I have a Toshiba P105 and it was loaded with the Conexant Sound. After the
installation of RC1 my sound stopped working. Currently it appears the
Microsoft drivers are loaded. It recognizes the device as High Definition
Audio. I try to load the Conexant XP drivers an it fails.

In device properties this is the following error:

This device cannot start. (Code 10)

I have searched the web and tried virtually all of the different drivers
from RealTek and Conexant. I cannot find Conexant Vista drivers, like
everyone else. I am not sure what sound card/chip that is in my laptop. I
have the Intel 945 GM Express chipset.

Along with this issue I also have in Other Devices drivers that did not load
in Mass Storage Controller and Unknown Device.

If anyone has recommendations on how to solve I would greatly appreciate the
assistance. Toshiba is no help since this is only RC1. You would think
Toshiba would be up to speed with Microsoft.

Thanks for your help.

James

--
Efficinet Inc.
--
Efficinet Inc.

Check out my post 5 posts down to Smoke286. Maybe it helps you out.

And you don't need to post 4 times to get your point across

Petar Smilajkov
PeconiHosting.com Owner/Founder

"James M" <(E-Mail Removed)> wrote in message
news:FB70F40E-FC21-4B71-BD12-(E-Mail Removed)...
>I have a Toshiba P105 and it was loaded with the Conexant Sound. After the
> installation of RC1 my sound stopped working. Currently it appears the
> Microsoft drivers are loaded. It recognizes the device as High Definition
> Audio. I try to load the Conexant XP drivers an it fails.
>
> In device properties this is the following error:
>
> This device cannot start. (Code 10)
>
> I have searched the web and tried virtually all of the different drivers
> from RealTek and Conexant. I cannot find Conexant Vista drivers, like
> everyone else. I am not sure what sound card/chip that is in my laptop.
> I
> have the Intel 945 GM Express chipset.
>
> Along with this issue I also have in Other Devices drivers that did not
> load
> in Mass Storage Controller and Unknown Device.
>
> If anyone has recommendations on how to solve I would greatly appreciate
> the
> assistance. Toshiba is no help since this is only RC1. You would think
> Toshiba would be up to speed with Microsoft.
>
> Thanks for your help.
>
> James
>
> --
> Efficinet Inc.
> --
> Efficinet Inc.

Petar....thanks for the idea, but I did try that with no luck. As for the
post, I kept getting an error saying the post did not go....guess it actually
did

Thanks for the feedback.

James
--
Efficinet Inc.


"Lincoln 6 Echo" wrote:

> Check out my post 5 posts down to Smoke286. Maybe it helps you out.
>
> And you don't need to post 4 times to get your point across
>
> Petar Smilajkov
> PeconiHosting.com Owner/Founder
>
> "James M" <(E-Mail Removed)> wrote in message
> news:FB70F40E-FC21-4B71-BD12-(E-Mail Removed)...
> >I have a Toshiba P105 and it was loaded with the Conexant Sound. After the
> > installation of RC1 my sound stopped working. Currently it appears the
> > Microsoft drivers are loaded. It recognizes the device as High Definition
> > Audio. I try to load the Conexant XP drivers an it fails.
> >
> > In device properties this is the following error:
> >
> > This device cannot start. (Code 10)
> >
> > I have searched the web and tried virtually all of the different drivers
> > from RealTek and Conexant. I cannot find Conexant Vista drivers, like
> > everyone else. I am not sure what sound card/chip that is in my laptop.
> > I
> > have the Intel 945 GM Express chipset.
> >
> > Along with this issue I also have in Other Devices drivers that did not
> > load
> > in Mass Storage Controller and Unknown Device.
> >
> > If anyone has recommendations on how to solve I would greatly appreciate
> > the
> > assistance. Toshiba is no help since this is only RC1. You would think
> > Toshiba would be up to speed with Microsoft.
> >
> > Thanks for your help.
> >
> > James
> >
> > --
> > Efficinet Inc.
> > --
> > Efficinet Inc.
>

OK...thought this may help someone. I have a Toshiba P105 with the Conexant
High Definition Audio. Upon installing Vista RC1 I got no sound. At first
the driver loaded but I got the Code 10 error stating the driver could not
start. After deinstalling the device I could not get the driver installed. I
searched all the blogs and news boards. I found a lot of people with the
same issue and some recommendations but nothing worked.

Here is what worked for me and I hope it works for you. I tried previously
loading the XP drivers that came with my system and nothing worked. This
time, instead or running the zip file automatically I unpacked it into a
separate folder. I then went in and selected each application file's
properties and set the compatibility to XP SP2. I then went in to the device
and performed a driver update and selected my own location where the modified
files were. The results were it installed immediately and began working
immediately

All I can say is One Challenge Down and Two to Go! Hope that helps someone.

James

--
Efficinet Inc.


"Lincoln 6 Echo" wrote:

> Check out my post 5 posts down to Smoke286. Maybe it helps you out.
>
> And you don't need to post 4 times to get your point across
>
> Petar Smilajkov
> PeconiHosting.com Owner/Founder
>
> "James M" <(E-Mail Removed)> wrote in message
> news:FB70F40E-FC21-4B71-BD12-(E-Mail Removed)...
> >I have a Toshiba P105 and it was loaded with the Conexant Sound. After the
> > installation of RC1 my sound stopped working. Currently it appears the
> > Microsoft drivers are loaded. It recognizes the device as High Definition
> > Audio. I try to load the Conexant XP drivers an it fails.
> >
> > In device properties this is the following error:
> >
> > This device cannot start. (Code 10)
> >
> > I have searched the web and tried virtually all of the different drivers
> > from RealTek and Conexant. I cannot find Conexant Vista drivers, like
> > everyone else. I am not sure what sound card/chip that is in my laptop.
> > I
> > have the Intel 945 GM Express chipset.
> >
> > Along with this issue I also have in Other Devices drivers that did not
> > load
> > in Mass Storage Controller and Unknown Device.
> >
> > If anyone has recommendations on how to solve I would greatly appreciate
> > the
> > assistance. Toshiba is no help since this is only RC1. You would think
> > Toshiba would be up to speed with Microsoft.
> >
> > Thanks for your help.
> >
> > James
> >
> > --
> > Efficinet Inc.
> > --
> > Efficinet Inc.
>