I used a continuous inkfeed system for several years on my Epson 1200;
eventually the sponge in the cartridge disintegrated and started
blocking nozzles. I got the thing off, put in normal Epson
cartridges, and it seems to be printing okay.

Now I'm thinking of

A) Replacing the cartridges in my CIS, putting a new batch of
Generations pigmented ink in, and continuing to use the 1200. For
another 2-3 years, until the sponge disintegrates again. And I think
the ink pads are getting full, and it's spotting the borders of the
pages now and again.

B) Buying a 2200 and using OEM Ultrachrome inks.

C) Buying an R800 and using OEM Ultrachrome inks. I have actually
gone past 8.3 inches wide pretty seldom, and I can easily send such
things to a photo lab these days. And I rather like *glossy* photos.

D) Just discovered the inkrepublic.com CIS, which isn't
sponge-based. I could put one on a 1280, say, using Generations
pigmented inks, and have a rather nice long-life art printing solution
with much lower operating costs than a 2200. Anybody have any
experience with this? Any reason I should get anything but a 1280
with it, if I'm buying new?

I view printing at home as like having a darkroom -- the cycle of
examining what I've done and improving it goes much faster than when
it has to go through a lab and I pay out money. Yeah, I know it's
costing me money at home, too; quite a lot, at least without a CIS.

I may be having the same problem on an 1160 with quadtone B&W, too.
Bah, humbug; and I really should tackle this before the clogs
*completely* harden.
--
David Dyer-Bennet, <mailto:dd-(E-Mail Removed)>, <http://www.dd-b.net/dd-b/>
RKBA: <http://noguns-nomoney.com/> <http://www.dd-b.net/carry/>
Pics: <http://dd-b.lighthunters.net/> <http://www.dd-b.net/dd-b/SnapshotAlbum/>
Dragaera/Steven Brust: <http://dragaera.info/>

David Dyer-Bennet wrote:
> I used a continuous inkfeed system for several years on my Epson
1200;
> eventually the sponge in the cartridge disintegrated and started
> blocking nozzles. I got the thing off, put in normal Epson
> cartridges, and it seems to be printing okay.
>
> Now I'm thinking of
>
> A) Replacing the cartridges in my CIS, putting a new batch of
> Generations pigmented ink in, and continuing to use the 1200. For
> another 2-3 years, until the sponge disintegrates again. And I think
> the ink pads are getting full, and it's spotting the borders of the
> pages now and again.
>
> B) Buying a 2200 and using OEM Ultrachrome inks.
>
> C) Buying an R800 and using OEM Ultrachrome inks. I have actually
> gone past 8.3 inches wide pretty seldom, and I can easily send such
> things to a photo lab these days. And I rather like *glossy* photos.

>
> D) Just discovered the inkrepublic.com CIS, which isn't
> sponge-based. I could put one on a 1280, say, using Generations
> pigmented inks, and have a rather nice long-life art printing
solution
> with much lower operating costs than a 2200. Anybody have any
> experience with this? Any reason I should get anything but a 1280
> with it, if I'm buying new?
>
> I view printing at home as like having a darkroom -- the cycle of
> examining what I've done and improving it goes much faster than when
> it has to go through a lab and I pay out money. Yeah, I know it's
> costing me money at home, too; quite a lot, at least without a CIS.
>
> I may be having the same problem on an 1160 with quadtone B&W, too.
> Bah, humbug; and I really should tackle this before the clogs
> *completely* harden.
> --
> David Dyer-Bennet, <mailto:dd-(E-Mail Removed)>,
<http://www.dd-b.net/dd-b/>
> RKBA: <http://noguns-nomoney.com/> <http://www.dd-b.net/carry/>
> Pics: <http://dd-b.lighthunters.net/>
<http://www.dd-b.net/dd-b/SnapshotAlbum/>
> Dragaera/Steven Brust: <http://dragaera.info/>

Was there something you wished to add to this posting, or are you just
reposting it in its entirety because it mentions the company it appears
you are affiliated with?

Art

DaisyCutter wrote:

> David Dyer-Bennet wrote:
>
>>I used a continuous inkfeed system for several years on my Epson
>
> 1200;
>
>>eventually the sponge in the cartridge disintegrated and started
>>blocking nozzles. I got the thing off, put in normal Epson
>>cartridges, and it seems to be printing okay.
>>
>>Now I'm thinking of
>>

<cut>