Hi all... me again.


Well I figured out the user password is :
user/password
But I think user login is not enough.
What should be the admin user/password for conexant router?

Additional info:
Firmware Version: ETHADSL_USB_032002_REL9
Showtime Firmware Version: 2.33a
Customer Software Version: ETHADSL_USB_032002_REL9

Guy

In news:(E-Mail Removed),
Guy Cohen <(E-Mail Removed)> had this to say:

My reply is at the bottom of your sent message:

> Hi all... me again.
>
>
> Well I figured out the user password is :
> user/password
> But I think user login is not enough.
> What should be the admin user/password for conexant router?
>
> Additional info:
> Firmware Version: ETHADSL_USB_032002_REL9
> Showtime Firmware Version: 2.33a
> Customer Software Version: ETHADSL_USB_032002_REL9
>
> Guy

I'd try password, conexant, wiselink for the passwords (try all caps too)
and the user would be admin probably.

Questions like these are, don't take this wrong, tough to decide to answer
or not. The idea that we could potentially be helping someone to violate
either business policy or the law (remember we do this blind so to speak in
that we only know what you tell us) is generally against what a lot of
people will do here. Baring this my next options would be to see about a
firmware update which would make sure the password was set to default
again - or so it usually seems to.

Galen
--

"You know that a conjurer gets no credit when once he has explained his
trick; and if I show you too much of my method of working, you will
come to the conclusion that I am a very ordinary individual after all."

Sherlock Holmes

Thanks for the reply Galen
Non of the suggestions worked
Of course I understand the dilemma
TY
Guy


"Galen" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> In news:(E-Mail Removed),
> Guy Cohen <(E-Mail Removed)> had this to say:
>
> My reply is at the bottom of your sent message:
>
>> Hi all... me again.
>>
>>
>> Well I figured out the user password is :
>> user/password
>> But I think user login is not enough.
>> What should be the admin user/password for conexant router?
>>
>> Additional info:
>> Firmware Version: ETHADSL_USB_032002_REL9
>> Showtime Firmware Version: 2.33a
>> Customer Software Version: ETHADSL_USB_032002_REL9
>>
>> Guy
>
> I'd try password, conexant, wiselink for the passwords (try all caps too)
> and the user would be admin probably.
>
> Questions like these are, don't take this wrong, tough to decide to answer
> or not. The idea that we could potentially be helping someone to violate
> either business policy or the law (remember we do this blind so to speak
> in that we only know what you tell us) is generally against what a lot of
> people will do here. Baring this my next options would be to see about a
> firmware update which would make sure the password was set to default
> again - or so it usually seems to.
>
> Galen
> --
>
> "You know that a conjurer gets no credit when once he has explained his
> trick; and if I show you too much of my method of working, you will
> come to the conclusion that I am a very ordinary individual after all."
>
> Sherlock Holmes
>

I have one, i THINK the default password was 'oddessey' (or however you
spell it)


"Guy Cohen" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Thanks for the reply Galen
> Non of the suggestions worked
> Of course I understand the dilemma
> TY
> Guy
>
>
> "Galen" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > In news:(E-Mail Removed),
> > Guy Cohen <(E-Mail Removed)> had this to say:
> >
> > My reply is at the bottom of your sent message:
> >
> >> Hi all... me again.
> >>
> >>
> >> Well I figured out the user password is :
> >> user/password
> >> But I think user login is not enough.
> >> What should be the admin user/password for conexant router?
> >>
> >> Additional info:
> >> Firmware Version: ETHADSL_USB_032002_REL9
> >> Showtime Firmware Version: 2.33a
> >> Customer Software Version: ETHADSL_USB_032002_REL9
> >>
> >> Guy
> >
> > I'd try password, conexant, wiselink for the passwords (try all caps
too)
> > and the user would be admin probably.
> >
> > Questions like these are, don't take this wrong, tough to decide to
answer
> > or not. The idea that we could potentially be helping someone to violate
> > either business policy or the law (remember we do this blind so to speak
> > in that we only know what you tell us) is generally against what a lot
of
> > people will do here. Baring this my next options would be to see about a
> > firmware update which would make sure the password was set to default
> > again - or so it usually seems to.
> >
> > Galen
> > --
> >
> > "You know that a conjurer gets no credit when once he has explained his
> > trick; and if I show you too much of my method of working, you will
> > come to the conclusion that I am a very ordinary individual after all."
> >
> > Sherlock Holmes
> >
>
>

Found by googling ETHADSL_USB_032002_REL9 and password, 4:th out of 4 hits:

[ ] By default the "admin" password can be "epicrouter", "password" or "conextant" depending on who supplied the router.

/David

Andrew Story wrote:
> I have one, i THINK the default password was 'oddessey' (or however you
> spell it)
>
>
> "Guy Cohen" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>
>>Thanks for the reply Galen
>>Non of the suggestions worked
>>Of course I understand the dilemma
>>TY
>>Guy
>>
>>
>>"Galen" <(E-Mail Removed)> wrote in message
>>news:(E-Mail Removed)...
>>
>>>In news:(E-Mail Removed),
>>>Guy Cohen <(E-Mail Removed)> had this to say:
>>>
>>>My reply is at the bottom of your sent message:
>>>
>>>
>>>>Hi all... me again.
>>>>
>>>>
>>>>Well I figured out the user password is :
>>>>user/password
>>>>But I think user login is not enough.
>>>>What should be the admin user/password for conexant router?
>>>>
>>>>Additional info:
>>>>Firmware Version: ETHADSL_USB_032002_REL9
>>>>Showtime Firmware Version: 2.33a
>>>>Customer Software Version: ETHADSL_USB_032002_REL9
>>>>
>>>>Guy
>>>
>>>I'd try password, conexant, wiselink for the passwords (try all caps
>
> too)
>
>>>and the user would be admin probably.
>>>
>>>Questions like these are, don't take this wrong, tough to decide to
>
> answer
>
>>>or not. The idea that we could potentially be helping someone to violate
>>>either business policy or the law (remember we do this blind so to speak
>>>in that we only know what you tell us) is generally against what a lot
>
> of
>
>>>people will do here. Baring this my next options would be to see about a
>>>firmware update which would make sure the password was set to default
>>>again - or so it usually seems to.
>>>
>>>Galen
>>>--
>>>
>>>"You know that a conjurer gets no credit when once he has explained his
>>>trick; and if I show you too much of my method of working, you will
>>>come to the conclusion that I am a very ordinary individual after all."
>>>
>>>Sherlock Holmes
>>>
>>
>>
>
>

THANK U
epicrouter worked for me
what does that mean ? who is the MFR?
Guy


"David D" <(E-Mail Removed)> wrote in message
news:e$(E-Mail Removed)...
> Found by googling ETHADSL_USB_032002_REL9 and password, 4:th out of 4
> hits:
>
> [ ] By default the "admin" password can be "epicrouter", "password" or
> "conextant" depending on who supplied the router.
> /David
>
> Andrew Story wrote:
>> I have one, i THINK the default password was 'oddessey' (or however you
>> spell it)
>>
>>
>> "Guy Cohen" <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed)...
>>
>>>Thanks for the reply Galen
>>>Non of the suggestions worked
>>>Of course I understand the dilemma
>>>TY
>>>Guy
>>>
>>>
>>>"Galen" <(E-Mail Removed)> wrote in message
>>>news:(E-Mail Removed)...
>>>
>>>>In news:(E-Mail Removed),
>>>>Guy Cohen <(E-Mail Removed)> had this to say:
>>>>
>>>>My reply is at the bottom of your sent message:
>>>>
>>>>
>>>>>Hi all... me again.
>>>>>
>>>>>
>>>>>Well I figured out the user password is :
>>>>>user/password
>>>>>But I think user login is not enough.
>>>>>What should be the admin user/password for conexant router?
>>>>>
>>>>>Additional info:
>>>>>Firmware Version: ETHADSL_USB_032002_REL9
>>>>>Showtime Firmware Version: 2.33a
>>>>>Customer Software Version: ETHADSL_USB_032002_REL9
>>>>>
>>>>>Guy
>>>>
>>>>I'd try password, conexant, wiselink for the passwords (try all caps
>>
>> too)
>>
>>>>and the user would be admin probably.
>>>>
>>>>Questions like these are, don't take this wrong, tough to decide to
>>
>> answer
>>
>>>>or not. The idea that we could potentially be helping someone to violate
>>>>either business policy or the law (remember we do this blind so to speak
>>>>in that we only know what you tell us) is generally against what a lot
>>
>> of
>>
>>>>people will do here. Baring this my next options would be to see about a
>>>>firmware update which would make sure the password was set to default
>>>>again - or so it usually seems to.
>>>>
>>>>Galen
>>>>--
>>>>
>>>>"You know that a conjurer gets no credit when once he has explained his
>>>>trick; and if I show you too much of my method of working, you will
>>>>come to the conclusion that I am a very ordinary individual after all."
>>>>
>>>>Sherlock Holmes
>>>>
>>>
>>>
>>