I have my Word 2003 template with macros and shortcuts for them. I make Word
2007 .ditm template base on Word 2003 template as says Help. But:
1. there is no any macro in new templates. I use organize for adding macros
2. I lost all my shortcuts. I must assign them again (labour-intensive).
Note when I returned to reassign dialoge all my shortcuts do not showed but
work properly.

Do you know a sliple way to transform all your template settings?

If this is a document template, leave it alone. Word dot format templates
work in Word 2007 albeit.some macro functions will no longer work.
If you want to convert it to dotm format, then open the template in Word
2007 and save as DOTM format.
Whether the macros will work in Word 2007 is another issue entirely.

--
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>
Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>


Sevilho wrote:
> I have my Word 2003 template with macros and shortcuts for them. I
> make Word 2007 .ditm template base on Word 2003 template as says
> Help. But:
> 1. there is no any macro in new templates. I use organize for adding
> macros
> 2. I lost all my shortcuts. I must assign them again
> (labour-intensive). Note when I returned to reassign dialoge all my
> shortcuts do not showed but work properly.
>
> Do you know a sliple way to transform all your template settings?

French is not included by default with a Swedish Office installation. I
belive you need the Microsoft Office 2003 Proofing Tools, but I don't know
if it's still available, given the fact that Office 2007 is the current
version.

--
Stefan Blom
Microsoft Word MVP




"Sevilho" wrote:

> I have my Word 2003 template with macros and shortcuts for them. I make Word
> 2007 .ditm template base on Word 2003 template as says Help. But:
> 1. there is no any macro in new templates. I use organize for adding macros
> 2. I lost all my shortcuts. I must assign them again (labour-intensive).
> Note when I returned to reassign dialoge all my shortcuts do not showed but
> work properly.
>
> Do you know a sliple way to transform all your template settings?

Sorry, I posted my reply to the wrong thread.

--
Stefan Blom
Microsoft Word MVP




"Stefan Blom" wrote:

> French is not included by default with a Swedish Office installation. I
> belive you need the Microsoft Office 2003 Proofing Tools, but I don't know
> if it's still available, given the fact that Office 2007 is the current
> version.
>
> --
> Stefan Blom
> Microsoft Word MVP
>
>
>
>
> "Sevilho" wrote:
>
> > I have my Word 2003 template with macros and shortcuts for them. I make Word
> > 2007 .ditm template base on Word 2003 template as says Help. But:
> > 1. there is no any macro in new templates. I use organize for adding macros
> > 2. I lost all my shortcuts. I must assign them again (labour-intensive).
> > Note when I returned to reassign dialoge all my shortcuts do not showed but
> > work properly.
> >
> > Do you know a sliple way to transform all your template settings?

MVP Graham Mayor posted this reply via NNTP (not yet visible in the Microsoft
web interface):

********
If this is a document template, leave it alone. Word dot format templates
work in Word 2007 albeit.some macro functions will no longer work.
If you want to convert it to dotm format, then open the template in Word
2007 and save as DOTM format.
Whether the macros will work in Word 2007 is another issue entirely.
********

--
Stefan Blom
Microsoft Word MVP




"Sevilho" wrote:

> I have my Word 2003 template with macros and shortcuts for them. I make Word
> 2007 .ditm template base on Word 2003 template as says Help. But:
> 1. there is no any macro in new templates. I use organize for adding macros
> 2. I lost all my shortcuts. I must assign them again (labour-intensive).
> Note when I returned to reassign dialoge all my shortcuts do not showed but
> work properly.
>
> Do you know a sliple way to transform all your template settings?

stefan can you help me.....posted this in word 2003 post errors....but no
answer:
this is the error message..AppName: winword.exe AppVer: 10.0.6854.0 ModName:
winword.exe

ModVer: 10.0.6854.0 Offset: 005d178a

...every time i close word and outlook 2003 this message comes up. also word
is slow to boot and very slow to exit...then this message appears. opens and
closes fine in safe mode. changing to non hp printer did not help either. i
do have windows live. however i had office 2002 with the same problem, so i
upgraded to 2003 thinking that would help....it did not. thank you for your
time and consideration
i still have this problem: as said in first post:"afworks"
<(E-Mail Removed)> wrote in message
news:E41772B3-BAAA-4D07-9D89-(E-Mail Removed)...
> this is the error message..AppName: winword.exe AppVer: 10.0.6854.0
> ModName:
> winword.exe
>
> ModVer: 10.0.6854.0 Offset: 005d178a
>
> ..every time i close word and outlook 2003 this message comes up. also
> word
> is slow to boot and very slow to exit...then this message appears. opens
> and
> closes fine in safe mode. changing to non hp printer did not help either.
> i
> do have windows live. however i had office 2002 with the same problem, so
> i
> upgraded to 2003 thinking that would help....it did not. thank you for
> your
> time and consideration
ALSO I AM USING WINDOWS XP-----!!!!!!! WORD IS ALSO SLOW TO OPEN AND IN
TRYING TO CLOSE IT....IT TAKES ABOUT TWO MINS......AND AGAIN THE ABOVE ERROR
MESSAGE APPEARS......CAN NOT USE FIX IT---THAT IS FOR VISA AND WINDOWS
7---DOES NOT APPLY.....HELP!!!!!!----ALAN

"Stefan Blom" wrote:

> MVP Graham Mayor posted this reply via NNTP (not yet visible in the Microsoft
> web interface):
>
> ********
> If this is a document template, leave it alone. Word dot format templates
> work in Word 2007 albeit.some macro functions will no longer work.
> If you want to convert it to dotm format, then open the template in Word
> 2007 and save as DOTM format.
> Whether the macros will work in Word 2007 is another issue entirely.
> ********
>
> --
> Stefan Blom
> Microsoft Word MVP
>
>
>
>
> "Sevilho" wrote:
>
> > I have my Word 2003 template with macros and shortcuts for them. I make Word
> > 2007 .ditm template base on Word 2003 template as says Help. But:
> > 1. there is no any macro in new templates. I use organize for adding macros
> > 2. I lost all my shortcuts. I must assign them again (labour-intensive).
> > Note when I returned to reassign dialoge all my shortcuts do not showed but
> > work properly.
> >
> > Do you know a sliple way to transform all your template settings?

If you are saying that Word runs properly when it is started in Safe mode,
that indicates a problem with an add-in, with the Normal template or with the
registry. See http://word.mvps.org/FAQs/AppErrors/...artingWord.htm.

--
Stefan Blom
Microsoft Word MVP




"afworks" wrote:

> stefan can you help me.....posted this in word 2003 post errors....but no
> answer:
> this is the error message..AppName: winword.exe AppVer: 10.0.6854.0 ModName:
> winword.exe
>
> ModVer: 10.0.6854.0 Offset: 005d178a
>
> ..every time i close word and outlook 2003 this message comes up. also word
> is slow to boot and very slow to exit...then this message appears. opens and
> closes fine in safe mode. changing to non hp printer did not help either. i
> do have windows live. however i had office 2002 with the same problem, so i
> upgraded to 2003 thinking that would help....it did not. thank you for your
> time and consideration
> i still have this problem: as said in first post:"afworks"
> <(E-Mail Removed)> wrote in message
> news:E41772B3-BAAA-4D07-9D89-(E-Mail Removed)...
> > this is the error message..AppName: winword.exe AppVer: 10.0.6854.0
> > ModName:
> > winword.exe
> >
> > ModVer: 10.0.6854.0 Offset: 005d178a
> >
> > ..every time i close word and outlook 2003 this message comes up. also
> > word
> > is slow to boot and very slow to exit...then this message appears. opens
> > and
> > closes fine in safe mode. changing to non hp printer did not help either.
> > i
> > do have windows live. however i had office 2002 with the same problem, so
> > i
> > upgraded to 2003 thinking that would help....it did not. thank you for
> > your
> > time and consideration
> ALSO I AM USING WINDOWS XP-----!!!!!!! WORD IS ALSO SLOW TO OPEN AND IN
> TRYING TO CLOSE IT....IT TAKES ABOUT TWO MINS......AND AGAIN THE ABOVE ERROR
> MESSAGE APPEARS......CAN NOT USE FIX IT---THAT IS FOR VISA AND WINDOWS
> 7---DOES NOT APPLY.....HELP!!!!!!----ALAN
>
> "Stefan Blom" wrote:
>
> > MVP Graham Mayor posted this reply via NNTP (not yet visible in the Microsoft
> > web interface):
> >
> > ********
> > If this is a document template, leave it alone. Word dot format templates
> > work in Word 2007 albeit.some macro functions will no longer work.
> > If you want to convert it to dotm format, then open the template in Word
> > 2007 and save as DOTM format.
> > Whether the macros will work in Word 2007 is another issue entirely.
> > ********
> >
> > --
> > Stefan Blom
> > Microsoft Word MVP
> >
> >
> >
> >
> > "Sevilho" wrote:
> >
> > > I have my Word 2003 template with macros and shortcuts for them. I make Word
> > > 2007 .ditm template base on Word 2003 template as says Help. But:
> > > 1. there is no any macro in new templates. I use organize for adding macros
> > > 2. I lost all my shortcuts. I must assign them again (labour-intensive).
> > > Note when I returned to reassign dialoge all my shortcuts do not showed but
> > > work properly.
> > >
> > > Do you know a sliple way to transform all your template settings?