PC Review


Reply
Thread Tools Rate Thread

Connection Faliure to Update Server

 
 
Master
Guest
Posts: n/a
 
      7th Jan 2005
I installed the SW and voilá... fast and easy 2 use.

BUT...

When I tried to connect to Update Server, "Connection
Faliure" message appears...

since it's Beta SW...

WHAT'S HAPPENNIG?

ALL HELP WELLCOME
 
Reply With Quote
 
 
 
 
Bill Sanderson
Guest
Posts: n/a
 
      7th Jan 2005
I've seen several folks with this issue and seen it first hand myself.

Try again in a few hours, is my suggestion.

"Master" <(E-Mail Removed)> wrote in message
news:11ac01c4f4ff$32117820$(E-Mail Removed)...
I installed the SW and voilá... fast and easy 2 use.

BUT...

When I tried to connect to Update Server, "Connection
Faliure" message appears...

since it's Beta SW...

WHAT'S HAPPENNIG?

ALL HELP WELLCOME


 
Reply With Quote
 
Jon G
Guest
Posts: n/a
 
      7th Jan 2005
Update server seems to be experiencing some problems. Hang tight and try a
bit later

--
- Jon G
(E-Mail Removed)

"Master" <(E-Mail Removed)> wrote in message
news:11ac01c4f4ff$32117820$(E-Mail Removed)...
I installed the SW and voilá... fast and easy 2 use.

BUT...

When I tried to connect to Update Server, "Connection
Faliure" message appears...

since it's Beta SW...

WHAT'S HAPPENNIG?

ALL HELP WELLCOME


 
Reply With Quote
 
Guest
Posts: n/a
 
      7th Jan 2005
So if I'm using outlook express and just sorted getting a
failure message when trying to get email... Error code
0x800CCC0E... I should just hang tight for a couple hours
and this might fix itself? Internet is running fine...
just email... Help! I'm ****ed!
>-----Original Message-----
>I've seen several folks with this issue and seen it

first hand myself.
>
>Try again in a few hours, is my suggestion.
>
>"Master" <(E-Mail Removed)> wrote

in message
>news:11ac01c4f4ff$32117820$(E-Mail Removed)...
>I installed the SW and voilá... fast and easy 2 use.
>
>BUT...
>
>When I tried to connect to Update Server, "Connection
>Faliure" message appears...
>
>since it's Beta SW...
>
>WHAT'S HAPPENNIG?
>
>ALL HELP WELLCOME
>
>
>.
>

 
Reply With Quote
 
Bill Sanderson
Guest
Posts: n/a
 
      7th Jan 2005
I've seen that myself today.

If you haven't changed configuration and the Internet connection is up, that
means you can't reach the server, I believe.

So--connectivity. Could be the server, or anything between your chair and
the server--lots of ground to cover, probably.

Maybe it is time to look at the Internet weather/traffic report sites and
see what is happening or not happening.

Don't see anything obvious. My email problem was definitely
configuration--good luck!

<(E-Mail Removed)> wrote in message
news:182f01c4f508$3e903c40$(E-Mail Removed)...
So if I'm using outlook express and just sorted getting a
failure message when trying to get email... Error code
0x800CCC0E... I should just hang tight for a couple hours
and this might fix itself? Internet is running fine...
just email... Help! I'm ****ed!
>-----Original Message-----
>I've seen several folks with this issue and seen it

first hand myself.
>
>Try again in a few hours, is my suggestion.
>
>"Master" <(E-Mail Removed)> wrote

in message
>news:11ac01c4f4ff$32117820$(E-Mail Removed)...
>I installed the SW and voilá... fast and easy 2 use.
>
>BUT...
>
>When I tried to connect to Update Server, "Connection
>Faliure" message appears...
>
>since it's Beta SW...
>
>WHAT'S HAPPENNIG?
>
>ALL HELP WELLCOME
>
>
>.
>



 
Reply With Quote
 
Frank Saunders, MS-MVP IE/OE
Guest
Posts: n/a
 
      9th Jan 2005
<(E-Mail Removed)> wrote in message
news:182f01c4f508$3e903c40$(E-Mail Removed)
> So if I'm using outlook express and just sorted getting a
> failure message when trying to get email... Error code
> 0x800CCC0E... I should just hang tight for a couple hours
> and this might fix itself? Internet is running fine...
> just email... Help! I'm ****ed!
>> -----Original Message-----
>> I've seen several folks with this issue and seen it first hand
>> myself.
>>
>> Try again in a few hours, is my suggestion.
>>
>> "Master" <(E-Mail Removed)> wrote in message
>> news:11ac01c4f4ff$32117820$(E-Mail Removed)...
>> I installed the SW and voilá... fast and easy 2 use.
>>
>> BUT...
>>
>> When I tried to connect to Update Server, "Connection
>> Faliure" message appears...
>>
>> since it's Beta SW...
>>
>> WHAT'S HAPPENNIG?
>>
>> ALL HELP WELLCOME
>>
>>
>> .


Full error messages help.

1) Error 0x800ccc0e, Socket Err 10061 (Outlook or Outlook Express &
Exchange)
http://support.microsoft.com/kb/191687

2) Turn off email scanning in your anti-virus. It provides no added
protection.

The Other E-Mail Threat: File Corruption in Outlook Express
Published: November 18, 2004
By Tom Koch
http://www.microsoft.com/windows/IE/...orruption.mspx

Email scanning slows down Sending and Receiving, sometimes enough that OE
times out. Since some of the received messages have large (often virus)
attachments, which exasperates the problem.
Some Comcast users have found it necessary to totally uninstall Norton and
switch to the free AVG with mail scanning off. Norton invented email
scanning and here's what they say:

"Disabling Email Scanning does not leave you unprotected against viruses
that
are distributed as email attachments. Norton AntiVirus Auto-Protect scans
incoming files as they are saved to your hard drive, including email and
email attachments. Email Scanning is just another layer on top of this. To
make sure that Auto-Protect is providing the maximum protection, keep
Auto-Protect enabled and run LiveUpdate regularly to ensure that you have
the most recent virus definitions."
http://service1.symantec.com/SUPPORT...256c7500723cf0

"...your computer is protected if Auto-Protect is enabled. Auto-Protect
scans any incoming files, including email attachments, when the files are
saved to your hard drive."
http://service1.symantec.com/SUPPORT...01100907323806

"NAV provides multiple layers of protection. Email scanning is just one of
those layers. Even if you are not running Email Scanning, your computer is
protected against viruses that are distributed as email attachments by NAV
Auto-Protect. Auto-Protect will scan any incoming files, including email
attachments, as they are saved to your hard drive. To make sure that
Auto-Protect is providing the maximum protection, keep Auto-Protect enabled
and run LiveUpdate regularly to ensure that you have the most recent virus
definitions."
http://service1.symantec.com/SUPPORT...rc=bar_sch_nam

See also
http://help.expedient.com/mailnews/n...ntivirus.shtml

So Symantec used to say this often and clearly. The newer stuff doesn't
have the statement included as it was considered an embarrassment. If you
know anyone who programs for Norton try to get them to talk about it.

--
Frank Saunders, MS-MVP, IE/OE
Please respond in Newsgroup only. Do not send email
http://www.fjsmjs.com
Protect your PC
http://www.microsoft.com./athome/sec...t/default.aspx


 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Windows Update loses connection with server Conan Kelly Windows XP Performance 1 25th Oct 2006 11:33 AM
NORTON UPDATE DISABLES OUTLOOK CONNECTION TO SERVER =?Utf-8?B?UEVMSUNBTg==?= Microsoft Outlook Discussion 3 11th Jan 2006 04:35 PM
Remote Access Connection Manager faliure on win2kPro =?Utf-8?B?QW5pdGEgUm9oYW5p?= Microsoft Windows 2000 RAS Routing 3 11th Aug 2004 01:03 AM
XP Client connection to Win2000 Server Problem (update) msenquiry Microsoft Windows 2000 Networking 0 19th May 2004 04:01 PM
Extremely Connection to Win 2K Server after XP Update Mike Baker Windows XP Networking 0 27th Oct 2003 07:53 PM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 05:14 PM.