Connecting to LocalHost using PocketPc Emulator ( TO : Christo)

Hi Christo

Sorry, but i have made all what you have said BUT did not
work !!

Is necessary to do more thinks ?

Please, tell me what i have to check and all settings i
have to put...
Please help me on this...
Thanks for all friend

Note: Perhaups this helps... I also have tried to put
LoopBack (Sharing
enable) but i recivied this error:

An error occured while Internet connectiong sharing was
being enabled.
Internet connection sharing cannot be enable. The Lan
connection selected
as the private network is either not present, or is
disconnected from the
network. Please ensure that the LAN adapter is connected
before
enabling Internet Connection Sharing

I am trying everythink BUT nothink work

Please help me friend
Thanks!

Best regards,
Ricardo Figueira

------------------------------
Subject: Re: Connecting to LocalHost using PocketPc
Emulator
From: "Christos Chorattides" <(E-Mail Removed)>
Sent: 8/29/2003
3:36:03 AM

First of all, emulator and laptop must be configured on
the same
network. If your laptops IP is 169.254.25.129, then you
must configure
the DC21X4 Ethernet Driver to an address like 169.254.25.
[1-255] eg 125.

Then if your laptop's ethernet card is connected to a
network disable
loopback. Try from pocket explorer to get a page on your
laptop's IIS
like this //169.254.25.129/mypage.htm .It must work.

If the ethernet is disconnected you need to install and
enable loopback.
Configure loopback's TCP in a similar address like
169.254.25.121.

Remember using Lan Card AND loopback together may cause
problems to your
access to the network when connected.

Finally the issue about being able to ping using the
computer name and
not using the ip adress is something that puzzles me too.
(YES, it
happens with the pocket emulator too). I have posted a
question to this
forum and expecting some reply.

*** Sent via Developersdex http://www.developersdex.com ***
Don't just participate in USENET...get rewarded for it!