get is an
> > error
> > that says:
> > An error occurred while applying changes. Your changes have not been
> > applied successfully. I am on Small Business Server 2003 Network, but I
> > as
> > far as I know Business Contact Manager Update Service Pack 2 is compatible
> > with Small Business Server 2003. So, why the error on any one of the
> > machines I try. It seems to want to share just fine on my home system
> > which
> > is not attached to a domain. I have Domain Admin Rights.
>
>
>

You would have to enable the windows firewall only them will the ports that
BCM be configured ,once sharing is enabled you can disable the same

With Regards

Raul Thomas
"mrmikefm" <(E-Mail Removed)> wrote in message
news:66611107-712B-40E5-809A-(E-Mail Removed)...
>
> The firewall is turned off, and it is a new database, and I stil get the
> same response
> "Raul" wrote:
>
>> Is the windows firewall service set to started in servcies.msc ?Can you
>> check if the same occurs with a blank database
>> --
>> With Regards
>>
>> Raul Thomas
>> "mrmikefm" <(E-Mail Removed)> wrote in message
>> news:E9DAA607-C0C1-41B2-8BEE-(E-Mail Removed)...
>> >I try to share a database in Business Contact Manager, and when I get to
>> >the
>> > screen to Grant Database Access, I click on finish, but all I get is an
>> > error
>> > that says:
>> > An error occurred while applying changes. Your changes have not been
>> > applied successfully. I am on Small Business Server 2003 Network, but
>> > I
>> > as
>> > far as I know Business Contact Manager Update Service Pack 2 is
>> > compatible
>> > with Small Business Server 2003. So, why the error on any one of the
>> > machines I try. It seems to want to share just fine on my home system
>> > which
>> > is not attached to a domain. I have Domain Admin Rights.
>>
>>
>>

well with the firewall turned off, the porst should be wide open, right?
That's what I have setup.

"Raul" wrote:

> You would have to enable the windows firewall only them will the ports that
> BCM be configured ,once sharing is enabled you can disable the same
>
> With Regards
>
> Raul Thomas
> "mrmikefm" <(E-Mail Removed)> wrote in message
> news:66611107-712B-40E5-809A-(E-Mail Removed)...
> >
> > The firewall is turned off, and it is a new database, and I stil get the
> > same response
> > "Raul" wrote:
> >
> >> Is the windows firewall service set to started in servcies.msc ?Can you
> >> check if the same occurs with a blank database
> >> --
> >> With Regards
> >>
> >> Raul Thomas
> >> "mrmikefm" <(E-Mail Removed)> wrote in message
> >> news:E9DAA607-C0C1-41B2-8BEE-(E-Mail Removed)...
> >> >I try to share a database in Business Contact Manager, and when I get to
> >> >the
> >> > screen to Grant Database Access, I click on finish, but all I get is an
> >> > error
> >> > that says:
> >> > An error occurred while applying changes. Your changes have not been
> >> > applied successfully. I am on Small Business Server 2003 Network, but
> >> > I
> >> > as
> >> > far as I know Business Contact Manager Update Service Pack 2 is
> >> > compatible
> >> > with Small Business Server 2003. So, why the error on any one of the
> >> > machines I try. It seems to want to share just fine on my home system
> >> > which
> >> > is not attached to a domain. I have Domain Admin Rights.
> >>
> >>
> >>
>
>
>

I enabled windows firewall, made an exception for the program as described in
the HELP and SUPPORT information for Business Contact Manager, and I still
get the same error when I click the finish button in the setup wizard: "An
error occurred while applying changes. Your changes have not been applied
successfully."

"Raul" wrote:

> You would have to enable the windows firewall only them will the ports that
> BCM be configured ,once sharing is enabled you can disable the same
>
> With Regards
>
> Raul Thomas
> "mrmikefm" <(E-Mail Removed)> wrote in message
> news:66611107-712B-40E5-809A-(E-Mail Removed)...
> >
> > The firewall is turned off, and it is a new database, and I stil get the
> > same response
> > "Raul" wrote:
> >
> >> Is the windows firewall service set to started in servcies.msc ?Can you
> >> check if the same occurs with a blank database
> >> --
> >> With Regards
> >>
> >> Raul Thomas
> >> "mrmikefm" <(E-Mail Removed)> wrote in message
> >> news:E9DAA607-C0C1-41B2-8BEE-(E-Mail Removed)...
> >> >I try to share a database in Business Contact Manager, and when I get to
> >> >the
> >> > screen to Grant Database Access, I click on finish, but all I get is an
> >> > error
> >> > that says:
> >> > An error occurred while applying changes. Your changes have not been
> >> > applied successfully. I am on Small Business Server 2003 Network, but
> >> > I
> >> > as
> >> > far as I know Business Contact Manager Update Service Pack 2 is
> >> > compatible
> >> > with Small Business Server 2003. So, why the error on any one of the
> >> > machines I try. It seems to want to share just fine on my home system
> >> > which
> >> > is not attached to a domain. I have Domain Admin Rights.
> >>
> >>
> >>
>
>
>