What components do I need to get "NETSH INTERFACE IPV6" working properly ?

I have included various IPV6 components but NETSH gives "The following
helper DLL cannot be loaded: IPV6MON.DLL" on startup and obviously no IPV6
supports and no IPV6 DLL's in SHOW HELPER.

Thanks

On Jul 21, 9:34*am, Ian_m <ia...@bvmltd.co.uk> wrote:
> What components do I need to get "NETSH INTERFACE IPV6" working properly ?
>
> I have included various IPV6 components but NETSH gives "The following
> helper DLL cannot be loaded: IPV6MON.DLL" on startup and obviously no IPV6
> supports and no IPV6 DLL's in SHOW HELPER.
>
> Thanks

TCP/IP Version 6 Utilities contains the file that you were asking
about. It also contains a number of other resources that the netsh
ipv6 funtionality will probably need.

For future reference, you can filter the list of components shown in
Target Designer. Add a new filter and add the filter rule "Component
contains the following file:". Then type in whatever file you are
looking for. The ability to filter down the component list for exactly
what you are looking for is quite powerful.

Kyle

> >TCP/IP Version 6 Utilities contains the file that you were asking
> >about. It also contains a number of other resources that the netsh
> >ipv6 funtionality will probably need.
>
> Netsh is a little bit picky, when certain components (I did not write
> them down, I am afraid) are missing netsh is available, but some of
> its options are missing. I had to add a lot to get a full netsh, but
> it was necessary for being able to batch some IP settings.

If I add "Networking Application Compatibility" netsh interface ipv6
commands work fine, but the resulting image is massive (IIS etc etc).

I have added "TCP/IP Version 6", "TCP/IP Version 6 Service", "TCP/IP Version
6 Utilities" and "NetIP6 Inf" and no luck with netsh ipv6 commands (netsh
ipv4 commands work fine).

just my experience showed me that we need these components to activate
the netsh command line tool.

"Windows XP Service Pack 2 Resource DLL" : needed to activate netsh
firewall command
"Network Command Shell Interface Context" : needed to activate netsh
interface command

HTH
Taha