If I install in a W2K Server the RRAS Server, how can I configure it connect 2 sub-nets that are on the same LAN
One LAN have the Network ID: 192.168.10.0 (that is conected with a Proxy Server) and the other 172.16.32.0 both with net mask 255.255.255.0
My W2K Server has 2 NICs, each one configured with one network ID

Thanks.

The wizard should have automated this for you when you set up RRAS. If you
aren't using this for anything else, its easier to disable RRAS and follow
the wizard. Choose custom setup, then LAN routing.

If you are using it for other services, right click the server in RRAS and
put a check mark in the box next to router.

"Ricardo" <(E-Mail Removed)> wrote in message
news:E133FAA0-F803-4103-BCA0-(E-Mail Removed)...
> If I install in a W2K Server the RRAS Server, how can I configure it
connect 2 sub-nets that are on the same LAN ?
> One LAN have the Network ID: 192.168.10.0 (that is conected with a Proxy
Server) and the other 172.16.32.0 both with net mask 255.255.255.0.
> My W2K Server has 2 NICs, each one configured with one network ID.
>
> Thanks.