Hello,
I have Intel D865GBF Mother Board and D-Link 538TX NIC, I want to enable
Wake on lan feature but I am not able to find a socket from where I will
connect the powersupply to the NIC. I searched everywhere but could not find
proper documentation. Somebody please help.

--
Regards,
Tirumala
Ph: +91 040 27625289(off)

As far as I know, in new systems there´s no need for an external connection between mainboard and NIC
- it should be supplied by ISA. (of course the mainboard must support WOL !

----- Tirumala wrote: ----

Hello
I have Intel D865GBF Mother Board and D-Link 538TX NIC, I want to enabl
Wake on lan feature but I am not able to find a socket from where I wil
connect the powersupply to the NIC. I searched everywhere but could not fin
proper documentation. Somebody please help

--
Regards
Tirumal
Ph: +91 040 27625289(off

Thank you Andy, It is working without the external connection.

One more question, In WOL can the system be started after it is shut down ?
I tried it when I put it in the sleep mode. Is there a way to remotely start
a system, when the other system was shut down ?
Thanks !
--
Regards,
Tirumala
Ph: +91 040 27625289(off)
"Andy" <(E-Mail Removed)> wrote in message
news:1E56EE83-AEB5-4221-ACBC-(E-Mail Removed)...
> As far as I know, in new systems there´s no need for an external
connection between mainboard and NIC
> - it should be supplied by ISA. (of course the mainboard must support WOL
!)
>
> ----- Tirumala wrote: -----
>
> Hello,
> I have Intel D865GBF Mother Board and D-Link 538TX NIC, I want to
enable
> Wake on lan feature but I am not able to find a socket from where I
will
> connect the powersupply to the NIC. I searched everywhere but could
not find
> proper documentation. Somebody please help.
>
> --
> Regards,
> Tirumala
> Ph: +91 040 27625289(off)
>
>
>