"chazm" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
| On Mon, 01 Sep 2003 21:50:42 GMT, "JAD" <(E-Mail Removed)> wrote:
|
| >what in the list then is showing the usage?
| >And now you are mentioning temps. is it a temp problem or a cpu usage
problem?
| >
| >"chazm" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
| >> On Mon, 01 Sep 2003 18:45:40 GMT, "JAD" <(E-Mail Removed)> wrote:
| >>
| >> None that I know of unless my kids did it. I also scan regularly with
| >> Ad-Aware and SpyBotSD and keep all the clutter out of the system.
| >> WinTop doesn't show anything that Niersoft Taskmanager does.
| >>
| >> CPU starts at a cool 30 degrees celsius and works its way up to 58
| >> degrees after about 15 to 25 min. Thats when I start getting the
| >> BSOD's. No, MSBlaster is not on the system.
| >>
|
| >> >> > Any help or insight would be greatly appreciated. Thanks.
| >> >>
|
| All the usages are normal, nothing shows to be using excessive cycles
| of the CPU. MotherBoardMonitor shows the CPU use as 100% without a
| break. WINTOP shows the IDLE process to be 98 to 99%, but this is the
| same on other computers, so appears to be normal. WINTop also doesn't
| show any processes using excessive CPU cycles.
|
| As far as temps go, before CPU usge was shown as 100%, the temperature
| of the CPU ran 10 degrees cooler when CPU usage was within a normal
| range. Because of the rise in temp, I'm getting the weird BSOD's. They
| start when the CPU temp hits 57 degrees or 58 degrees celsius.
The CPU "Idle Process" means just that, the CPU is IDLE, doing nothing,
resting, nada. Watch the temperature WHILE the CPU Idle Process is at a
very high percentage and see if temp still increases.
If the temp is high under this condition maybe one of your fans has stopped
working? Is the CPU heat sink and/or fan all plugged up with dust bunnies?
Is the fan rotating up around 4000 RPM? Try removing and reinstalling the
CPU heatsink using proper installation techniques.
Maybe something has gone wrong with MTM and it's giving false readings.
Uninstall and reinstall it.
|