Hi guys;
i have a smart device application in Windows CE 4.2 device, when i
used winXP, i have connected and deploy app from visual stuio by using
activesync connection.

Last week i installed the windows7 on my machine and it didn't
recognize the my device (casio dt-x10), i installed a XP mode (aka
Virtual PC) and installed the driver on XP mode and conected the my
device via activesync (over virtual xp)

But how can i deploy (for debugging) the application with visual stuio
over activesync (running on xp mode)

http://msdn.microsoft.com/en-us/library/ms228708.aspx

http://community.opennetcf.com/artic...ctivesync.aspx

Paul T.

"tenkyu" wrote:

> Hi guys;
> i have a smart device application in Windows CE 4.2 device, when i
> used winXP, i have connected and deploy app from visual stuio by using
> activesync connection.
>
> Last week i installed the windows7 on my machine and it didn't
> recognize the my device (casio dt-x10), i installed a XP mode (aka
> Virtual PC) and installed the driver on XP mode and conected the my
> device via activesync (over virtual xp)
>
> But how can i deploy (for debugging) the application with visual stuio
> over activesync (running on xp mode)
> .
>

On 29 Aralık, 21:24, Paul G. Tobey [eMVP] <paultobey _at_ earthlink
_dot_ net> wrote:
> http://msdn.microsoft.com/en-us/library/ms228708.aspx
>
> http://community.opennetcf.com/artic.../08/31/debuggi...
>
> Paul T.
>
>
>
> "tenkyu" wrote:
> > Hi guys;
> > i have a smart device application in Windows CE 4.2 device, when i
> > used winXP, i have connected and deploy app from visual stuio by using
> > activesync connection.
>
> > Last week i installed the windows7 on my machine and it didn't
> > recognize the my device (casio dt-x10), i installed a XP mode (aka
> > Virtual PC) and installed the driver on XP mode and conected the my
> > device via activesync (over virtual xp)
>
> > But how can i deploy (for debugging) the application with visual stuio
> > over activesync (running on xp mode)
> > .- Alıntıyı gizle -
>
> - Alıntıyı göster -

Thanks paul, but my windows7 pc doesn't recognize the device as i
explained, i think this solution not suitable for mt.

I don't see why it wouldn't be applicable, but, if you require an
ActiveSync-like connection, I suppose that there is something like Windows
Mobile Device Center from Vista that you would install under Windows 7 to get
that functionality.

Paul T.

"tenkyu" wrote:

> On 29 Aralık, 21:24, Paul G. Tobey [eMVP] <paultobey _at_ earthlink
> _dot_ net> wrote:
> > http://msdn.microsoft.com/en-us/library/ms228708.aspx
> >
> > http://community.opennetcf.com/artic.../08/31/debuggi...
> >
> > Paul T.
> >
> >
> >
> > "tenkyu" wrote:
> > > Hi guys;
> > > i have a smart device application in Windows CE 4.2 device, when i
> > > used winXP, i have connected and deploy app from visual stuio by using
> > > activesync connection.
> >
> > > Last week i installed the windows7 on my machine and it didn't
> > > recognize the my device (casio dt-x10), i installed a XP mode (aka
> > > Virtual PC) and installed the driver on XP mode and conected the my
> > > device via activesync (over virtual xp)
> >
> > > But how can i deploy (for debugging) the application with visual stuio
> > > over activesync (running on xp mode)
> > > .- Alıntıyı gizle -
> >
> > - Alıntıyı göster -
>
> Thanks paul, but my windows7 pc doesn't recognize the device as i
> explained, i think this solution not suitable for mt.
> .
>

On 31 Aralık 2009, 23:07, Paul G. Tobey [eMVP] <paultobey _at_
earthlink _dot_ net> wrote:
> I don't see why it wouldn't be applicable, but, if you require an
> ActiveSync-like connection, I suppose that there is something like Windows
> Mobile Device Center from Vista that you would install under Windows 7 toget
> that functionality.
>
> Paul T.
>
>
>
> "tenkyu" wrote:
> > On 29 Aralık, 21:24, Paul G. Tobey [eMVP] <paultobey _at_ earthlink
> > _dot_ net> wrote:
> > >http://msdn.microsoft.com/en-us/library/ms228708.aspx
>
> > >http://community.opennetcf.com/artic.../08/31/debuggi....
>
> > > Paul T.
>
> > > "tenkyu" wrote:
> > > > Hi guys;
> > > > i have a smart device application in Windows CE 4.2 device, when i
> > > > used winXP, i have connected and deploy app from visual stuio by using
> > > > activesync connection.
>
> > > > Last week i installed the windows7 on my machine and it didn't
> > > > recognize the my device (casio dt-x10), i installed a XP mode (aka
> > > > Virtual PC) and installed the driver on XP mode and conected the my
> > > > device via activesync (over virtual xp)
>
> > > > But how can i deploy (for debugging) the application with visual stuio
> > > > over activesync (running on xp mode)
> > > > .- Alıntıyı gizle -
>
> > > - Alıntıyı göster -
>
> > Thanks paul, but my windows7 pc doesn't recognize the device as i
> > explained, i think this solution not suitable for mt.
> > .- Alıntıyı gizle -
>
> - Alıntıyı göster -

thanks paul.
it wouldn't suitable because windows7 didnt't recognize the my device
(when i plug-in the device with usb cable, in device manager shown as
unknown device: driver is not acceptable)
if driver installed perfectly, your solutions would be applicable for
me.
Additionally windows7 mobile device center recognize only windows
mobile devices, have you ever plug-in windows ce 4.2 device to WMDC.

>thanks paul.
>it wouldn't suitable because windows7 didnt't recognize the my device
>(when i plug-in the device with usb cable, in device manager shown as
>unknown device: driver is not acceptable)
>if driver installed perfectly, your solutions would be applicable for
>me.
>Additionally windows7 mobile device center recognize only windows
>mobile devices, have you ever plug-in windows ce 4.2 device to WMDC.

My solutions don't require ActiveSync-like connections at all, so they
should work on any Windows machine at all, provided the target device has
network connectivity. I've only used AS for debugging via non-network
interface. I would hope that WMDC has support for serial connections as AS
did and that you should be able to use one to make the connection, but I
don't know that; networking, however, doesn't care, so is a better solution.

Paul T.

On 4 Ocak, 04:52, "Paul G. Tobey [eMVP]" <paul tobey _AT_ earthlink
_DOT_ net> wrote:
> >thanks paul.
> >it wouldn't suitable because windows7 didnt't recognize the my device
> >(when i plug-in the device with usb cable, in device manager shown as
> >unknown device: driver is not acceptable)
> >if driver installed perfectly, your solutions would be applicable for
> >me.
> >Additionally windows7 mobile device center recognize only windows
> >mobile devices, have you ever plug-in windows ce 4.2 device to WMDC.
>
> My solutions don't require ActiveSync-like connections at all, so they
> should work on any Windows machine at all, provided the target device has
> network connectivity. *I've only used AS for debugging via non-network
> interface. *I would hope that WMDC has support for serial connections as AS
> did and that you should be able to use one to make the connection, but I
> don't know that; networking, however, doesn't care, so is a better solution.
>
> Paul T.

I'am waiting the driver new driver update for windows7 from device
vendor.(Casio)