Hi Mike,
I am pretty new with NBL. I like to setup a print cluster for 2 nodes.
Each has 2 NICs. Could you tell me how to connect private network.
Should I connect these 2 private NICs to a sperate hub/switch? I am
confused. If you have any other info how to setup print cluster,
please let me know.
Thanks,
TL
Mark Bradley wrote:
> Not sure if it helps but I have always had the same problem with NLB when
> connecting to a cluster from a client that has had an existing connection.
> The session will always connect to the same node.
>
> If it is a new connection from the same session it will connect to the same
> node even if the node is offline.
>
> What I have found is that if the cluster has both nodes online then it will
> load balance different client connections to it but has no intelligence if a
> server is down.
>
> I may be wrong but I don't think it can allow fault tolerance for clients
> already connected.
>
>
> "Michal Ch" wrote:
>
> > Hi all
> > I've 2 server Dell PowerEgde 1855 connected to PowerConnect 5324
> > Each server have 2 NIC with Teaming (Adaptive Load Balancing)
> > First server have IP 192.168.1.22 on teaming card (virtual card)
> > Second server have IP 192.168.1.23 on teaming card (virtual card)
> >
> > I would like to create NLB (cluster IP ) - 192.168.1.10
> > If I create NLB with Unicast mode working very slow - don't connect every
> > time.
> >
> > If I create NLB with Multicast mode I have strange problem.
> > In Affinity - single
> > From network 192.168.1.0/24 ping on IP 192.168.1.10 and 1.22 and 1.23
> > working without problems.
> > But when connect with mstsc.exe to 192.168.1.10 I always connect to server
> > 192.168.1.22
> > But I shutdown server 192.168.1.22 I couldn't connect to TSfarm and only
> > 192.168.1.23 respond.
> >
> > From network 192.168.0.0/24 ping on 192.168.1.22 and 1.23 working without
> > problems,but doesn't work 192.168.1.10
> > But when connect with mstsc.exe to 192.168.1.10 I couldn't connect to server
> > 192.168.1.22
> > But I shutdown server 192.168.1.22 I couldn't connect to TSfarm and only
> > 192.168.1.23 respond.
> >
> > In Affinity - none
> > From network 192.168.1.0/24 ping on IP 192.168.1.10 and 1.22 and 1.23
> > working without problems.
> > But when connect with mstsc.exe to 192.168.1.10 I always connect to server
> > 192.168.1.22
> > But I shutdown server 192.168.1.22 I couldn't connect to TSfarm and only
> > 192.168.1.23 respond.
> >
> > From network 192.168.0.0/24 ping on 192.168.1.10 and 1.23 working without
> > problems,but doesn't work 192.168.1.22. Bit sometime ping on 192.168.1.22 is
> > working
> > But when connect with mstsc.exe to 192.168.1.10 I always connect to server
> > 192.168.1.23
> > But I shutdown server 192.168.1.23 I couldn't connect to TSfarm
> >
> >
> > Could you tell me what is work with my configuration?
> >
> > Have a nice day,
> > Michal
> >
> >
> >
|
Similar Threads
